메뉴 건너뛰기




Volumn 60, Issue 1-4, 2012, Pages 135-147

Optimization of wire electrical discharge machining process parameters for cutting tungsten

Author keywords

Neural network; Optimization; Pure tungsten; Response surface methodology; Simulated annealing algorithm; Wire electrical discharge machining

Indexed keywords

BACK-PROPAGATION NEURAL NETWORKS; EFFECTIVE TOOL; FIELD EMISSION SCANNING ELECTRON MICROSCOPES; HYBRID METHOD; METAL REMOVAL RATE; OPTIMAL PARAMETER SETTINGS; OPTIMAL SETTING; OPTIMIZATION OF PARAMETERS; ORTHOGONAL TABLE; PROCESSING PARAMETERS; PURE TUNGSTEN; QUALITY PERFORMANCE; RESPONSE SURFACE METHODOLOGY; SIMULATED ANNEALING ALGORITHM; SIMULATED ANNEALING ALGORITHMS; TAGUCHI; WIRE ELECTRICAL DISCHARGE MACHINING;

EID: 84859527009     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-011-3576-z     Document Type: Article
Times cited : (94)

References (31)
  • 1
    • 44749094526 scopus 로고    scopus 로고
    • Modeling and optimization of wire electrical discharge machining of γ-TiAl in trim cutting operation
    • 10.1016/j.jmatprotec.2007.11.194
    • S Sarkar M Sekh S Mitra B Bhattacharyya 2008 Modeling and optimization of wire electrical discharge machining of γ-TiAl in trim cutting operation J Mater Process Technol 205 1-3 376 387 10.1016/j.jmatprotec.2007.11.194
    • (2008) J Mater Process Technol , vol.205 , Issue.13 , pp. 376-387
    • Sarkar, S.1    Sekh, M.2    Mitra, S.3    Bhattacharyya, B.4
  • 2
    • 37049023003 scopus 로고    scopus 로고
    • Experimental investigation of wire electrical discharge machining of gallium-doped germanium
    • DOI 10.1016/j.jmatprotec.2007.06.038, PII S0924013607006371
    • E Bamberg D Rakwal 2008 Experimental investigation of wire electrical discharge machining of gallium-doped germanium J Mater Process Technol 197 1-3 419 427 10.1016/j.jmatprotec.2007.06.038 (Pubitemid 350251169)
    • (2008) Journal of Materials Processing Technology , vol.197 , Issue.1-3 , pp. 419-427
    • Bamberg, E.1    Rakwal, D.2
  • 3
    • 64249107591 scopus 로고    scopus 로고
    • Slicing, cleaning and kerf analysis of germanium wafers machined by wire electrical discharge machining
    • D Rakwal E Bamberg 2009 Slicing, cleaning and kerf analysis of germanium wafers machined by wire electrical discharge machining Mater Manuf Process 209 8 3740 3751
    • (2009) Mater Manuf Process , vol.209 , Issue.8 , pp. 3740-3751
    • Rakwal, D.1    Bamberg, E.2
  • 4
    • 78650284154 scopus 로고    scopus 로고
    • Review of research work in sinking EDM and WEDM on metal matrix composite materials
    • 10.1007/s00170-010-2534-5
    • RK Garg KK Singh A Sachdeva VS Sharma K Ojha S Singh 2010 Review of research work in sinking EDM and WEDM on metal matrix composite materials Int J Adv Manuf Technol 50 5-8 611 624 10.1007/s00170-010-2534-5
    • (2010) Int J Adv Manuf Technol , vol.50 , Issue.58 , pp. 611-624
    • Garg, R.K.1    Singh, K.K.2    Sachdeva, A.3    Sharma, V.S.4    Ojha, K.5    Singh, S.6
  • 5
    • 34748901226 scopus 로고    scopus 로고
    • Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method
    • DOI 10.1007/s00170-006-0672-6
    • SS Mahapatra A Patnaik 2007 Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method Int J Adv Manuf Technol 34 9-10 911 925 10.1007/s00170-006-0672-6 (Pubitemid 47482169)
    • (2007) International Journal of Advanced Manufacturing Technology , vol.34 , Issue.9-10 , pp. 911-925
    • Mahapatra, S.S.1    Patnaik, A.2
  • 6
    • 67749139792 scopus 로고    scopus 로고
    • Empirical modeling and optimization of wire electrical discharge machining
    • 10.1007/s00170-008-1769-x
    • DVSSSV Prasad A Gopala Krishna 2009 Empirical modeling and optimization of wire electrical discharge machining Int J Adv Manuf Technol 43 9-10 914 925 10.1007/s00170-008-1769-x
    • (2009) Int J Adv Manuf Technol , vol.43 , Issue.910 , pp. 914-925
    • Dvsssv, P.1    Gopala Krishna, A.2
