Study of erosion resistance and mechanical properties of unsaturated polyester based nano-composites

IEEE Transactions on Dielectrics and Electrical Insulation

Volumn 19, Issue 2, 2012, Pages 373-382

  Nehete, Kanchan ^a   Sharma, Ram A ^a   Chaudhari, Lokesh ^a   Bhattacharya, Subhendu ^a   Singal, Vivek ^a   D'Melo, Dawid ^a  

^a CROMPTON GREAVES LTD   (India)

Author keywords

Nanotechnology; resin insulation; surface discharges

Indexed keywords

CROSS-LINKING DENSITY; ELECTRICAL EROSION; EROSION RESISTANCE; INSULATION SYSTEM; MECHANICAL AND THERMAL PROPERTIES; OPTIMUM CONCENTRATION; PARTICLE MORPHOLOGIES; POLYMER COMPOSITE; SILANE COUPLING AGENT; SPHERICAL PARTICLE; UNSATURATED POLYESTER;

COUPLING AGENTS; ELECTRIC PROPERTIES; EROSION; ESTERS; NANOCOMPOSITES; NANOPARTICLES; NANOTECHNOLOGY; PLATELETS; SURFACE DISCHARGES;

MECHANICAL PROPERTIES;

EID: 84860119740     PISSN: 10709878     EISSN: None     Source Type: Journal    
DOI: 10.1109/TDEI.2012.6180228     Document Type: Article

References (27)

