Solutions of beam-shaped-function for analysis of composite plates with embedded delaminations

Archive of Applied Mechanics

Volumn 82, Issue 4, 2012, Pages 573-589

  Han, Haitao ^a   Lu, Zixing ^a   Zhang, Jordan Zheng ^a  

^a BEIHANG UNIVERSITY   (China)

Author keywords

Composite; Delamination; Modeling; Plates

Indexed keywords

BEAM ANALYSIS; CLOSED FORM SOLUTIONS; COMPOSITE PLATES; DEFLECTION AMPLITUDE; EMBEDDED DELAMINATIONS; MINIMUM POTENTIAL ENERGY PRINCIPLE; MIS-MATCH RATIO; PLATES; SUPPORT CONDITIONS; THREE DIMENSIONAL FINITE ELEMENTS;

COMPOSITE MATERIALS; ENERGY RELEASE RATE; FINITE ELEMENT METHOD; LOADING; MODELS;

DELAMINATION;

EID: 84860223021     PISSN: 09391533     EISSN: 14320681     Source Type: Journal    
DOI: 10.1007/s00419-011-0573-5     Document Type: Article

References (48)

1. Nishimura, A., Aotani, H.: New fabric structures for composites. In: Recent Advances in Japan and the United States, Proceedings of Composites' 86, pp. 29-36. Tokyo, Japan, June (1986)
2. Simitses, G.J.: Delamination buckling of flat laminates. In: Turvey, G.J., Marshall, I.H. (eds.) Buckling and Postbuckling of Composite Plates, pp. 299-328. Chapman and Hall, London (1995)
3. Antonio, M., Miguel, A.J.: Application of the finite element method to prediction of onset of delamination growth. Appl. Mech. Rev. 55(2), 89-106 (2002)
4. Tay, T.E.: Characterization and analysis of delamination fracture in composites: an overview of developments from 1990 to 2001. Appl. Mech. Rev. 56(1), 1-32 (2003)
5. Garg, A.C.: Delamination-a damage mode in composite structures. Eng. Fract. Mech. 29(5), 557-584 (1988)
6. Bolotin, V.V.: Delaminations in composite structures: its origin, buckling, growth and stability. Compos. Part B-ENG. 27(2), 129-145 (1996) (Pubitemid 126350978)
7. Pagano, N.J., Schoeppner, G.A. : Delamination of polymer matrix composites: problems and assessment. In: Kelly, A., Zweben, C. (eds.) Comprehensive Composite Materials, vol. 2, pp. 433-528. Elsevier, Oxford (2000)
8. David, J.E., Rodney, S.T., Minh, Q.N., Murray, L.S.: Review of delamination predictive methods for low speed impact of composite laminates. Compos. Struct. 66(1-4), 677-683 (2004)
9. Chai, H., Babcock, C.D., Knauss, W.G.: One dimensional modeling of failure in laminated plates by delamination buckling. Int. J. Solids Struct. 17(11), 1069-1083 (1981) (Pubitemid 12433563)
10. Parlapalli, M., Shu, D.W.: Buckling analysis of two-layer beams with an asymmetric delamination. Eng. Struct. 26(5), 651-658 (2004) (Pubitemid 38454221)
11. John, J.T., Gerard, C.P.: Effect of delamination on the natural frequencies of composite laminates. J. Compos. Mater. 23(12), 1200-1215 (1989)
12. Schapery, R.A., Davidson, B.D.: Prediction of energy release rate for mixed-mode delamination using classical plate theory. Appl. Mech. Rev. 43(5), S281-S287 (1990)
13. Suo, Z., Hutchinson, J.W.: Interface crack between two elastic layers. Int. J. Fract. 43(1), 1-18 (1990) (Pubitemid 21668222)
14. Kardomateas, G.A., Schmueser, D.W.: Buckling and postbuckling of delaminated composites under compressive loads including transverse shear effects. AIAA J. 26(2), 337-343 (1988) (Pubitemid 18632063)
15. Chen, H.P.: Shear deformation theory for compressive delamination buckling and growth. AIAA J. 29(5), 813-819 (1991)
16. Kyoung, W.M., Kim, C.G.: Delamination buckling and growth of composite laminated plates with transverse shear deformation. J. Compos. Mater. 29(15), 2047-2068 (1995)
17. Gu, H.Z., Chattopadhyay, A.: A new higher-order plate theory in modeling delamination buckling of composites. In: 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Hilton Head, SC, April, . pp. 504-513 (1994)
18. Rodman, U., Saje, M., Planinc, I., Zupan, D.: Exact buckling analysis of composite elastic columns including multiple delaminations and transverse shear. Eng. Struct. 30(6), 1500-1514 (2008) (Pubitemid 351650195)
19. Lim, Y.B, Parsons, I.D.: The linearized buckling analysis of a composite beam with multiple delaminations. Int. J. Solids Struct. 30(22), 3085-3099 (1992)
20. Kutlu, Z., Chang, F.K.: Composite panels containing multiple through-the-width delaminations and subjected to compression, part I: analysis. Compos. Struct. 31(4), 273-296 (1995)
21. Kutlu, Z., Chang, F.K.: Composite panels containing multiple through-the-width delaminations and subjected to compression, part II: experiments and verification. Compos. Struct. 31(4), 297-314 (1995)
