Review of direct-drive radial flux wind turbine generator mechanical design

Wind Energy

Volumn 15, Issue 3, 2012, Pages 459-472

  Stander, Johan N ^a   Venter, Gerhard ^a   Kamper, Maarten J ^a  

^a STELLENBOSCH UNIVERSITY   (South Africa)

Author keywords

design; generator; mechanical structure; radial flux

Indexed keywords

CONVERSION EFFICIENCY; COST REDUCTION; DESIGN; IRON; MASS TRANSPORTATION; PERMANENT MAGNETS; STRUCTURAL DESIGN; TOPOLOGY; TURBOGENERATORS;

DESIGN CONSIDERATIONS; DIRECT DRIVE GENERATORS; DIRECT-DRIVE WIND TURBINES; ELECTRO MECHANICAL DESIGN; GENERATOR; MECHANICAL STRUCTURES; RADIAL FLUX; WIND TURBINE TECHNOLOGY;

WIND TURBINES;

COST-BENEFIT ANALYSIS; DESIGN; EFFICIENCY MEASUREMENT; ELECTRIC FIELD; EQUIPMENT COMPONENT; INSTALLATION; IRON; MAGNETIC FIELD; MECHANICS; STANDARDIZATION; WIND POWER; WIND TURBINE; YAM;

EID: 84859699749     PISSN: 10954244     EISSN: 10991824     Source Type: Journal    
DOI: 10.1002/we.484     Document Type: Review

References (67)

