Modeling of conventional hot compaction and Spark Plasma Sintering based on modified micromechanical models of porous materials

Mechanics of Materials

Volumn 49, Issue , 2012, Pages 72-91

  Wolff, Cyprien ^a,b   Mercier, Sébastien ^a   Couque, Hervé ^b   Molinari, Alain ^a  

^a UNIVERSITÉ PAUL VERLAINE METZ   (France)

^b Nexter Munitions   (France)

Author keywords

Hot isostatic pressing; Hot pressing; Micromechanical models; Simulation; Spark Plasma Sintering

Indexed keywords

CONSOLIDATION PROCESS; ELEVATED TEMPERATURE; HOT COMPACTION; MATERIAL BEHAVIOR; MICROMECHANICAL MODEL; MODEL PARAMETERS; MODIFIED MODEL; NEW PARAMETERS; POROUS SAMPLES; RELATIVE DENSITY; SIMULATION; SPARK PLASMA SINTERING (SPS); STRAIN RATE POTENTIALS; TIME-PERIODS; TWO-MATERIALS;

BORON; COMPOSITE MICROMECHANICS; COMPUTER SIMULATION; HOT ISOSTATIC PRESSING; HOT PRESSING; POROSITY; POROUS MATERIALS; SPARK PLASMA SINTERING;

COMPACTION;

EID: 84859438992     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechmat.2011.12.002     Document Type: Article

References (65)

