The influence of Cr on the solidification behavior of polycrystalline γ(Ni)/γ'(Ni 3Al)-δ(Ni 3Nb) eutectic Ni-base superalloys

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 43, Issue 4, 2012, Pages 1259-1267

  Xie, Mengtao ^a   Helmink, Randolph ^b   Tin, Sammy ^a  

^a Illinois Institute of Technology   (United States)

^b ROLLS ROYCE CORPORATION   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AS CAST ALLOY; AS CAST MICROSTRUCTURE; CR ADDITION; EUTECTIC ALLOYS; EUTECTIC MICROSTRUCTURE; INTERDENDRITIC REGIONS; LAST STAGE; LIQUIDUS; MORPHOLOGICAL CHANGES; NEAR-EUTECTIC COMPOSITION; NI-BASE SUPERALLOYS; POLYCRYSTALLINE; PRECIPITATION TEMPERATURE; PSEUDO-BINARIES; SOLIDIFICATION CHARACTERISTICS; TERNARY EUTECTICS; THERMODYNAMIC CALCULATIONS;

ALUMINUM; EUTECTICS; MICROSTRUCTURE;

SOLIDIFICATION;

EID: 84859269249     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-011-0969-4     Document Type: Article

References (40)

1. T. M. Pollock and S. Tin: J. Propul. Power, 2006, vol. 22, p. 361.
2. C. T. Sims, N. S. Stoloff, and W. C. Hagel: Superalloys II, Wiley, New York, NY, 1987, p. 97.
3. R. C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, New York, NY, 2006, p. 372.
4. M. Durand-Charre: The Microstructure of Superalloys, Gordon and Breach Science, Amsterdam, The Netherlands, 1997.
5. M. J. Donachie and S. J. Donachie: Superalloys: A Technical Guide, ASM International Publication, Materials Park, OH, 2002.
6. D. Furrer and H. Fecht: JOM, 1999, vol. 1, pp. 14-17.
7. L. P. Jahnke and C. A. Bruch: Specialists Meeting on Directionally Solidified In Situ Composites, Washington, DC, 1974, pp. 3-12.
8. R. L. Ashbrook: Specialists Meeting on Directionally Solidified In Situ Composites, Washington, DC, 1974, pp. 21-25.
9. R. H. Barklow, J. J. Jackson, M. Gell, and G. R. Leverant: Conf. on In Situ Composites-II, Lexington, MA, 1976, pp. 549-59.
10. A. Lawley: Conf. on In Situ Composites-II, Lexington, MA, 1976, pp. 451-73.
11. A. D. Cetel, M. Gell, and J. W. Glatz: Conf. on In Situ Composites-III, Boston, MA, 1978, pp. 292-302.
12. C. Hoffmann, P. Bhowal, and A. J. McEvily: Conf. on In Situ Composites-IV, Boston, MA, 1982, pp. 69-83.
13. E. M. Breinan, E. R. Thompson, and F. D. Lemkey: Conf. on In Situ Composites, Lakeville, CT, 1972, pp. 201-22.
14. H. R. Bertorello, R. W. Hertzberg, and R. W. Kraft: Int. Conf. on In Situ Composites-II, Lake George, NY, 1975, pp. 517-25.
15. E. M. Breinan, G. P. McCarthy, and E. R. Thompson: Conf. on In Situ Composites-II, Bolton Landing, NY, 1976, pp. 573-86.
16. E. H. Kraft and E. R. Thompson: Conf. on In Situ Composites-II, Lakeville, CT, 1973, pp. 261-71.
17. F. D. Lemkey and E. R. Thompson: Conf. on In Situ Composites-II, Lakeville, CT, 1972, pp. 105-19.
18. M. Gell: Specialists Meeting on Directionally Solidified In Situ Composites, Washington, DC, 1974, pp. 117-28.
19. S. N. Tewari, C. M. Scheuermann, and C. W. Andrews: Conf. on In Situ Composites-II, Bolton Landing, NY, 1976, pp. 191-200.
20. H. R. Gray and W. A. Sanders: Conf. on In Situ Composites-II, Bolton Landing, NY, 1976, pp. 201-10.
21. F. R. Mollard and B. Lux: Conf. on In Situ Composites-II, Lexington, MA, 1976, pp. 385-96.
22. K. D. Sheffler, R. H. Barkalow, and A. Yuen: Conf. on In Situ Composites-II, Lake George, NY, 1975, pp. 353-63.
23. E. H. Kraft and E. R. Thompson: Conf. on In Situ Composites-II, Bolton Landing, NY, 1976, pp. 297-307.
24. F. D. Lemkey and G. P. McCarthy: Conf. on In Situ Composites-II, Lexington, MA, 1976, pp. 77-88.
25. N. Saunders: Aluminium-Niobium-Nickel, Ternary Alloys, MSI, VCH, Berlin, Heidelberg, 1993, pp. 348-57.
26. E. C. Caldwell, F. J. Fela, and G. E. Fuchs: JOM, 2004, vol. 56, pp. 44-48.
27. W. Kurz and D. J. Fisher: Fundamentals of Solidification, 3rd ed., Trans Tech Publications Ltd, Aedermannsdorf, Switzerland, 1989, p. 34.
28. W. Kurz and D. J. Fisher: Int. Met. Rev., 1979, vols. 5-6, pp. 177-204.
29. S. M. Li, B. L. Jiang, B. L. Ma, and H. Z. Fu: J. Cryst. Growth, 2007, vol. 299, pp. 178-83.
30. Y. Du, S. Liu, Y. A. Chang, and Y. Yang: CALPHAD, 2005, vol. 29, pp. 140-48.
31. L. M. Hogan, R. W. Kraft, and F. D. Lemkey: Adv. Mater. Res., 1971, vol. 5, pp. 83-216.
32. D. C. Jenkinson and L. M. Hogan: J. Cryst. Growth, 1975, vol. 28, pp. 171-87.
33. B. Toloui and A. Hellawell: Acta Metall., 1976, vol. 24, pp. 565-73.
34. O. A. Atasoy, F. Yilmaz, and R. Elliot: J. Cryst. Growth, 1984, vol. 66, pp. 137-46.
35. K. F. Kobayashi and L. M. Hogan: J. Mater. Sci., 1985, vol. 20, pp. 1961-75.
36. S. Lu and A. Hellawell: J. Cryst. Growth, 1985, vol. 73, pp. 316-28.
37. K. Nogita and A. K. Dahle: Scripta Mater., 2003, vol. 48, pp. 307-13.
38. A. Knuutinen, K. Notiga, S. D. McDonald, and A. K. Dahle: J. Light Metals, 2001, vol. 1, pp. 229-40.
39. H. E. Cline and J. L. Walter: Metal. Trans., 1970, vol. 1, pp. 2907-17.
40. R. S. Fidler, M. R. Croker, and R. W. Smith: J. Cryst. Growth, 1972, vol. 13, pp. 739-46.