1. Bywaters G, John V, Lynch J, Mattila P, Norton G, Stowell J, Salata M, Labath O, Chertok A, Hablanian D,. Northern power systems WindPACT drive train alternative design study report. Technical Report No. NREL/SR-500-35524, National Renewable Energy Laboratory (NREL), Golden, CO, August 2004. DOI: 10.2172/15007774. [Online]. Available: http://www.nrel.gov/docs/fy05osti/35524. pdf (Accessed October 2010)
2. Shrestha G, Polinder H, Bang D, Ferreira JA,. Structural flexibility: a solution for weight reduction of large direct-drive wind-turbine generators. IEEE Transactions on Energy Conversion 2010; 25: 732-740. DOI: 10.1109/TEC.2010.2048713. [Online]. Available: (Accessed October 2010)
3. Fingersh L, Hand M, Laxson A,. Wind turbine design cost and scaling model. Technical Report No. NREL/TP-500-40566, National Renewable Energy Laboratory (NREL), Golden, CO, December 2006. DOI: 10.2172/897434. [Online]. Available: www.nrel.gov/wind/pdfs/40566.pdf (Accessed September 2010)
4. Stegmann JA, Kamper MJ,. Design aspects of medium power double rotor radial flux air-cored PM wind generators. Proceedings of IEEE Energy Conversion Congress and Exposition (ECCE), San Jose, CA, 2009; 3634-3640. DOI: 10.1109/ECCE.2009.5316257. [Online]. Available: http://ieeexplore.ieee.org.ez. sun.ac.za/stamp/stamp.jsp?tp=&arnumber=5316257 (Accessed October 2010)
5. McDonald AS, Mueller MA, Polinder H,. Structural mass in direct-drive permanent magnet electrical generators. IET Renewable Power Generation 2008; 2: 3-15. DOI: 10.1049/iet-rpg:20070071. [Online]. Available: (Accessed October 2010) (Pubitemid 351333172)
6. Klinger F,. Direct drive - the future in wind turbine design (Direktantriebe-Die zukunft der Windkraft). Technik-Symposium Presentation, Windenergie Forschungsgruppe, March 2010. [Online]. Available: http://www.wind-energy-research.de/Publikationen/Vortraege (Accessed November 2010)
7. Versteegh JCA,. Design of the Zephyros Z72 wind turbine with emphasis on the direct drive PM generator. Presentation at the IEEE Nordic Workshop on Power and Industrial Electronics (NORPIE), Trondheim, Norway, 2004; 1-7. [Online]. Available: http://www.elkraft.ntnu.no/norpie/info.html (Accessed September 2010)
8. 2. Proceedings of the 9th German Wind Energy Conference (Deutsche Wind Energie Konference - DEWEK), Bremen, Germany, 2008; 1-4. [Online]. Available: http://www.wind-energy-research.de/ Publikationen/Vortraege (Accessed October 2010)
9. Engström S, Hernnäs B, Parkegren C, Waernulf S,. Development of NewGen a new type of direct-drive generator. Proceedings of European Wind Energy Conference and Exhibition, London, UK, 2004; 1-10. [Online]. Available: http://www.2004ewec.info/files/23-1400-staffanengstrom-01.pdf (Accessed October 2010)
10. Handler D,. Investigation on gearless wind turbine generator structures - calculation and optimisation of the 3-bearing-variants (Untersuchung der Tragstruktur getriebeloser Windkraft-Generatoren-Berechnung und Optimierung einer 3-Lager-Variante). Diploma Report No.551, Institut für Elektrische Energiewandlung, Technische Universität, Darmstadt, Germany, 1997.
11. Anonymous. World's largest wind turbine: generates new large-shaft bearing technology. Power Transmission Engineering Magazine, Goldstein M, Stott RW, McGuinn J, (eds). Randall Publishing Inc.: Illinios, 2007; 32-35. [Online]. Available: (Accessed October 2010)
12. Anonymous. Nautilus bearing arrangement solution from SKF compact design reduces weight, energy loss and maintenance to improve wind turbine reliability. SKF Group Publishing, September 2009. [Online]. Available: www.skf.com/ medialibrary/asset/0901d19680059b (Accessed October 2010)
13. Turi MB, Marks CS,. Bearing selection techniques as applied to main-shaft direct and hybrid drives for wind turbines. The Timken Company Publishing, September 2010. [Online]. Available: http://www.timken.com/en-us/about/NewsRoom/ MediaKits/Pages/MediaKits.aspx (Accessed October 2010)
14. Anonymous. Wind energy solutions. The Timken Company Publishing, 2009. [Online]. Available: http://www.timken.com/en-us/solutions/windenergy/Pages/ home.aspx (Accessed October 2010)
15. Yagi S, Ninoyu N,. Technical trends in wind turbine bearings. Technical Report Review No. 76, NTN Corporation, Osaka, Japan, 2008. [Online]. Available: http://www.ntn.jp/english/products/review/pdf/NTN-TR76-en-p113-120.pdf (Accessed October 2010)