1. M. Abouaf, and J. Chenot A numerical model for hot deformation of metal powders Journal of Theoretical and Applied Mechanics 5 1986 121 140
2. Andrews, J.P., 1924. The variation of Young's modulus at high temperature. In: Proceeding of the Physical Society, vol. 37, pp. 169-177.
3. U. Anselmi-Tamburini, S. Gennari, J. Garay, and Z. Munir Fundamental investigations on the spark plasma sintering/synthesis process ii. Modeling of current and temperature distributions Materials Science and Engineering A 394 2005 139 148 (Pubitemid 40599286)
4. Argento, C., Bouvard, D., Stutz, P., Charlier, R., Habraken, A.M., 1994. Numerical simulation of hot isostatic pressing of metal powder: influence of constitutive equations. In: Powder Metallurgy World Congress, Paris, vol. 1, pp. 725-728.
5. E. Arzt The influence of an increasing particle coordination on the densification of spherical powders Acta Metallurgica 30 1982 1883 1890
6. E. Arzt, M.F. Ashby, and K.E. Easterling Practical applications of hot-isostatic pressing diagrams: four case studies Metallurgica Transactions A 14 1983 211 221 (Pubitemid 13488471)
7. R. Baccino, and F. Moret Numerical modeling of powder metallurgy processes Materials and Design 21 2000 359 364 (Pubitemid 30233992)
8. R. Becker Ring fragmentation predictions using the Gurson model with material stability conditions as failure criteria International Journal of the Solids Structures 39 2002 3555 3580 (Pubitemid 34801320)
9. Bouaziz, O., Dellis, C., Stutz, P., 1997. Creation of a material data file for modelling hiping of an austenitic stainless steel. In: Proceeding of the International Workshop on Modelling of Metal Powder Forming Processes. INPG Grenoble, pp. 67-75.
10. D. Bouvard, and M. Lafer Determination of the densification kinetics of the metal powders by interrupted hot isostatic pressing tests Powder Metallurgy International 22 1989 11 15
11. B. Budiansky, J.W. Huchinson, and S. Slutsky Void growth and collapse in viscous solids H.G. Hopkins, M.J. Sewell, Mechanics of Solids The Rodney Hill 60th Anniversary vol. 13 1993 Pergamon Press Oxford 129 141
12. E.S. Chernikova, A.I. Raichenko, and E.A. Olevsky An analysis of electric heating of a cemented carbide taking into consideration the temperature relationship of its characteristics Powder Metallurgy and Metal Ceramics 31 1992 936 940
13. J. Cho, and K. Kim Densification of mixed metal powder at high temperature International Journal of Mechanical Sciences 43 2001 921 933 (Pubitemid 32070975)
14. A.C.F. Cocks Inelastic deformation of porous materials Journal of the Mechanics and Physics of Solids 37 1989 693 715
15. A.C.F. Cocks The structure of constitutive laws for the sintering of fine grained materials Acta Metallurgica et Materialia 42 1993 2191 2210
16. H. Couque, C. Wolff, L. Minier, S. Legallet, F. Bernard, and G. Nicolas Temperature distribution during the transitory and stationary phases for the electrical field material processing sps of conducting and non-conducting materials Proceedings of Advanced Processing for Novel Functional Materials 2008 MPI Dresden 407 416
17. C. Czarnota, N. Jacques, S. Mercier, and A. Molinari Modelling of dynamic fracture and application to the simulation of plate impact tests on tantalum Journal of Mechanics and Physics Solids 56 2008 1624 1650 (Pubitemid 351400772)
18. Z.Z. Du, and A.C.F. Cocks Constitutive models for the sintering of ceramic components-i. material models Acta Metallurgica et Materialia 40 1992 1969 1979 (Pubitemid 23564602)
19. J. Duva, and P. Crow The densification of powders by power-law creep during hot isostatic pressing Acta Metallurgica et Materialia 40 1992 31 35
20. J.M. Duva, and J.W. Hutchinson Constitutive potentials for dilutely voided nonlinear materials Mechanics of Materials 3 1984 41 54 (Pubitemid 14601368)
21. N.A. Fleck, L.T. Kuhn, and R.M. McMeeking Yielding of metal powder bonded by isolated contacts Journal of the Mechanics and Physics of Solids 40 1992 1139 1162
22. H.J. Frost, and M.F. Ashby Deformation-Mechanism Maps 1982 Pergamon Press Oxford, UK
23. C. Geindreau, D. Bouvard, and P. Doremus Constitutive behaviour of metal powder during hot forming. Part I: experimental investigation with lead powder as a simulation material European Journal of Mechanics - A/Solids 18 1999 581 596 (Pubitemid 30510414)
24. C. Geindreau, D. Bouvard, and P. Doremus Constitutive behaviour of metal powder during hot forming. Part II: unified viscoplastic modelling European Journal of Mechanics - A/Solids 18 1999 597 615 (Pubitemid 30510415)
25. R. Green A plasticity theory for porous solids International Journal of Mechanical Sciences 14 1972 215 224
26. A.L. Gurson Continuum theory of ductile rupture by void nucleation and growth: part 1 - yield criteria and flow rules for porous ductile media Journal of Engineering Materials and Technology 99 1977 2 15
27. A. Helle, K. Easterling, and M. Ashby Hot-isostatic pressing diagrams: new developments Acta Metallurgica 33 1985 2163 2174 (Pubitemid 15605577)
28. W. Hemminger Thermal conductivity of lead in the range 180-500 °C International Journal of Thermophysics 10 1989 765 777
29. R. Hill The essential structure of constitutive laws for metal composites and polycrystals Journal of the Mechanics and Physics of Solids 15 1967 79 95
30. J.N. Johnson Dynamic fracture and spallation in ductile solids Journal of Applied Physics 52 1981 2812 2825 (Pubitemid 11417589)
