An introduction to computational micromechanics

Lecture Notes in Applied and Computational Mechanics

Volumn 20, Issue , 2005, Pages 1-195

  Zohdi, Tarek I ^a   Wriggers, Peter ^b  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b LEIBNIZ UNIVERSITY HANNOVER   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84858397692     PISSN: 16137736     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Article

References (252)

1. Aboudi, J. (1992). Mechanics of composite materials-a unified micromechanical approach. Elsevier, 29.
2. Ainsworth, M. and Oden, J. T. (2000). A posterori error estimation in finite element analysis. John-Wiley
3. Ames, W. F. (1965). Nonlinear Partial differential equations in engineering. Academic Press.
4. Ames, W. F. (1977). Numerical methods for partial differential equations. 2nd edition. Academic Press.
5. Amieur, M., Hazanov, S. and Huet, C. (1993). Numerical and experimental study of size and boundary conditions effects on the apparent properties of specimens not having the representative volume. In: C. Huet, (Ed.). Micromechanics of Concrete and Cementitious Composite.
6. Amieur, M. (1994). Etude numérique et expérimentale des effets d'échelle et de conditions aux limites sur des éprouvettes de béton n'ayant pas le volume représentatif. Doctoral dissertation No 1256, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.
7. Amieur, M., Hazanov, S. and Huet, C. (1995). Numerical and experimental assessment of the size and boundary conditions effects for the overall properties of granular composite bodies smaller than the representative volume. In: D. F. Parker and A. H. England, (Eds.). IUTAM Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics, Kluwer Academic Publishers, The Netherlands. 149-154.
8. Ashby, M. A. and Jones, D. R. H. (1992). Engineering materials 2. An introduction to microstructures, processing and design. Pergamon Press.
9. Axelsson, O. (1994). Iterative solution methods. Cambridge University Press.
10. Babúska, I. and Rheinbolt, W. C. (1978). A posteriori error estimates for the finite element method. The International Journal for Numerical Methods in Engineering. 12, 1597-1615.
11. Babúska, I. and Miller, A. D. (1987). A feedback finite element method with a-posteriori error estimation. Part I. Computer Methods in Applied Mechanics and Engineering. 61, 1-40.
12. Babúska, I., Andersson, B., Smith, P. J. and Levin, K. (1999). Hierarchical modeling of heterogeneous solids. Damage analysis of fiber composites Part I: Statistical analysis on fiber scale. Computer Methods in Applied Mechanics and Engineering. 172, 27-77.
13. Basquin, O. H. (1910). The exponential law of endurance tests. Proceedings of the American Society for Testing and Materials. 10, 625-630.
14. Bathe, K. J. (1996). Finite element procedures. Prentice-Hall.
15. Becker, E. B., Carey, G. F. and Oden J. T. (1980). Finite elements: an introduction. Prentice- Hall.
16. Belsky, V., Beall, M. W., Fish, J., Shephard, M. S. and Gomaa, S. (1995). Computer-aided multiscale modeling tools for composite materials and structures. International Journal of Computing Systems in Engineering. 6(3), 213-223.
17. Bonet, J. and Wood, R. D. (1997). Nonlinear continuum mechanics for finite element analysis. Cambridge University Press.
18. Briggs, W. (1987). A multigrid tutorial. Siam Issue.
19. Budiansky, B. (1965). On the elastic moduli of some heterogeneous materials. Journal of the Mechanics and Physics of Solids. 13, 223-227.
20. Carol, I., Rizzi, E. and Willam, K. (1994). A unified theory of elastic degradation and damage based on a loading surface. The International Journal of Solids and Structures. 31(20), 2835-2865.
21. Carey, G. F. and Oden J. T. (1983). Finite elements: a second course. Prentice-hall.
22. Casey, J. (1985). Approximate kinematical relations in plasticity. The International Journal of Solids and Structures. 21, 671-682.
23. Champaney, L., Cognard, J., Dureisseix D. and Ladeveze, P. (1997). Large scale applications on parallel computers of a mixed domain decomposition method. ComputationalMechanics. 19(4), 253-263.