16. Turi MB, Marks CS,. Drive-train optimisation removing the guesswork from rotor bearing lifespans. Renewable Energy World Magazine, Appleyard D, Beattie D, Evans P, (eds), Special Supplement: Wind Technology Magazine. PennWell International Publishers: Essex, 2010; 12-18. [Online]. Available: (Accessed October 2010)
17. Terrell EJ, Needelman WM, Kyle JP,. Tribological challenges to the system. Wind Systems Magazine., Willcutt R, (ed.). Media Solutions Incorporated, 2010; 25-30. [Online]. Available: (Accessed October 2010)
18. Schweitzer G,. Application and research topics for active magnetic bearings. Symposium on Emerging Trends in Rotor Dynamics, International Union of Theoretical and Applied Mechanics (IUTAM), Indian Institute of Technology, 2009; 1-11. [Online]. Available: http://www.mcgs.ch/web-content/Delhi-IUTAM- Symp.pdf (Accessed October 2010)
19. Wassermann J, Schulz A, Schneeberger M,. Active magnetic bearings of high reliability. Proceedings of IEEE International Conference on Industrial Technology (ICIT), 2003; 194-197. DOI: 10.1109/ICIT.2003.1290267. Available: http://ieeexplore.ieee.org/xpl/freeabs-all.jsp?arnumber=1290267 (Accessed October 2010). (Pubitemid 40761435)
20. Chiba A, Fukao T, Ichikawa O, Oshima M, Takemoto M, Dorrell DG,. Magnetic bearings and bearingless drives (1st edn), Newnes: London, UK, 2005.
21. Post RF, Ruytov DD,. Ambient-temperature passive magnetic bearings: theory and design equations. Proceedings of the Sixth International Symposium on Magnetic Bearings. Technomic Publisher Company: Lancaster, PA, 1997; 1-13. [Online]. Available http://www.osti.gov/bridge/product.biblio.jsp?osti-id= 302210, online [October].
22. Schweitzer G, Maslen EH, (eds). Magnetic bearings theory, design and application to rotating machinery (1st edn). Spinger Verlag: Berlin, Germany, 2009. DOI: 10.1007/978-3-642-00497-115. [Online]. Available: (Accessed October 2010)
23. Shrestha G, Polinder H, Bang DJ, Ferreira JA,. Direct drive wind turbine generator with magnetic bearing. Proceedings of European Wind Energy Association (EWEA) Offshore Wind Conference and Exhibition, 2007.
24. Bang D, Polinder H, Ferreira JA, Hong S,. Structural mass minimisation of large direct-drive wind generators using a buoyant rotor structure. Proceedings of the IEEE Energy Conversion Congress and Exposition (ECCE), Alanta, GA, 2010; 3561-3568. DOI: 10.1109/ECCE.2010.5617705. [Online]. Available: http://ieeexplore.ieee.org/xpl/freeabs-all.jsp?arnumber=5617705 (Accessed October 2010)
25. Bang D, Polinder H, Shrestha G, Ferreira JA,. Possible solutions to overcome drawbacks of direct-drive generator for large wind turbines. Proceedings of European Wind Energy Conference and Exhibition, Marseille, France, 2009. [Online]. Available: http://www.ewec2009proceedings.info/ proceedings/index.php (Accessed October 2010)
26. Fielder WS,. Buoyant rotor. United States Patent, Patent No. US007348686B2, March 2008. [Online]. Available: http://www.freepatentsonline. com/7348686.html (Accessed October 2010)
27. Engström S, Lindgren S,. Design of NewGen direct-drive generator for demonstration in a 3.5 MW wind turbine. Proceedings of European Wind Energy Conference and Exhibition, Milan, Italy, 2007; 1-10. [Online]. Available: http://www.ewec2007proceedings.info/index.php (Accessed October 2010)
28. Hernnäs B, Parkegren C, Waernulf S,. Direct-drive pilot generator (Direktdriven pilotgenerator). Technical Report No. 02-2181:14, VG Power AB, Västerás, Sweden, 2002. [Online]. Available http://www.vgpower.com
29. Hasnaoui OB, Belhadj J, Elleuch M,. Direct drive permanent magnet synchronous generator investigation. Journal of Electrical Systems 2008; 4: 1-13. [Online]. Available: (Accessed October 2010)
30. Tarimer I, Ocak C,. Performance comparison of internal and external rotor structured wind generators mounted from same permanent magnets on same geometry. Electronics and Electrical Engineering 2009; 92: 65-70. [Online]. Available: (Accessed October 2010)
31. Colotti A, Ceol S,. High efficiency PM motor with outer rotor construction: a valid alternative to conventional motor design. Press Release, SERVAX Drives Company. [Online]. Available: http://www.servax.com/news/ (Accessed October 2010)
32. Grauers A,. Design of direct-driven permanent magnet generators for wind turbines. PhD Thesis, School of Electrical and Computing Engineering, Chalmers University of Technology, Göteborg, Sweden. October 1996.
33. Lampola P,. Directly driven, low-speed permanent-magnet generators for wind power applications, In Acta Polytechnica Scandinavica (Electrical Engineering Series No. 101). Finnish Academies of Techology: Espoo, Finland, 2000.
