Design of large-power surface-mounted permanent-magnet motors using postassembly magnetization

IEEE Transactions on Industrial Electronics

Volumn 57, Issue 10, 2010, Pages 3376-3384

  Hsieh, Min Fu ^a   Hsu, You Chiuan ^a   Dorrell, David G ^b  

^a NATIONAL CHENG KUNG UNIVERSITY   (Taiwan)

^b UNIVERSITY OF TECHNOLOGY SYDNEY   (Australia)

Author keywords

Magnetization; motor design; permanent magnet (PM) motor; postassembly magnetization; surface mounted PM (SPM)

Indexed keywords

DESIGN CONSIDERATIONS; DESIGN PROCESS; DESIGN REQUIREMENTS; FILL FACTOR; FINITE ELEMENT ANALYSIS; HIGH INTENSITY; MANUFACTURING PROCESS; MOTOR DESIGN; PERMANENT MAGNET MOTOR; PM MOTOR; POST-ASSEMBLY MAGNETIZATION; RARE EARTH MAGNET; SPM MOTORS; STATOR WINDING; WIRE DIAMETER;

DESIGN; FINITE ELEMENT METHOD; MANUFACTURE; PERMANENT MAGNETS;

MAGNETIZATION;

EID: 77956594239     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2038952     Document Type: Article

References (26)

1. C. K. Lee and B. I. Kwon, "Design of post-assembly magnetization system of line start permanent-magnet motors using FEM," IEEE Trans. Magn., vol.41, no.5, pp. 1928-1931, May 2005.
2. G. W. Jewell and D. Howe, "Computer-aided design of magnetizing fixtures for the post-assembly magnetization of rare-earth permanent magnet brushless DC motors," IEEE Trans. Magn., vol.28, no.5, pp. 3036-3038, Sep. 1992.
3. A. B. Proca, A. Keyhani, A. El-Antably, W. Lu, and M. Dai, "Analytical model for permanent magnet motors with surface mounted magnets," IEEE Trans. Energy Convers., vol.18, no.3, pp. 386-391, Sep. 2003.
4. C. Gerada and K. J. Bradley, "Integrated PM machine design for an aircraft EMA," IEEE Trans. Ind. Electron., vol.55, no.9, pp. 3300-3306, Sep. 2008.
5. F. Marignetti, V. Delli Colli, and Y. Coia, "Design of axial flux PM synchronous machines through 3-D coupled electromagnetic thermal and fluid-dynamical finite-element analysis," IEEE Trans. Ind. Electron., vol.55, no.10, pp. 3591-3601, Oct. 2008.
6. M. Dai, A. Keyhani, and T. Sebastian, "Torque ripple analysis of a PM brushless DC motor using finite element method," IEEE Trans. Energy Convers., vol.19, no.1, pp. 40-45, Mar. 2004.
7. L. Parsa and L. Hao, "Interior permanent magnet motors with reduced torque pulsation," IEEE Trans. Ind. Electron., vol.55, no.2, pp. 602-609, Feb. 2008.
8. T. S. Low, S. Chen, and X. Gao, "Robust torque optimization for BLDC spindle motors," IEEE Trans. Ind. Electron., vol.48, no.3, pp. 656-663, Jun. 2001.
9. Z. Sun, J. Wang, D. Howe, and G. Jewell, "Analytical prediction of the short-circuit current in fault-tolerant permanent-magnet machines," IEEE Trans. Ind. Electron., vol.55, no.12, pp. 4210-4217, Dec. 2008.
10. M. S. K. Khan and M. A. Rahman, "Development and implementation of a novel fault diagnostic and protection technique for IPM motor drives," IEEE Trans. Ind. Electron., vol.56, no.1, pp. 85-92, Jan. 2009.
11. B. M. Ebrahimi, J. Faiz, and M. J. Roshtkhari, "Static-, dynamic-, and mixed-eccentricity fault diagnoses in permanent-magnet synchronous motors," IEEE Trans. Ind. Electron., vol.56, no.11, pp. 4727-4739, Nov. 2009.
12. M. Nemec, K. Drobnic, D. Nedeljkovic, and V. Ambrozic, "Direct current control of a synchronous machine in field coordinates," IEEE Trans. Ind. Electron., vol.56, no.10, pp. 4052-4061, Oct. 2009.
13. D. A. Staton and A. Cavagnino, "Convection heat transfer and flow calculations suitable for electric machines thermal models," IEEE Trans. Ind. Electron., vol.55, no.10, pp. 3509-3516, Oct. 2008.
14. D. G. Dorrell, "Combined thermal and electromagnetic analysis of permanent-magnet and induction machines to aid calculation," IEEE Trans. Ind. Electron., vol.55, no.10, pp. 3566-3574, Oct. 2008.
15. A. Boglietti, A. Cavagnino, D. Staton, M. Shanel, M. Mueller, and C. Mejuto, "Evolution and modern approaches for thermal analysis of electrical machines," IEEE Trans. Ind. Electron., vol.56, no.3, pp. 871- 882, Mar. 2009.
16. W. F. Praeg, "A pulsed power supply for injection bump magnets," IEEE Trans. Ind. Electron. Control Instrum., vol.26, no.1, pp. 40-46, Feb. 1979.
17. Y. Okada, H. Inoue, H. Fusayasu, and H. Nishida, "Analysis for permanent magnet motor taking account of magnetizing process," IEEE Trans. Magn., vol.33, no.2, pp. 2113-2116, Mar. 1997.
18. Y. Zhilichev, P. Campbell, and D. Miller, "In situ magnetization of isotropic permanent magnets," IEEE Trans. Magn., vol.38, no.5, pp. 2988-2990, Sep. 2002.
19. P. Zheng, Y. Liu, Y. Wang, and S. Cheng, "Magnetization analysis of the brushless dc motor used for hybrid electric vehicle," IEEE Trans. Magn., vol.41, no.1, pp. 522-524, Jan. 2005. (Pubitemid 40136348)
20. L. Chang, T. R. Eastham, and G. E. Dawson, "In situ magnetization of NdFeB magnets for permanent magnet machines," IEEE Trans. Magn., vol.27, no.5, pp. 4355-4359, Sep. 1991.
21. S. K. Pal, "Comparative study of the design and manufacturing processes of electrical motors with low and high energy permanent magnets," in Proc. 6th IEE Int. Conf. Elect. Mach. Drives, Oxford, U.K., Sep. 8-10, 1993, pp. 339-346.
22. M. F. Hsieh, Y. C. Hsu, and D. G. Dorrell, "Design of large power surfacemounted permanent-magnet motors using post-assembly magnetization," in Proc. 33rd Annu. Conf. IEEE Ind. Electron. Soc., Taipei, Taiwan, Nov. 5-8, 2007, pp. 204-209.
23. Characteristic Curves of Magnetic Properties of Magnetic Steel Coils. Kaohsiung, Taiwan: China Steel Corp., 2004.
24. D. G. Dorrell, M. F. Hsieh, and Y. C. Hsu, "Post assembly magnetization patterns in rare earth permanent magnet motors," IEEE Trans. Magn., vol.43, no.6, pp. 2489-2491, Jun. 2007.
25. M. F. Hsieh and Y. C. Hsu, "Characteristics regulation for manufacture of permanent-magnet motors using post-assembly magnetization," IEEE Trans. Magn., vol.43, no.6, pp. 2510-2512, Jun. 2007.
26. D. Hanselman, Brushless Permanent Magnet Motor Design. Cranston, RI: The Writers' Collective, 2003, ch. 4.