24. Chandrasekharaiah, D. S. and Debnath, L. (1994). Continuum mechanics. Academic press.
25. Chen, W. and Fish, J. (2001). A dispersive model for wave propagation in periodic heterogeneous media based on homogenization with multiple spatial and temporal scales. Journal of Applied Mechanics. 68(2), 153-161.
26. Cherkaev, A. V. and Gibiansky, L. V. (1992). The exact coupled bounds for effective tensors of electrical and magnetic properties of two-component two-dimensional composites. Proceedings of the Royal Society of Edinburgh. 122A, 93-125.
27. Christensen, R. (1990). A critical evaluation for a class of micromechanics models. Journal of the Mechanics and Physics of Solids. 38(3), 379-404.
28. Ciarlet, P. G. (1993). Mathematical elasticity. Elsevier.
29. Courant, R. (1943). Variational methods for the solution of problems of equilibrium and vibration. Bulletin of the American Mathematical Society. 49, 1-23.
30. Crank, J. (1975). The mathematics of diffusion. 2nd. edition. Oxford Science Publications,
31. Davidon, W. C. (1959). Variable metric method for minimization. Research and development report. ANL-5990 (Ref.). U.S. Atomic Energy Commision, Argonne National Laboratories.
32. Davis, L. (1991). Handbook of genetic algorithms. Thompson Computer Press.
33. Do, I. P. H. and Benson, D. (2001). Micromechanical modeling of shock-induced chemical reactions in multi-material powder mixtures. International Journal of Plasticity. 17, 641-668.
34. Doltsinis, I. St. (1993). Coupled field problems-solution techniques for sequential and parallel processing. In: M. Papadrakakis (Ed.). Solving Large-scale Problems in Mechanics.
35. Doltsinis, I. St. (1997). Solution of coupled systems by distinct operators. Engineering Computations. 14, 829-868.
36. Eshelby, J. D. (1957). The elastic field of an ellipsoidal inclusion, and related problems. Proceedings of the Royal Society A241, 376-396.
37. Eustathopoulos, N. and Mortensen, A. (1993). Capillary phenomena, interfacial bonding and reactivity. In: S. Suresh, A. Mortensen and A. Needleman (Eds.). Fundamentals of Metal Matrix Composites. Butterworth-Heineman publishers.
38. Fiacco, A. V. and McCormick G. P. (1990). Nonlinear programming: sequential unconstrained minimization techniques. Siam reissue. John Wiley and Sons, New York and Toronto.
39. Fish, J. and Wagiman, A. (1993). Multiscale finite element method for a locally nonperiodic heterogeneous medium. Computational Machanics. 12, 164-180.
40. Fish, J., Pandheeradi, M. and Belsky, V. (1995). An efficient multilevel solution scheme for large scale nonlinear systems. International Journal for Numerical Methods in Engineering. 38, 1597-1610.
41. Fish, J. and Belsky, V. (1995). Multigrid method for periodic heterogeneous media Part I: Convergence studies for one dimensional case. Computer Methods in Applied Mechanics and Engineering. 126, 1-16.
42. Fish, J. and Belsky, V. (1995). Multigrid method for periodic heterogeneous media Part II: Multiscale modeling and quality control in multidimensional case. Computer Methods in Applied Mechanics and Engineering. 126, 17-38.
43. Fish, J. and Belsky, V. (1997). Generalized aggregation multilevel solver. International Journal for Numerical Methods in Engineering. 40, 4341-4361.
44. Fish, J., Shek, K., Pandheeradi, M. and Shephard, M. S. (1997). Computational plasticity for composite structures based on mathematical homogenization: Theory and practice. Computer Methods in Applied Mechanics and Engineering. 148(1-2), 53-73.
45. Fish, J., Yu, Q. and Shek, K. L. (1999). Computational damage mechanics for composite materials based on mathematical homogenization. International Journal for Numerical Methods in Engineering. 45, 1657-1679.
46. Fish, J. and Shek, K. (1999). Finite deformation plasticity for composite structures: Computational models and adaptive strategies. Computer Methods in Applied Mechanics and Engineering. 172, 145-174.