34. Schneider H, Boldlehner H, Hartkopf T, Hagenkort B, Henschel M, Jöckel S,. Development of an extremely compact 1.5 MW direct drive permanent magnet generator system using finite elements, Proceeding of the European Wind Energy Conference and Exhibition, Copenhagen, Denmark. DOI: 10.1016/S0167-6105(01)00222-7. [Online]. Available: http://www.ewea.org/index. php?id=819 (Accessed September 2010)
35. Pyrhonen J, Jokinen T, Hrabovcova V,. Design of Rotating Electrical Machines. John Wiley and Sons: Hoboken, NJ, 2008.
36. Boldea I,. Synchronous Generators (1st edn). The Electric Generators Handbook. CRC Press, Taylor and Francis Group: Florida, 2006.
37. Jassal A, Polinder H, Lahaye D, Ferreira JA,. Comparison of analytical and finite element calculation of eddy-current losses in PM machines. XIX International Conference on Electrical Machines (ICEM), Rome, Italy, 2010; 1-7. DOI: 10.1109/ICELMACH.2010.5607907. [Online]. Available: http://ieeexplore.ieee. org/xpl/freeabs-all.jsp?arnumber=5607907 (Accessed October 2010)
38. Polinder H, Hoeijmakers MJ, Scuotto M,. Eddy-current losses in the solid back-iron of PM machines for different concentrated fractional pitch windings. Proceedings of the International Electric Machines and Drives Conference (IEMDC), Antalya, Greece, 2007; 652-657. DOI: 10.1109/IEMDC.2007.382744. [Online]. Available: http://ieeexplore.ieee.org/xpl/freeabs-all.jsp?arnumber= 4270717 (Accessed October 2010) (Pubitemid 47553948)
39. Dubois MRJ,. Optimised permanent magnet generator topologies for direct drive wind turbines. PhD Thesis, Technical University Delft, Delft, The Netherlands. 2004.
40. Grauers A, Kasinathan P,. Force density limits in low-speed pm machines due to temperature and reactance. IEEE Transactions on Energy Conversion 2004; 19: 518-525. DOI: 10.1109/TEC.2004.832059. [Online]. Available: (Accessed October 2010)
41. Kasinathan P, Grauers A, Hamdi ES,. Force density limits in low-speed permanent-magnet machines due to saturation. IEEE Transactions on Energy Conversion 2005; 20: 37-44. DOI: 10.1109/TEC.2004.837302. [Online]. Available: (Accessed October 2010) (Pubitemid 40377521)
42. Jöckel S,. Calculation of different generator systems for wind turbines with particular reference to low-speed permanent-magnet machines. PhD Dissertation, Elektrotechnik und Informationtechnik, Technischen Universität Darmstadt, Darmstadt, Germany, May 2003.
43. Heier S,. Grid Integration of Wind Energy Conversion Systems (2nd edn). John Wiley and Sons: Sussex, 2006. URL (Accessed October 2010)
44. Spooner E, Williamson A,. Modular, permanent-magnet wind-turbine generators. Conference Record of the 1996 IEEE Industry Applications Conference, 31st IAS Annual Meeting, San Diego, CA, 1996; 497-502. DOI: 10.1109/IAS.1996.557073. [Online]. Available: http://ieeexplore.ieee.org/xpl/ freeabs-all.jsp?arnumber=557073 (Accessed October 2010)
45. Spooner E, Williamson AC, Catto G,. Modular design of permanent-magnet generators for wind turbines. IEEE Proceedings, Electric Power Applications 2002; 143: 388-395, DOI: 10.1049/ip-epa:19960434. [Online]. Available: (Accessed October 2010)
46. Williamson AC, Spooner E, Thompson L,. Large modular PM generators. IEE Colloquium on New Topologies for Permanent Magnet Machines (Digest No: 1997/090), London, UK, 1997; 4/1-4/6. DOI: 10.1049/ic:19970521. [Online]. Available: http://ieeexplore.ieee.org/xpl/freeabs-all.jsp?arnumber=643629 (Accessed October 2010)
47. Wills DA, Kamper MJ,. Analytical prediction of rotor eddy current loss due to stator slotting in PM machines. Proceedings of the Energy Conversion Congress and Exposition (ECCE), Atlanta, GA, 2010; 992-995. DOI: 10.1109/ECCE.2010.5617876. [Online]. Available: http://ieeexplore.ieee.org/xpl/ freeabs-all.jsp?arnumber=5617876 (Accessed November 2010)
48. Yamagishi W, Hashimoto K, Sato T, Ogawa S, Henmi Z,. Magnetic properties of Fe-Co alloys produced by powder metallurgy. IEEE Transactions on Magnetics 1986; 22: 641-643, DOI: 10.1109/TMAG.1986. [Online]. Available: (Accessed October 2010)
49. Jack AG, Mgrain orientatedecrow BC, Dickinson PG, Stephenson D, Burdess JS, Fawcett JN, Evans T,. Permanent magnet machines with powdered iron cores and pre-pressed windings. Conference Record of the 1999 IEEE Industry Applications Conference, 34th IAS Annual Meeting, Phoenix, AZ, 1999; 97-103. DOI: 10.1109/IAS.1999.799934. [Online]. Available: http://ieeexplore.ieee.org.ez.sun. ac.za/stamp/stamp.jsp?tp=&arnumber=799934 (Accessed August 2010) (Pubitemid 30544169)
