Strengthening and Rehabilitation of Reinforced Concrete Slabs with Carbon-Fiber Reinforced Polymers Using a Refined Bond Model

Computer-Aided Civil and Infrastructure Engineering

Volumn 27, Issue 5, 2012, Pages 333-346

  Finckh, Wolfgang ^a   Zilch, Konrad ^a  

^a TECHNICAL UNIVERSITY OF MUNICH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESIVE-BONDED; BOND FORCE; BOND MODELS; BUILDING STRUCTURE; COMPOSITE ACTION; CONCRETE STRENGTH; CONTACT PRESSURES; EFFECTIVE DEPTH; END ANCHORAGE; EXTERNALLY BONDED; FULL SCALE TESTS; LIVE LOADS; LOAD-BEARING ELEMENTS; NEW PARAMETERS; REINFORCED POLYMERS; SHEAR FORCE; STRUCTURAL ELEMENTS;

COMPOSITE STRUCTURES; CONCRETE CONSTRUCTION; CONCRETE SLABS; LAMINATES;

FIBER REINFORCED PLASTICS;

ADHESION; BENDING; CONCRETE STRUCTURE; LOADING TEST; PARAMETERIZATION; POLYMER; REINFORCED CONCRETE; SHEAR STRENGTH; STRUCTURAL ADJUSTMENT;

EID: 84859639142     PISSN: 10939687     EISSN: 14678667     Source Type: Journal    
DOI: 10.1111/j.1467-8667.2011.00752.x     Document Type: Article

References (31)