  • 7
    • 70350452402 scopus 로고    scopus 로고
    • Modelling and optimization of process parameters of wire electrical discharge machining
    • 10.1243/09544054JEM1559
    • RV Rao PJ Pawar 2009 Modelling and optimization of process parameters of wire electrical discharge machining Proc IME B J Eng Manuf 223 11 1431 1440 10.1243/09544054JEM1559
    • (2009) Proc IME B J Eng Manuf , vol.223 , Issue.11 , pp. 1431-1440
    • Rao, R.V.1    Pawar, P.J.2
  • 8
    • 77953622067 scopus 로고    scopus 로고
    • A study on the performance of some multi-response optimisation methods for WEDM processes
    • 10.1007/s00170-009-2391-2
    • SK Gauri S Chakraborty 2010 A study on the performance of some multi-response optimisation methods for WEDM processes Int J Adv Manuf Technol 49 1-4 155 166 10.1007/s00170-009-2391-2
    • (2010) Int J Adv Manuf Technol , vol.49 , Issue.14 , pp. 155-166
    • Gauri, S.K.1    Chakraborty, S.2
  • 9
    • 33750619597 scopus 로고    scopus 로고
    • On the influence of cutting speed limitation on the accuracy of wire-EDM corner-cutting
    • DOI 10.1016/j.jmatprotec.2006.09.030, PII S0924013606008417
    • JA Sanchez JL Rodil A Herrero LNL Lacalle A Lamikiz 2007 On the influence of cutting speed limitation on the accuracy of wire-EDM corner-cutting J Mater Process Technol 182 1-3 574 579 10.1016/j.jmatprotec.2006.09.030 (Pubitemid 44693340)
    • (2007) Journal of Materials Processing Technology , vol.182 , Issue.1-3 , pp. 574-579
    • Sanchez, J.A.1    Rodil, J.L.2    Herrero, A.3    De Lacalle, L.N.L.4    Lamikiz, A.5
  • 10
    • 34547700527 scopus 로고    scopus 로고
    • Corner error simulation of rough cutting in wire EDM
    • DOI 10.1016/j.precisioneng.2007.01.005, PII S0141635907000451
    • F Han J Zhang I Soichiro 2007 Corner error simulation of rough cutting in wire EDM Preci Eng 31 4 331 336 10.1016/j.precisioneng.2007.01.005 (Pubitemid 47212391)
    • (2007) Precision Engineering , vol.31 , Issue.4 , pp. 331-336
    • Han, F.1    Zhang, J.2    Soichiro, I.3
  • 11
    • 63049109859 scopus 로고    scopus 로고
    • Using wire electrical discharge machining for improved corner cutting accuracy of thin parts
    • 10.1007/s00170-008-1531-4
    • O Dodun AM Gonçalves-Coelho L Slǎtineanu G Nagîţ 2009 Using wire electrical discharge machining for improved corner cutting accuracy of thin parts Int J Adv Manuf Technol 41 9-10 858 864 10.1007/s00170-008-1531-4
    • (2009) Int J Adv Manuf Technol , vol.41 , Issue.910 , pp. 858-864
    • Dodun, O.1    Gonçalves-Coelho, A.M.2    Slǎtineanu, L.3    Nagîţ, G.4
  • 12
    • 33744506527 scopus 로고    scopus 로고
    • Experimental analysis and optimization of a photo resist coating process for photolithography in wafer fabrication
    • DOI 10.1016/j.mejo.2005.10.006, PII S0026269205003733
    • YK Yang TC Chang 2006 Experimental analysis and optimization of a photo resist coating process for photolithography in wafer fabrication Microelectronics J 37 8 746 751 2203156 10.1016/j.mejo.2005.10.006 (Pubitemid 43817999)
    • (2006) Microelectronics Journal , vol.37 , Issue.8 , pp. 746-751
    • Yang, Y.-K.1    Chang, T.-C.2
  • 13
    • 43149125407 scopus 로고    scopus 로고
    • A study of Taguchi and design of experiments method in injection molding process for polypropylene components
    • DOI 10.1177/0731684407084988
    • YK Yang JR Shie HT Liao JL Wen RT Yang 2008 A study of Taguchi and design of experiments method in injection molding process for polypropylene components J Reinf Plast Comp 27 8 819 834 10.1177/0731684407084988 (Pubitemid 351641385)
    • (2008) Journal of Reinforced Plastics and Composites , vol.27 , Issue.8 , pp. 819-834
    • Yang, Y.-K.1    Shie, J.-R.2    Liao, H.-T.3    Wen, J.-L.4    Yang, R.-T.5
  • 14
    • 59749088454 scopus 로고    scopus 로고
    • Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes
    • 10.1007/s00170-007-1368-2
