Constitutive behaviour of metal powder during hot forming. Part I: experimental investigation with lead powder as a simulation material

European Journal of Mechanics, A/Solids

Volumn 18, Issue 4, 1999, Pages 581-596

  Geindreau, Christian ^a   Bouvard, Didier ^b   Doremus, Pierre ^a  

^a LABORATOIRE SOLS SOLIDES STRUCTURES   (France)

^b GRENOBLE INSTITUTE OF TECHNOLOGY   (France)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSION TESTING; COMPUTER SIMULATION; FINITE ELEMENT METHOD; HOT ISOSTATIC PRESSING; LEAD; MECHANICAL VARIABLES MEASUREMENT; MORPHOLOGY; POWDER METALS; RHEOLOGY; STRAIN RATE; STRESSES; VISCOPLASTICITY;

DIE PRESSING TEST; LEAD POWDER; RADIAL STRESS MEASUREMENT; UNIAXIAL COMPRESSION TESTING;

PLASTIC DEFORMATION;

EID: 0033157741     PISSN: 09977538     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0997-7538(99)00102-3     Document Type: Article

References (34)

1. Abondance D., Baccino R., Bernier F., Moret F., de Monicault J.-M., Guichard D., Stutz P., Bouvard D., 1994. Numerical modelling of near-shape hiping of TA6V. In: Proc. of the Powder Metallurgy World Congress PM '94, les Editions de Physiques, Vol. 1, Les Ulis, France, pp. 797-800.
2. Abouaf M., 1985. Modélisation de la Compaction des Poudres Métalliques Frittées. Doctorat d'état, Université Joseph Fourier et Institut National Polytechnique de Grenoble.
3. Abouaf M., Chenot J.-L., 1986. Modélisation numérique de la déformation à chaud de poudres métalliques. J. Theorical Appl. Mech. 5 (1), 121-140.
4. Argento C., Bouvard D., Stutz P., 1998. Phenomenological Constitutive Equations for Pressure Sintering of Metal Powders at High Temperature. Submitted for publication.
5. Arzt E., Ashby M.F., Easterling K.E., 1983. Practical application of hot isostatic pressing diagrams: Four case studies. Metall. Trans. 14A, 211.
6. Ashby M.F., 1974. A first report on sintering diagrams. Acta Metall. 22, 275.
7. Auriault J.-L., Bouvard D., Dellis C., Lafer M., 1992. Modelling of hot compaction of metal powder by homogenization. Mech. Mater. 13, 247-255.
8. Bonnenfant D., 1996. Analyse Théorique et Expérimentale du Comportement de Composites Particulaires Modèles en Vue de leur Mise en Forme par Compaction à Chaud. Ph.D thesis, Université de la Méditerranée, Marseille.
9. Bouaziz O., Dellis C., Stutz P., 1997. Creation of a material data file for modelling hiping of an austenitic stainless steel. In: INPG Eds, Proc. of the International Workshop on Modelling of Metal Powder Forming Processes, Grenoble, France, pp. 67-75.
10. Bouvard D., Cheynet M.C., Saint Antonin F., 1986. Densification behaviour of argon atomized powders during hot isostatic pressing. In: Proc. of the Third International Conference on Isostatic Pressing, London, MPR, Publishing Services, Paper No. 14, Strattford upon Avon.
11. Bouvard D., Ouedraogo E., 1986. A simulation material for modelling the hot-forming of metal powders. Powder Technology 46, 255-262.
12. Bouvard D., Lafer M., 1989a. Determination of the kinetics of metal powders by interrupted hot isostatic pressing test. Powder Metallurgy International 21, 11.
13. Bouvard D., Lafer M., 1989b. Rheological characterization of metal powder at high temperature. In: 1989 Advances in Powder Metallurgy, MPIF, Vol. 1, Princeton, USA, pp. 491-503.
14. Brown S., Abou-Chedid G., 1994. Yield behavior of metal powder assemblages. J. Mech. Phys. Solids 42 (3), 383-399.
15. Chaboche J.L., 1989. Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int. J. Plasticity 5, 247-302.
16. Cocks A.C.F., 1989. Inelastic deformation of porous materials. J. Mech. Phys. Solids 37, 693-715.
