Rheological properties of the polymer modified bitumen with emphasis on SBS polymer and its microstructure

Geotechnical Special Publication

Volumn , Issue 223 GSP, 2011, Pages 41-48

  Zorn, Sarah ^a   Mehta, Yusuf ^a   Dahm, Kevin ^a   Batten, Eileen ^a   Nolan, Aaron ^a   Dusseau, Ralph ^a  

^a Rowan University   (United States)

Author keywords

Asphalts; Microstructures; Polymer; Rheology

Indexed keywords

ASPHALTENE CONTENT; CRITICAL LEVEL; ELASTIC BEHAVIOR; ETHYLENE VINYL ACETATES; MALTENES; MONOMER UNITS; PLASTOMERS; POLYMER-MODIFIED BINDERS; POLYMER-MODIFIED BITUMEN; POLYPHOSPHORIC ACIDS; RHEOLOGICAL BEHAVIORS; RHEOLOGICAL PROPERTY; STYRENE AND BUTADIENES; STYRENE BUTADIENE RUBBER; STYRENE BUTADIENE STYRENES;

ASPHALT; ASPHALTENES; BUTADIENE; ELASTOMERS; HIGHWAY ENGINEERING; MECHANICAL PROPERTIES; MICROSTRUCTURE; PAVEMENTS; PHOSPHORIC ACID; PLASTICS; POLYBUTADIENES; POLYSTYRENES; RHEOLOGY; RUBBER; STYRENE;

POLYMERS;

EID: 84859946820     PISSN: 08950563     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1061/47634(413)6     Document Type: Conference Paper

References (22)

1. Brule, B., Brion, Y., And Tanguy, A. (1987). Paving Asphalt Polymer Blends: RelationshipsBetween Composition, Structure and Properties, Association of Asphalt PavingTechnologists, pp. 41-64.
2. Becker, Y., Méndez, M. P. and Rodríguez Y (2001). Polymer modified asphalt, VisionTechnologica, Vol. 9, N° 1.
3. Bahia, H. U., Hanson, D. . I., Zeng, M., Zhai, H., Khatri, M. A. and Anderson R. M (2001). Characterization of Modified Asphalt Binders in Superpave Mix Design, NCHRP Report459, TRB, Washington D. C, 2001
4. Gonzalez, O., Munoz, M. E., Santamara, A., Garcia-Morales, M., Navarro, F. J., and Partal, P. (2004). Rheology and Stability of Bitumen/EVA Blends, European Polymer Journal 40, pp. 2365-2372.
5. Airey, G. D. (2003). Rheological Properties of Styrene Butadiene Styrene Polymer ModifiedRoad Bitumens, Fuel 82, pp. 1709-1719.
6. Hrdlicka, G. M, Tandon, V., Prozzi, J., Smit, A., and Yildrim, Y. (2007). Evaluation of BinderTests for Identifying Rutting and Cracking Potential of Modified Asphalt Binders, Center forTransportation Infrastructure Systems, Research Report 0-4824-1.
7. Sengoz, B., Topal, A., Isikyakar, G., and Dokuz, E. (2009). Morphology and image analysis ofpolymer modified bitumens, Construction and Building Materials Vol. 23, pp. 1986-1992.
8. Aflaki, S., Tabatabaee, N. (2009). Proposals for Modification of Iranian Bitumen to Meet theClimatic Requirements of Iran, Construction and Building Materials, No. 23, pp. 2141-2150.
9. Cortizo, M. S., Larsen, D. O, Bianchetto, H., and Alessandrini, J. L. (2004). Effect of theThermal Degradation of SBS Copolymers during the Ageing of Modified Asphalts, J. ofPolymer Degradation and Stability, No. 86, pp. 275-282.
10. Mouillet, V., Lamontagne, J., Durrieu, F., Planche, J. P., and Lapalu, L. (2008). InfraredMicroscopy Investigation of Oxidation and Phase Evolution in Bitumen Modified WithPolymers, Fuel 87, pp. 1270-1280. (Pubitemid 351635585)
11. Haddadi, S., Ghorbel, E., and Laradi, N. (2008). Effects of the Manufacturing Process on thePerformances of the Bituminous Binders Modified with EVA. Construction and BuildingMaterials, No. 22, pp. 1212-1219. (Pubitemid 351444809)
12. Ruan, Y., Davison, R. R., and Glover, C. J. (2003). The Effect of Long-Term Oxidation on theRheological Properties of Polymer Modified Asphalts, Fuel 82, pp. 1763-1773.
13. Khodaii, A., and Mehrara, A., (2009). Evaluation of Permanent Deformation of Unmodifiedand SBS Modified Asphalt Mixtures Using Dynamic Creep Test, Construction and BuildingMaterials, No. 23, pp. 2586-2592.
14. Burak, S., and Isikyakar, G. (2008). Analysis of Styrene-Butadiene- Styrene Polymer ModifiedBitumen Using Fluorescent Microscopy and Conventional Test Methods, Journal ofHazardous Materials, No. 150, pp. 424-432.
15. Burak, S., and Isikyakar, G. (2008). Evaluation of the Properties and Microstructure of SBSand EVA Polymer Modified Bitumen Construction and Building Materials, No. 22, pp. 18971905.
16. Wen, G., Zhang, Y., Zhang, Y., Sun, K., and Fan, Y. (2002). Rheological Characterization ofStorage-Stable SBS-Modified Asphalts, Polymer Testing 21, pp. 295-302. (Pubitemid 34105441)
17. Fu H., Xie, L., Dou, D., Li, L., Yu, M., Yao, S. (2007). Storage Stability and Compatibility ofAsphalt Binder Modified by SBS Graft Copolymer. Construction and Building Materials, No. 21, pp. 1528-1533. (Pubitemid 46367588)
18. Zhang, F., Yu, J. (2009) The Research for High-Performance SBR Compound ModifiedAsphalt, Construction and Building Materials, Article in Press.
19. Yildirim, Y. (2007) Polymer Modified Asphalt Binders, Construction and Building Materials, No. 21, pp. 66-72.
20. Stastna, J., Zanzotto, L., and Vacin, O,. J. (2003), Viscosity Function in Polymer-ModifiedAsphalts. Journal of Colloid and Interface Science, pp. 200-207.
21. Kamiya, S., Tasaka, S., Zhang, X., Dong, D., and Inagaki, N. (2001). Compatibilizer Role ofStyrene-butadiene-styrene Triblock Copolymer in Asphalt, Polymer Journal, Vol. 33, No. 3, pp. 209-213. (Pubitemid 32445291)
22. Polacco, G., Stastna, J., Biondi, D., and Zanzotto, L. (2006). Relation between polymerarchitecture and nonlinear viscoelastic behavior of modified asphalt, J. Current Opinion inColloid and Interface Science 11, pp. 230-245. (Pubitemid 44738647)