1. Chen, J. & Teng, J. (2001), Anchorage strength models for FRP and steel plates bonded to concrete, Journal of Structural Engineering, 127(7), 784-91.
2. Cusson, D., Lounis, Z. & Daigle, L. (2011), Durability monitoring for improved service life predictions of concrete bridge decks in corrosive environments, Computer-Aided Civil and Infrastructure Engineering, 26(7), 524-41.
3. DAfStb. (2012), Guideline "Verstärken von Betonbauteilen mit geklebter Bewehrung" (Strengthening Reinforced Concrete Structures with Adhesive Bonded Reinforcement), Deutscher Ausschuss für Stahlbeton, Beuth, Berlin, Germany
4. Dai, J., Ueda, T. & Sato, Y. (2005), Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method, Journal of Composites for Construction, ASCE, 9(1), 52-62.
5. Dai, J., Ueda, T., Sato, Y. & Nagai, K. (2012), Modeling of tension stiffening behavior in FRP-strengthened RC members based on rigid body spring networks, Computer-Aided Civil and Infrastructure Engineering, 27. DOI:
6. DIBt. (2008), Z-36.12-70, Verstärkung von Stahlbetonbeilen durch mit dem Baukleber StoPox SK14 Schubfest Aufgeklebte Kohlefaserlamellen Sto S&P CFK Lamellen nach DIN 1045-1:2008-08, Deutsches Institut für Bautechnik, Berlin, Germany
7. DIBt. (2009), Z-36.12-73, Verstärken von Stahlbetonbauteilen durch in Schlitze verklebte Kohlefaserlamellen Carboplus nach DIN 1045-1:2008-08, Deutsches Institut für Bautechnik, Berlin, Germany
8. EN 199211-1. (2004), Eurocode 2: Design of Concrete Structures-Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization, Brussels, Belgium
9. fib. (2001), Externally Bonded FRP Reinforcement for RC Structures-Bulletin 14, International Federation for Structural Concrete, Lausanne, Switzerland
10. Finckh, W. & Zilch, K. (2010), Evaluation of the bond behavior at the intermediate crack element with a special test procedure, in Proceedings of the CICE 2010-The 5th International Conference on FRP Composites in Civil Engineering, Beijing, China, 517-20.
11. Finckh, W. & Zilch, K. (2011), Influence of the curvature on the bond force transfer of EBR, in Proceedings of the ACI SP-275: Fiber-Reinforced Polymer Reinforcement for Concrete. Structures 10th International Symposium (FRPRCS 10), Tampa, Florida, 22-1-22-20
12. Finckh, W. & Zilch, K. (2012), Influence of shear crack offsets on the bond behavior of EBR at the intermediate crack element, in Proceedings of the CICE 2012-The 6th International Conference on FRP Composites in Civil Engineering, Rome, Italy
13. Finckh, W., Zilch, K. & Ellinger, M. (2011), Evaluating the bond stress relationship of externally bonded CFRP-strips at the intermediate crack element, in Proceedings of SMAR 2011, the 1st Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, UAE, 113.
14. Holzenkämpfer, P. (1994), Ingenieurmodelle des verbunds geklebter bewehrung für betonbauteile. Ph.D. thesis, TU-Braunschweig, Braunschweig, Germany
15. Huang, R. Y., Mao, I. S. & Lee, H. K. (2010), Exploring the deterioration factors of bridges: a rough set theory approach, Computer-Aided Civil and Infrastructure Engineering, 25(7), 517-29.
16. Husemann, U. & Budelmann, H. (2009), Increase of the bond capacity of externally bonded CFRP-plates on RC-structures due to self-induced contact pressure, in Proceedings of the 9th International Symposium on Fibre Reinforced Polymers in Reinforced Concrete Structures (FRPRCS 9), Sydney, Australia, 150.
17. Jansze, W. (1997), Strengthening of reinforced concrete members in bending by externally bonded steel plates, design for beam shear and plate anchorage. Ph.D. thesis, Delft University of Technology, Delft, The Netherlands
18. Lu, X. Z., Teng, J. G., Ye, L. P. & Jiang, J. J. (2005), Bond-slip models for FRP sheets/plates bonded to concrete, Engineering Structures, 27(6), 920-37.
19. Niedermeier, R. (2001), Zugkraftdeckung bei klebearmierten Bauteilen. Ph.D. thesis, Technische Universität München, Munich, Germany
20. Noakowski, P. (1988), Nachweißverfahren für Verankerung, Verformung, Zwangsbeanspruchung und Rissbreite, DAfStb Heft 394, Beuth, Berlin, Germany
21. Oehlers, D. & Seracino, R. (2004), Design of FRP and steel-plated RC structures, Elsevier, Oxford, UK
22. Schilde, K. & Seim, W. (2007), Experimental and numerical investigations of bond between CFRP and concrete, Construction and Building Materials, 21(4), 709-26.
23. Thorenfeldt, E. (2002), Anchor capacity of tension loaded CFRP plates bonded to concrete, in Proceedings of Bond in Concrete 2002-From Research to Standards, Budapest, Hungary, 638-47.
24. Ulaga, T. (2003), Betonbauteile mit stab- und lamellenbewehrung: verbund- und zuggliedmodellierung. Ph.D. thesis, ETH Zürich, Zurich, Switzerland
25. Wu, Y. F., Wang, Z. Y., Liu, K., He, W. & Wang, Z. (2009), Numerical analyses of hybrid-bonded FRP-strengthened concrete beams, Computer-Aided Civil & Infrastructure Engineering, 24(5), 371-84.
26. Zehetmaier, G. (2006), Zusammenwirken einbetonierter Bewehrung mit Klebearmierung bei verstrkten Betonbauteilen. Ph.D. thesis, Technische Universität München, Munich, Germany
27. Zehetmaier, G. & Zilch, K. (2003), Interaction between internal bars and externally FRP reinforcement in RC members, in Proceedings of the Sixth International Symposium on FRP Reinforcement for Concrete Structures (FRPRCS-6), Singapore, 397-406.
28. Zilch, K., Niedermeier, R. & Finckh, W. (2009), Guideline for the performance and interpretation of bond tests on concrete specimens with externally bonded CFRP strips, in Proceedings of the 9th International Symposium on Fibre Reinforced Polymers in Reinforced Concrete Structures (FRPRCS 9), Sydney, Australia, 149.
29. Zilch, K., Niedermeier, R. & Finckh, W. (2011), Sachstandbericht Verstärken von Betonbauteilen, DAfStb Heft 591, Beuth, Berlin, Germany
30. Zilch, K., Niedermeier, R. & Finckh, W. (2012), Praxisgerechte Bemessungsansätze für das Wirtschaftliche Verstärken von Betonbauteilen mit Geklebter Bewehrung-Verbundtragfähigkeit Unter Statischer Belastung, DAfStb Heft 592, Beuth, Berlin, Germany
31. Zilch, K. & Zehetmaier, G. (2010), Bemessung im Konstruktiven Betonbau, 2nd edn. Springer, Berlin, Germany