17. Dellis C., Bouaziz O., Baccino R., Moret F., 1997. Hip'ing simulation evaluation through comparison of measures on 2D and 3D manufactured parts with PRECAD numerical results. In: INPG Eds, Proc. of the International Workshop on Modelling of Metal Powder Forming Processes, Grenoble, France, pp. 305-314.
18. Ernst E., Barnekow D., 1994. Pressure, friction and density during axial powder compaction. In: Proc. World Congress on Powder Metallurgy PM '94, Vol. 1, Les Editions de Physiques, Les Ulis, France, pp. 673-676.
19. Froes, F.H., 1995. P.M. in aerospace, defense and demanding applications - 1995. In: Froes F.H. (Ed.), Proc. of the 4th International Conference on the Powder Metallurgy in Aerospace, Defense and Demanding Applications, Anaheim, Canada.
20. Geindreau C., 1996. Modélisation du Comportement Viscoplastique des Poudres Métalliques. Simulation à l'Aide d'un Matériau Analogique. Ph.D thesis, Université Joseph Fourier de Grenoble, Grenoble.
21. Jinka A.G.K., Lewis R.W., 1994. Finite element simulation of hot isostatic pressing of metal powders. Comput. Methods Appl. Mech. Engrg. 114, 249-272.
22. Kim K.T., Jeon Y.C., 1997. Densification behavior of 316L stainless steel powder under high temperature. In: INPG Eds, Proc. of the International Workshop on Modelling of Metal Powder Forming Processes, Grenoble, France, pp. 77-86.
23. Kim K.T., Kwon Y.S., Kim H.G., 1997. Near-net-shape forming of alumina powder under hot pressing and hot isostatic pressing. Int. J. Mech. Sci. 39 (9), 1011-1022.
24. Lemaitre J., Chaboche J.L., 1985. Mécanique des Matériaux Solides. Dunod, Paris.
25. McCoy J.K., Muttard L.E., Willis R., 1985. Continuous monitoring of volumetric changes in ceramic powder compacts during hot isostatic pressing. Am. Ceram. Soc. Bull. 64, 1240-1244.
26. Mosbah P., Bouvard D., Ouedraogo E., Stutz P., 1997. Experimental techniques for analysis of die pressing and ejection of metal powder. Powder Technology 40 (4), 269-277.
27. Nohara A., Soh T., Nakagawa T., 1986. Numerical solution of hot isostatic pressing, In: Proc. of the Third International Conference on Isostatic Pressing, Paper No. 11, London, MPR, Publishing Services, Strattford upon Avon.
28. Watatani S., Pielher H.R., Watkins D.M., 1994. Hot triaxial compaction: The effect of shear stress on the Al powder compact densification process. In: Delay L. and Tas H. (Eds), Proc. Hot Isostatic Pressing '93, Elsevier Science B.V., Antwerp, Belgium, pp. 37-44.
29. Seliverstov D., Samarov V., Goloveskin V., Alexandrov S., Ekstrom P., 1994. Capsule design for HIP of complex part. In: Delay L. and Tas H. (Eds), Proc. Hot Isostatic Pressing '93, Elsevier Science B.V., Antwerp, Belgium, pp. 555-560.
30. Strijbos S., Rankin P.J., Klein-Wassink R.J., Bannink J., Oudemans G.J., 1977. Stresses occurring during one-side die compaction of powder. Powder Technology 18, 187-200.
31. Svoboda A., Häggblad H.-A., Laptev A., Bouaziz O., Dellis C., 1997. Experimental characterisation of powder for use in simulation of hot isostatic pressing. In: INPG Eds, Proc. of the International Workshop on Modelling of Metal Powder Forming Processes, Grenoble, France, pp. 87-94.
32. Swinkels F.B., Wilkinson D.S., Artz E., Ashby M.F., 1983. Mechanisms of hot-isostatic pressing. Acta Metall. 31 (11), 1829-1840.
33. Turner C.D., Ashby M.F., 1994. Experimental and theoretical modelling of the isostatic pressing of composite powders. In: Delay L. and Tas H. (Eds), Proc. of Hot Isostatic Pressing '93, Elsevier Science B.V., Rotterdam, pp. 3-14.
34. Wadley H.N.G., Kahn A.H., Gefen Y., Mester M., 1987. Eddy current measurement of density during hot pressing. In: Proc. of the Conference on Congress in Quantitative Nondestructive Evaluation, Williamsburg, U.S.A.