    • M Kurt E Bagci Y Kaynak 2009 Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes Int J Adv Manuf Technol 40 5-6 458 469 10.1007/s00170-007-1368-2
    • (2009) Int J Adv Manuf Technol , vol.40 , Issue.56 , pp. 458-469
    • Kurt, M.1    Bagci, E.2    Kaynak, Y.3
  • 15
    • 79951957046 scopus 로고    scopus 로고
    • Parameter optimization of laser transformation hardening by using Taguchi method and utility concept
    • 10.1007/s00170-010-2787-z
    • DS Badkar KS Pandey G Buvanashekaran 2011 Parameter optimization of laser transformation hardening by using Taguchi method and utility concept Int J Adv Manuf Technol 52 9-12 1067 1077 10.1007/s00170-010-2787-z
    • (2011) Int J Adv Manuf Technol , vol.52 , Issue.912 , pp. 1067-1077
    • Badkar, D.S.1    Pandey, K.S.2    Buvanashekaran, G.3
  • 16
    • 79958824027 scopus 로고    scopus 로고
    • Optimization of green sand casting process parameters of a foundry by using Taguchi's method
    • 10.1007/s00170-010-3029-0
    • K Sushil PS Satsangi DR Prajapati 2010 Optimization of green sand casting process parameters of a foundry by using Taguchi's method Int J Adv Manuf Technol 55 23 34 10.1007/s00170-010-3029-0
    • (2010) Int J Adv Manuf Technol , vol.55 , pp. 23-34
    • Sushil, K.1    Satsangi, P.S.2    Prajapati, D.R.3
  • 17
    • 41849108803 scopus 로고    scopus 로고
    • Determination of optimal parameters for SKD11 CNC turning process
    • DOI 10.1080/10426910801937975, PII 791989241
    • CJ Tzeng YK Yang 2008 Determination of optimal parameters for SKD11 CNC turning process Mater Manuf Process 23 4 363 368 10.1080/10426910801937975 (Pubitemid 351502891)
    • (2008) Materials and Manufacturing Processes , vol.23 , Issue.4 , pp. 363-368
    • Tzeng, C.-J.1    Yang, Y.-K.2
  • 18
    • 78650177569 scopus 로고    scopus 로고
    • Modeling and analysis of the edge disintegration in the EDM drilling cobalt-bonded tungsten carbide
    • 10.1007/s00170-010-2629-z
    • NM Liu KT Chiang JT Horng CC Chen 2010 Modeling and analysis of the edge disintegration in the EDM drilling cobalt-bonded tungsten carbide Int J Adv Manuf Technol 51 5-8 587 598 10.1007/s00170-010-2629-z
    • (2010) Int J Adv Manuf Technol , vol.51 , Issue.58 , pp. 587-598
    • Liu, N.M.1    Chiang, K.T.2    Horng, J.T.3    Chen, C.C.4
  • 19
    • 70349843350 scopus 로고    scopus 로고
    • Modeling and optimization of injection molding process parameters for thin-shell plastic parts
    • 10.1080/03602550902824630
    • MT Chuang YK Yang YH Hsiao 2009 Modeling and optimization of injection molding process parameters for thin-shell plastic parts Polymer Plast Tech Eng 48 7 745 753 10.1080/03602550902824630
    • (2009) Polymer Plast Tech Eng , vol.48 , Issue.7 , pp. 745-753
    • Chuang, M.T.1    Yang, Y.K.2    Hsiao, Y.H.3
  • 20
    • 70350106973 scopus 로고    scopus 로고
    • Some studies in metal matrix composites machining using response surface methodology
    • 10.1177/0731684408092375
    • VN Gaitonde SR Karnik J Paulo Davim 2009 Some studies in metal matrix composites machining using response surface methodology J Reinf Plast Compos 28 20 2445 2457 10.1177/0731684408092375
    • (2009) J Reinf Plast Compos , vol.28 , Issue.20 , pp. 2445-2457
    • Gaitonde, V.N.1    Karnik, S.R.2    Paulo Davim, J.3
  • 21
    • 55649107774 scopus 로고    scopus 로고
    • Prevention of defects in castings using back propagation neural networks
    • 10.1007/s00170-007-1289-0
    • DB Karunakar GL Datta 2008 Prevention of defects in castings using back propagation neural networks Int J Adv Manuf Technol 39 11-12 1111 1124 10.1007/s00170-007-1289-0
    • (2008) Int J Adv Manuf Technol , vol.39 , Issue.1112 , pp. 1111-1124
    • Karunakar, D.B.1    Datta, G.L.2
  • 22
    • 76849116375 scopus 로고    scopus 로고
    • Optimum creep feed grinding process conditions for Rene 80 super alloy using neural network
    • 10.1007/s12541-009-0040-1