31. K.T. Kim, and Y.C. Jeon Densification behavior and grain growth of tool steel powder under high temperature Acta Materialia 46 1998 5745 5754 (Pubitemid 128426106)
32. T. Kraft, and H. Riedel Numerical simulation of solid state sintering; model and application Journal of the European Ceramic Society 24 2004 345 361 (Pubitemid 37554318)
33. H.A. Kuhn, and C.L. Downey Deformation characteristics and plasticity theory of sintered powder materials International Journal of Powder Metallurgy 7 1971 15 25
34. L.T. Kuhn, and R.M. McMeeking Power-law creep of powder bonded by isolated contacts International Journal of Mechanical Sciences 34 1992 563 573
35. J. Mackenzie The elastic constants of a solid containing spherical holes Proceedings of Physical Society of London 63B 1958 2 11
36. Mark, L.S., Bausmeister, T., Avallone, A., 1978. Mark's Standard Handbook for Mechanical Engineers, eighth Edition.
37. J.C. Maxwell A Treatise on Electricity and Magnetism 1873 Clarendon Press Oxford
38. McWilliam, B.A., 2008. Numerical simulation of electric field assisted sintering. Ph.D. Thesis, Drexel University, United States.
39. B. McWilliam, and A. Zavaliangos Multi-phenomena simulation of electric field assisted sintering Journal of Materials Science 43 2008 5031 5035
40. J.C. Michel, and P. Suquet The constitutive law of nonlinear viscous and porous materials Journal of the Mechanics and Physics of Solids 40 1992 783 812
41. S. Munoz, and U. Anselmi-Tamburini Temperature and stress field evolution during spark plasma sintering processes Journal of Materials Science 45 2010 6528 6539
42. Nicolle, C., 1999. Mise en forme de poudre de bore par compression isostatique à chaud: determination des propriétés rhéologiques et simulation numérique du procédé. Ph.D. Thesis, Université de Bourgogne, France.
43. E. Olevsky, and L. Froyen Constitutive modeling of spark-plasma sintering of conductive materials Scripta Materialia 55 12 2006 1175 1178 (Pubitemid 44529079)
44. E. Olevsky, and L. Froyen Impact of thermal diffusion on densification during sps Journal of American Ceramic Society 92 2009 S122 S132
45. Olevsky, E., Skorohod, V., 1988. Some questions of sintering kinetics under external forces influence. In: Technological and Design Plasticity of Porous Materials. IPMS NAS, Ukraine.
46. R. Orru, R. Licheri, A.M. Locci, A. Cincotti, and G. Cao Consolidation/synthesis of materials by electric current activated/assisted sintering Materials Science and Engineering: R: Reports 63 2009 127 287
47. Perry, R.H., Green, D.W., Maloney, J.O., 1984. Perry's Chemical Engineer's Handbook, sixth ed.
48. W.B. Piertenpol, and H.A. Miley Electrical resistivities and temperature coefficient of lead, tin, zinc, and bismuth in the solid and liquid states Physical Review 34 1929 1588 1600
49. P. Ponte-Castaneda The effective mechanical properties of nonlinear isotropic composites Journal of the Mechanics and Physics of Solids 39 1991 45 71
50. J.R. Rice, and D.M. Tracey On the ductile enlargement of voids in triaxial stress fields Journal of the Mechanics and Physics of Solids 17 1969 201 217
51. H. Riedel, D. Meyer, J. Svoboda, and H. Zipse Numerical simulation of die pressing and sintering - development of constitutive equations International Journal of Refractory Metals and Hard Materials 12 1994 55 60
52. S. Shima, and M. Oyane Plasticity theory for porous metals International Journal of Mechanical Sciences 18 1976 285 291
53. V.V. Skorohod Rheological Basis of the Theory of Sintering 1972 Naukova Dumka Kiev
54. P. Sofronis, and R.M. McMeeking Creep of power-law material containing spherical voids Journal of Applied Mechanics 59 1992 88 95
55. M.C. Song, H.G. Kim, and K.T. Kim Creep densification of cooper powder compact International Journal of Mechanics Sciences 38 1996 1197 1208 (Pubitemid 126374476)
56. Stokes, A.R., Wilson, A.J., 1941. The thermal expansion of lead from 0 °C to 320 °C. In: Proceeding of the Physical Society, vol. 53, pp. 658-662.
57. D. Tiwari, B. Basu, and K. Biswas Simulation of thermal and electric field evolution during spark plasma sintering Ceramics International 35 2009 699 708
58. Tokita, M., 1999. Trends in advanced SPS systems and FGM technology. In: Proceedings of NEDO International Symposium on functionally graded materials, Tokyo, Japan, pp. 23-33.
59. V. Tvergaard, and A. Needleman An analysis of the cup-cone fracture in a round tensile bar Acta Metallurgica 32 1984 157 167
60. K. Vanmeensel, A. Laptev, J. Hennicke, J. Vleugels, and O. Van der Biest Modelling of the temperature distribution during field assisted sintering Acta Materialia 53 2005 4379 4388 (Pubitemid 41214750)
61. X. Wang, S.R. Casolco, G. Xu, and J.E. Garay Finite element modeling of electric current-activated sintering: the effect of coupled electrical potential, temperature and stress Acta Materialia 55 2007 3611 3622 (Pubitemid 46670074)
62. D. Wilkinson, and M. Ashby Pressure sintering by power law creep Acta Metallurgica 23 1975 1277 1285
63. Wolff, C., 2011. Modélisation du processus thermo-électro- mécanique de Frittage Flash. Ph.D. Thesis, Metz University, France.
64. W. Yucheng, and F. Zhengyi Study of temperature field in spark plasma sintering Materials Science and Engineering B90 2002 34 37 (Pubitemid 34116108)
65. A. Zavaliangos, J. Zhang, M. Krammer, and J.R. Groza Temperature evolution during field activated sintering Materials Science and Engineering A379 2004 218 228 (Pubitemid 38964564)