22. Haiying, H., Kardomateas, G.A.: Buckling of orthotropic beam plates with multiple central delaminations. Int. J. Solids Struct. 35(13), 1355-1362 (1998) (Pubitemid 128397980)
23. Wang, J.L., Qiao, P.Z.: Novel beam analysis of end notched flexure specimen for mode-II fracture. Eng. Fract. Mech. 71(2), 219-231 (2004)
24. Wang, J.L., Qiao, P.Z.: Interface crack between two shear deformable elastic layers. J. Mech. Phys. Solids. 52(4), 891-905 (2004)
25. Tawk, I., Navarro, P., Ferrero, J.F., Barrau, J.J., Abdullah, E.: Composite delamination modelling using a multi-layered solid element. Compos. Sci. Technol. 70(2), 207-214 (2010)
26. Rajbhandari, S.P.: Parametric finite element modeling of monolithic composite structures for impact damage. Thesis of Engineering Master, Royal Melbourne Institute of Technology, Melbourne, Australia (2003)
27. Mi, Y., Crisfield, M.A., Davies, G., Hellweg, H.B.: Progressive delamination using interface elements. J. Compos. Mater. 32(14), 1246-1272 (1998) (Pubitemid 128619971)
28. Nishikawa, M., Okabe, T., Takeda, N.: Numerical simulation of interlaminar damage propagation in CFRP cross ply laminates under transverse loading. Int. J. Solids Struct. 44(10), 3101-3113 (2007) (Pubitemid 46415631)
29. Orifici, A.C., Herszberg, I., Thomson, R.S.: Review of methodologies for composite material modeling incorporating failure. Compos. Struct. 86(1-3), 194-210 (2008)
30. Harper, P.W., Hallet, S.R.: Cohesive zone length in numerical simulations of composite delamination. Eng. Fract. Mech. 75(16), 4774-4792 (2008)
31. Tay, T.E., Liu, G., Tan, V.B.C., Sun, X.S., Pham, D.C.: Progressive failure analysis of composites. J. Compos. Mater. 42(18), 1921-1966 (2008)
32. Fleming, D.C.: Delamination modeling of composites for improved crash analysis, National Aeronautics and Space Administration, Langley Research Center, Hampton, Virginia, USA, NASA CR-1999-209725, (1999)
33. Xie, D., Biggers, S.B.: Progressive crack growth analysis using interface element based on the virtual crack closure technique. Finite Elem. Anal. Des. 42(11), 977-984 (2006) (Pubitemid 43777011)
34. Meo, M., Thieulot, E.: Delamination modelling in a double cantilever beam. Compos. Struct. 71(3-4), 429-434 (2005) (Pubitemid 41715434)
35. Krueger, R.: The virtual crack closure technique: history, approach and applications. National Aeronautics and Space Administration, Washington DC, USA, NASA/TM-2002-211628 (2002)
36. Davidson, B.D.: Prediction of energy release rate for edge delamination using a crack tip element approach. Composite Materials: Fatigue and Fracture, ASTM STP 1230, vol. 5. American Society for Testing and Materials (1995)
37. Crisfield, M.A., Jelenic, G., Mi, Y., Zhong, H.G., Fan, Z.: Some aspects of the non-linear finite elementmethod. Finite Elem. Anal. Des. 27(1), 19-40 (1997)
38. Sheinman, I., Bass, M., Ishai, O.: Effect of delamination on stability of laminated composite strip.Compos. Struct. 11(3), 227-242 (1989)
39. Moradi, S., Taheri, F.: Differential quadrature approach for delamination buckling analysis of composites with shear deformation. AIAA J. 36(10), 1869-1873 (1998) (Pubitemid 128551071)
40. Moradi, S., Taheri, F.: Application of differential quadraturemethod to the delamination buckling of composite plates. Comput. Struct. 70(6), 615-623 (1999)
41. Chen, D., Chen, C., Fu, Y.: The postbuckling analysis of laminated circular plate with elliptic delamination. Commun. Nonlinear Sci. Numer. Simulat. 16(1), 537-549 (2011)
42. Alnefaie, K.: Finite element modeling of composite plates with internal delamination. Compos. Struct. 90(1), 21-27 (2009)
43. Han, H.T, Lu, Z.X., Jordan, Z.Z., Guo, J.H.: Delamination analysis of composite laminates using an advanced beam theory. Mech. Adv. Mater. Struc. doi:10.1080/15376494.2011.582981
44. Washizu, K.: Variational Methods in Elasticity and Plasticity, 2nd edn. Pergamon Press, Oxford (1975)
45. Meng, Q.C, Zhang, X.: Analytical-variational and generalized weighted conservative integral method on solution of interfacial cracks with their applications to bi-metal glued joints. Eng. Fract. Mech. 52(6), 1127-1137 (1995)
46. Griffith, A.A.: The phenomena of rupture and flow in solids. Phil. Trans. R. Soc. A 221, 163-198 (1920)
47. Irwin, G.R.: Fracture Dynamics, Fracturing of Metals. pp. 147-166. American Society for Metals, Cleveland (1948)
48. Murakami, Y.: Stress intensity factors handbook. Pergamon press, p. 434 (1986)