50. McDonald AS,. Structural analysis of low speed, high torque electrical generators for direct drive renewable energy converters. PhD Dissertation, School of Engineering and Electronics, University of Edinburgh, Edinburgh, UK, December 2008.
51. Gordon P,. Aspects of, and new approaches to, the design of direct drive generators for wind turbines. PhD Dissertation, New and Renewable Energy Group, School of Engineering, University of Durham, Durham, UK, 2004.
52. Chin YK, Kanninen P, Maki-Ontto P, Sakki R, Lendenmann H,. Phenomenon of magnetic force in permanent magnet wind turbine generators. Proceedings of International Conference on Electrical Machines and Systems (ICEMS), Tokyo, Japan, 2009; 1-6. DOI: 10.1109/ICEMS.2009.5382708. Available: http://ieeexplore.ieee.org/xpl/freeabs-all.jsp?arnumber=5382708 (Accessed October 2010)
53. Hartkopf T, Hofmann M, Jöckel S,. Direct-drive generators for megawatt wind turbines. Proceedings of the European Wind Energy Conference and Exhibition, Dublin, Ireland, 1997; 668-671. [Online]. Available: Direct-drivegeneratorsformegawattwindturbines (Accessed October 2010)
54. Mueller MA, McDonald AS,. A lightweight low-speed permanent magnet electrical generator for direct-drive wind turbines. Wind Energy 2009; 12: 768780, DOI: 10.1002/we.333. [Online]. Available: (Accessed October 2010)
55. Zavvos A, McDonald AS, Mueller M,. Electromagnetic and mechanical optimisation of direct-drive generators for large wind turbines. Proceedings of the 5th IET International Conference on Power Electronics, Machines and Drives (PEMD 2010), Brighton, UK, 2010; 1-6. DOI: 10.1049/cp.2010.0066. [Online]. Available: http://ieeexplore.ieee.org/xpl/freeabs-all.jsp?arnumber=5523825 (Accessed October 2010)
56. Poore R, Lettenmaier T,. Alternative design study report: WindPACT advanced wind turbine drive train designs study. Research Report, NREL/SR-500-33196, NREL, Golden, CO, August 2003. DOI: 10.2172/15004456. [Online]. Available: http://www.nrel.gov/docs/fy03osti/33196.pdf (Accessed October 2010)
57. Lewis C, Müller J,. A direct drive wind turbine HTS generator. IEEE Power Engineering Society General Meeting, Tampa, FL, June 2007; 1-8. DOI: 10.1109/PES.2007.386069. [Online]. Available: http://ieeexplore.ieee.org.ez.sun. ac.za/xpls/abs-all.jsp?arnumber=4275835 (Accessed October 2010)
58. Stone GC, Boulter EA, Culbert I, Dhirani H,. Electrical Insulation for Rotating Machines - Design, E valuation, Aging, Testing and Repair, IEEE Press Series on Power Engineering. John Wiley and Sons: Hobooken, NJ, 2004. DOI: 10.1002/047168290X.
59. Bruetsch R,. Insulating systems for wind turbine generators. INDUCTICA Technical Conference on Coil Winding, Insulation and Electrical Manufacturing Exhibition (CWIEME), Breitenbach, Switzerland, 2004; 1-5. [Online]. Available: http://www.vonroll.com/downloads/ISWTG.pdf (Accessed October 2010)
60. El-Refaie AM,. Fractional-slot concentrated-windings synchronous permanent magnet machines: opportunities and challenges. IEEE Transactions on Industrial Electronics 2010; 57: 107-121.
61. Huang WY, Bettayeb A, Kaczmarek R, Vannier JC,. Optimization of magnet segmentation for reduction of eddy-current losses in permanent magnet synchronous machine. IEEE Transactions on Energy Conversion 2010; 25: 381-387. DOI: 10.1109/TEC.2009.2036250. [Online]. Available: (Accessed October 2010)
62. Sergeant P, Van den Bossche A,. Segmentation of magnets to reduce losses in permanent-magnet synchronous machines. IEEE Transactions on Magnetics 2008; 44: 4409-4412, DOI: 10.1109/TMAG.2008.2001347. [Online]. Available: (Accessed October 2010)
63. Campbell P,. Permanent Magnet Materials and Their Application. Cambridge University Press: Cambridge, 1996.
64. Anonymous. Design guide. Total Magnetic Solutions online-library. [Online]. Available: http://www.magnetsales.com/Design/DesignG.htm (Accessed October 2010)
65. Rahman MA,. Advances of interior permanent magnet IPM wind generators. Proceedings of International Conference on Electrical Machines and Systems (ICEMS), 2008; 2228-2233. [Online]. Available: http://ieeexplore.ieee.org/xpl/ freeabs-all.jsp?arnumber=4771119 (Accessed October 2010)
66. Hsieh MF, Hsu YC, Dorrell DG,. Design of large-power surface-mounted permanent-magnet motors using postassembly magnetization. IEEE Transactions on Industrial Electronics 2010; 57: 3376-3384.
67. Anonymous. Fastening and securing magnets. Magnetic Component Engineering (MCE) Company, 2009. [Online]. Available: http://www.mceproducts.com/knowledge- base/article/article-dtl.asp?id=22 (Accessed October 2010)