1. Q.Q. Lei, X. Wang and L.J. He, "Review, thinking and countermeasure about engineering dielectric theory", High Voltage Eng. (China), Vol. 33, pp. 1-4, 2007 (in Chinese).
2. J.C. Fothergill, G.C. Montanari, G.C. Stevens, C. Laurent, G. Teyssedre, L.A. Dissado, U.H. Nilsson and G. Platbrood, "Electrical nanostructural, physical and chemical characterization of HV XLPE cable peelings for an electrical aging diagnostic data base", IEEE Trans. Dielectr. Electr. Insul., Vol. 10, pp. 514-527, 2003.
3. S.A. Boggs, "Partial discharge: Overview and signal generation", IEEE Electr. Insul. Mag., Vol. 6, pp. 33-39, 1994.
4. V. Vahidinasab, A. Mossalanejad and A. Gholami, "Partial discharge theory modeling and applications to electrical machines", 5th WSEAS/IASME Int'l. Conf. Electric Power Systems, High Voltages, Electric Machines, Tenerife, Spain, pp.130-135, 2005.
5. S. Li, G. Yin, G. Chen, J. Li, S. Bai, L. Zhong, Y. Zhang and Q. Lei, "Short-term breakdown and long-term failure in nanodielectrics: A review", IEEE Trans Dielectr. Electr. Insul., Vol. 17, pp. 1523-1535, 2010.
6. C.H. Lee and J.J. Park, "The partial discharge resistance of epoxy micro and nano composites", Trans. Electr. Electron. Mater., Vol. 11, pp. 89-91, 2010.
7. Z. Li, K. Okamoto, Y. Okhi and T. Tanaka, "Effects on nano-filler addition on partial discharge resistance and dielectric breakdown strength of micro-Al2O3 epoxy nano-composites", IEEE Trans Dielectr. Electr. Insul., Vol. 17, pp. 653-661, 2010.
8. P. Maity, S. Basu, V. Parameswaran and N. Gupta, "Degradation of polymer dielectrics with nanometric metal-oxide fillers due to surface discharges", IEEE Trans. Dielectr. Electr. Insul., Vol. 15, pp. 52-62, 2008.
9. T. Tanaka, Y. Okhi, M. Ochi, M. Harada and T. Imai, "Enhanced partial discharge resistance of epoxy / clay nanocomposite prepared by newly developed organic modification and solubilisation methods", Vol. 15, pp. 81-89, 2008.
10. P. Maity, S. Kasisomayajula, V. Parameswaran, S. Basu and N. Gupta, "Improvement in surface degradation properties of polymer composites due to pre-processed nanometric alumina fillers", Vol. 15, pp. 63-72, 2008.
11. S. Patil, Testing of paints: Technical analysis of paints and paint raw materials, Colour Publications, Mumbai, 1998.
12. Z. Todorova, N. Dishovsky, R. Dimitrov, F. El-Tantawy, N. Abdel Aal, A. Hajry and M. Bouodina, "Natural rubber filled SiC and B4C ceramic composites as a new NTC thermistors and piezoresistive sensor materials", Polym. Comp., Vol. 29, pp. 109-118, 2008.
13. A.F.M. Barton, CRC Handbook of polymer-liquid interaction parameters and solubility parameters, CRC Press, Boca Raton, 1990.
14. M.A. Shenoy and D.J. D'Melo, "Evaluation of mechanical properties of unsaturated polyester guar gum / hydroxypropyl guar gum composites", Express Polym. Lett., Vol. 1, pp. 622-628, 2007.
15. S. Sen and N. Nugay, "Uncured and cured state properties of fly ash filled unsaturated polyester composites", J. Appl. Polym. Sci., Vol. 77, pp. 1128-1136, 2000
16. M.H. Vafayan and M. Poorabdollah, "Shrinkage control and kinetics behaviour of clay-unsaturated polyester nanocomposites", Iran. Polym. J., Vol. 15, pp. 841-849, 2006.
17. A.S. Sarvestani, "Modelling the solid like behaviour of entangled polymer nanocomposites at low frequency regimes", Eur. Polym. J., Vol. 44, pp. 263-269, 2008.
18. M.F. Ashby, P.J. Ferriera and D.L. Schodek, Nanomaterials, Nanotechnolgies and Design, Butterworth-Hienmann Publication, Burlington USA, pp.182, 2009.
19. T.S. Chow, "Effect of particle shape on mechanical properties of filled polymers", J. Mater. Sci., Vol. 15, pp. 1873-1888, 1980.
20. M.A. Shenoy and D.J. D'Melo, "Evaluation of mechanical properties of epoxy-guar gum composites", Polym. Eng. Sci., Vol. 48, pp. 124-132, 2008.
21. N. Mohamad, A. Muchtar, M.J. Ghazali, D.H. Mohd and C.H. Azhari, "Effect of epoxidized natural rubber-alumina nanoparticle composites", Eur. J. Sci. Res., Vol. 24, pp. 538-547, 2008.
22. B. Wetzel, F. Haupert, K. Friedrich, M.Q. Zhang and M.Z. Rong, "Impact and wear resistance of polymer nanocomposites at low filler loadings", Polym. Eng. Sci., Vol. 42, pp. 1919-1927, 2002.
23. G. Gong, W. Yang, M. Yang and J. Wu, "Effect of sperical nanoparticles on the motion of macromolecular chains and segments of isotactic polypropylene. I. dynamic mechanical and thermal properties", J. Macromol. Sci. B, Vol. 49, pp. 870-885, 2010.
24. P. Rittigstein and J.M. Torkelsen, "Polymer nanoparticle interfacial interactions in polymer nanocomposites: Confinement effects on glass transition temperature and suppression of physical ageing", J. Polym. Sci. Pol. Phys., Vol. 44, pp. 2935-2943, 2006.
25. M. Roy, J.K. Nelson, R.K. MacCrone, L.S. Schadler, C.W. Reed, R. Keefe, W. Zenger, "Polymer anocomposite dielectrics-role of the interface", IEEE Trans. Dielectr. Electr. Insul., Vol. 12, pp. 1273-1288, 2006.
26. M.A. Shenoy and D.J. D'Melo, 'Effects of crosslinking density on coating properties of a polyurea coating system". Surf Coat Tech, Vol. 89, pp. 221-230, 2006.
27. E.P. Chang and A. Takahashi, "Factors influencing impact strength of high impact polystyrene", Polym. Eng. Sci., Vol. 18, pp. 350-354, 1978.