Localized deformation due to Portevin-LeChatelier effect in 18Mn-0.6C TWIP austenitic steel

ISIJ International

Volumn 47, Issue 12, 2007, Pages 1804-1812

  Chen, Lei ^a   Kim, Han Soo ^a   Kim, Sung Kyu ^b   De Cooman, B C ^a  

^a Pohang University of Science and Technology (POSTECH)   (South Korea)

^b Technical Research Laboratories   (South Korea)

Author keywords

Dynamic strain aging; Thermo mechanical properties; TWIP steel

Indexed keywords

PLASTIC DEFORMATION; STACKING FAULTS; STRESS-STRAIN CURVES; TENSILE PROPERTIES; THERMOGRAPHY (IMAGING);

DISLOCATION DENSITY; MOBILE DISLOCATION; STRAIN AGING PROCESSES; STRAIN RATE SENSITIVITY;

AUSTENITIC STEEL;

EID: 39149108109     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.47.1804     Document Type: Article

References (27)

1. O. Grässel, L. Krüger, G. Frommeyer and L. W. Meyer: Int. J. Plast., 16 (2000), 1391.
2. S. Allain, J.-P. Chateau and O. Bouaziz: Mater. Sci. Eng. A, A387-389 (2004), 143.
3. S. Allain: Doctoral Thesis, Institut National Polytechnique de Lorraine, (2002).
4. O. Bouaziz and N. Guelton: Mater. Sci. Eng. A, A319-321 (2001), 246.
5. S. Vercammen: Doctoral Thesis, Katholieke Universiteit Leuven, (2004).
6. Y. N. Dastur and W. C. Leslie: Metall. Trans. A, 12A (1981), 749.
7. I. Karaman, H. Sehitoglu, K. Gall, Y. I. Chumlyakov and H. J. Maier: Acta Mater., 48, (2000), 1345.
8. S. Kibey, J. B. Liu, M. J. Curtis, D. D. Johnson and H. Sehitoglu: Acta Mater., 54 (2006), 2991.
9. E. Bayraktar, F. A. Khalid and C. Levaillant: J. Mater. Process. Technol., 147 (2004), 145.
10. B. X. Huang, X. D. Wang, Y. H. Rong, L. Wang and L. Jin: Mater. Sci. Eng. A, A438-440, (2006), 306.
11. W. S. Owen and M. Grugicic: Acta Mater., 47 (1999), No. 1, 111.
12. V. Gerold and H. P. Karnthaler: Acta Metall., 37 (1989), 2177.
13. F. Laves: Acta Metall., 14 (1966), 58.
14. J. W. Cahn: Acta Metall., 25 (1621), 1977.
15. L. Green and M. Cohen: Acta Metall., 27 (1523), 1979.
16. L. P. Kubin and Y. Estrin: J. Phys. III, (1991), 929.
17. L. J. Cuddy and W. C. Leslie: Acta Metall., 20 (1972), 1157.
18. S. G. Hong, K. O. Lee and S. B. Lee: Int. J. Fatigue, 27 (2005), 1420.
19. S. H. Hong and Y. S. Han: Ser. Metall. Mater., 32 (1995), No. 9, 1489.
20. A. Wijler, J. Schade van Westrum and A. Vanden Beukel: Acta Metall., 20 (1972), 355.
21. W. F. Hosford and R. M. Caddell: Metal Forming, Prentice-Hall International Inc., Englewood Cliffs, NJ, (2006), 309.
22. J. A. Shaw and S. Kyriakides: Int. J. Plast., 13 (1998), No. 10, 837.
23. S. Kyriakides and J. E. Miller: J. Appl. Mech., 67 (2000), 645.
24. A. Wijler and A. van den Beukel: Scr. Metall., 4 (1970), 705.
25. R. Sandstrom and R. Lagneborg: Scand. J. Metall., 3 (1974), 205.
26. S. R. Kalidindi: Int. J. Plast., 14 (1998), 1265.
27. P. Sittner, Y. Liu and V. Novak: J. Mech. Phys. Solids, 53 (2005), 1719.