    • A Vafaeesefat 2009 Optimum creep feed grinding process conditions for Rene 80 super alloy using neural network Int J Precis Eng Manuf 10 3 5 11 10.1007/s12541-009-0040-1
    • (2009) Int J Precis Eng Manuf , vol.10 , Issue.3 , pp. 5-11
    • Vafaeesefat, A.1
  • 23
    • 67651230570 scopus 로고    scopus 로고
    • An integrated study of surface roughness for modelling and optimization of cutting parameters during end milling operation
    • 10.1007/s00170-008-1763-3
    • H Öktem 2009 An integrated study of surface roughness for modelling and optimization of cutting parameters during end milling operation Int J Adv Manuf Technol 43 9-41 852 861 10.1007/s00170-008-1763-3
    • (2009) Int J Adv Manuf Technol , vol.43 , Issue.941 , pp. 852-861
    • Öktem, H.1
  • 24
    • 79953048459 scopus 로고    scopus 로고
    • Back prediction of high-strength sheet metal under air bending forming and tool design based on GA-BPNN
    • F Zemin M Jianhua 2011 Back prediction of high-strength sheet metal under air bending forming and tool design based on GA-BPNN Int J Adv Manuf Technol 53 5-8 473 483
    • (2011) Int J Adv Manuf Technol , vol.53 , Issue.58 , pp. 473-483
    • Zemin, F.1    Jianhua, M.2
  • 25
    • 31344443135 scopus 로고    scopus 로고
    • A systematic computer-aided approach to cooling system optimal design in plastic injection molding
    • DOI 10.1016/j.ijmecsci.2005.11.001, PII S0020740305002663
    • H Qiao 2006 A systematic computer-aided approach to cooling system optimal design in plastic injection molding Int J Mech Sci 48 4 430 439 1192.80018 10.1016/j.ijmecsci.2005.11.001 (Pubitemid 43145930)
    • (2006) International Journal of Mechanical Sciences , vol.48 , Issue.4 , pp. 430-439
    • Qiao, H.1
  • 26
    • 33645727038 scopus 로고    scopus 로고
    • Modeling and optimization of process parameters for defect toleranced drilling of GFRP composites
    • 10.1080/10426910500411587
    • S Arul D Samuel Raj L Vijayaraghavan SK Malhotra R Krishnamurthy 2006 Modeling and optimization of process parameters for defect toleranced drilling of GFRP composites Mater Manuf Process 21 4 357 365 10.1080/10426910500411587
    • (2006) Mater Manuf Process , vol.21 , Issue.4 , pp. 357-365
    • Arul, S.1    Samuel Raj, D.2    Vijayaraghavan, L.3    Malhotra, S.K.4    Krishnamurthy, R.5
  • 27
    • 56549122818 scopus 로고    scopus 로고
    • A simulated annealing approach for the multi-periodic rail-car fleet sizing problem
    • 1179.90039 10.1016/j.cor.2008.05.004
    • HR Sayarshad K Ghoseiri 2009 A simulated annealing approach for the multi-periodic rail-car fleet sizing problem Comput Oper Res 36 6 1789 1799 1179.90039 10.1016/j.cor.2008.05.004
    • (2009) Comput Oper Res , vol.36 , Issue.6 , pp. 1789-1799
    • Sayarshad, H.R.1    Ghoseiri, K.2
  • 28
    • 64249172118 scopus 로고    scopus 로고
    • Optimization of electric discharge machining using simulated annealing
    • 10.1016/j.jmatprotec.2008.10.053
    • SH Yang J Srinivas S Mohan DM Lee S Balaji 2009 Optimization of electric discharge machining using simulated annealing J Mater Process Technol 209 9 4471 4475 10.1016/j.jmatprotec.2008.10.053
    • (2009) J Mater Process Technol , vol.209 , Issue.9 , pp. 4471-4475
    • Yang, S.H.1    Srinivas, J.2    Mohan, S.3    Lee, D.M.4    Balaji, S.5
  • 29
    • 80052115365 scopus 로고    scopus 로고
    • Optimization of wire electrical discharge machining for pure tungsten using a neural network integrated simulated annealing approach
    • 10.1016/j.eswa.2010.04.020
    • HC Chen JC Lin YK Yang CH Tsai 2010 Optimization of wire electrical discharge machining for pure tungsten using a neural network integrated simulated annealing approach Exp Syst Appl 37 10 7147 7153 10.1016/j.eswa.2010. 04.020
    • (2010) Exp Syst Appl , vol.37 , Issue.10 , pp. 7147-7153
    • Chen, H.C.1    Lin, J.C.2    Yang, Y.K.3    Tsai, C.H.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.