47. Fish, J. and Ghouli, A. (2001). Multiscale analytical sensitivity analysis for composite materials. International Journal for Numerical Methods in Engineering. 50, 1501-1520.
48. Fish, J. and Yu, Q. (2001). Multiscale damage modeling for composite materials: theory and computational framework. International Journal for Numerical Methods in Engineering. 52(1-2), 161-192.
49. Fish, J. and Chen, W. (2001). Uniformly valid multiple spatial-temporal scale modeling for wave propagation in heterogeneous media. Mechanics of Composite Materials and Structures. 8, 81-99.
50. Flynn, C. P. (1972). Point defects and diffusion. Clarendon Press, Oxford.
51. Fu, Y., Klimkowski, K., Rodin, G. J., Berger, E., Browne, J. C., Singer, J. K., Van de Geijn, R. A. and Vemaganti, K. (1998). Fast solution method for three-dimensional many-particle problems of linear elasticity. The International Journal of Numerical Methods in Engineering. 42, 1215-1229.
52. Fletcher, R. and Powell, M. J. D. (1963). A rapidly convergent descent method for minimization. Computer Journal. 7, 149-154.
53. Frankel, S. P. (1950). Convergence rates of iterative treatments of partial differential equations. Mathematical Tables and Other Aids to Computations. 4, 65-75.
54. Ghosh, S. and Mukhopadhyay, S. N. (1993). A material based finite element analysis of heterogeneous media involving Dirichlet tessellations. Computer Methods in Applied Mechanics and Engineering. 104, 211-247.
55. Ghosh, S. and Moorthy, S. (1995). Elastic-plastic analysis of arbitrary heterogeneous materials with the Voronoi Cell finite element method. Computer Methods in Applied Mechanics and Engineering. 121(1-4), 373-409.
56. Ghosh, S., Kyunghoon, L. and Moorthy, S. (1996). Two scale analysis of heterogeneous elastic-plastic materials with asymptotic homogenization and Voronoi cell finite element model. Computer Methods in Applied Mechanics and Engineering. 132(1-2), 63-116
57. Ghosh, S. and Moorthy, S. (1998). Particle fracture simulation in non-uniform microstructures of metal-matrix composites. Acta mater. 46(3), 965-982.
58. Ghosh, S., Lee, K. and Raghavan, P. (2001). A multi-level computational model for multiscale damage analysis in composite and porous materials. International Journal of Solids and Structures. 38, 2335-2385.
59. Ghosh, S., Ling, Y., Majumdar, B. and Kim, R. (2001). Interfacial debonding analysis in multiple fiber reinforced composites. Mechanics of Materials. 32, 562-591.
60. Ghosh, S., Kyunghoon, L. and Moorthy, S. (1996). Two scale analysis of heterogeneous elastic-plastic materials with asymptotic homogenization and Voronoi cell finite element model. Computer Methods in Applied Mechanics and Engineering. 132(1-2), 63-116.
61. Gill, P., Murray, W. and Wright, M. (1995). Practical optimization. Academic Press.
62. Golanski, D., Terada, K. and Kikuchi, N. (1997). Macro and micro scale modeling of thermal residual stresses in metal matrix composite surface layers by the homogenization method. Computational Mechanics. 19(3), 188-202.
63. Goldberg, D. E. (1989). Genetic algorithms in search, optimization and machine learning. Addison-Wesley.
64. Goldberg, D. E. and Deb, K. (2000). Special issue on Genetic Algorithms. Computer Methods in Applied Mechanics and Engineering. 186(2-4), 121-124.
65. González, C. and Llorca, J. (2003). An analysis of the effect of hydrostatic pressure on the tensile deformation of aluminum-matrix composites. Materials Science and Engineering: A, Elsevier. 341(1), 256-263(8).
66. González, C. and Llorca, J. (2001). Micromechanical modelling of deformation and failure in Ti-6Al-4V/SiC composites. Acta Materialia. 49, 3505-3519.
67. González, C. and Llorca, J. (2000). A self-consistent approach to the elasto-plastic behaviour of two-phase materials including damage. Journal of the Mechanics and Physics of Solids. 48, 675-692.
68. Green, A. E. and Naghdi, P. M. (1965). A general theory of an elasto-plastic continuum. Archive for Rational Mechanics and Analysis. 18, 251-281.
69. Green, A. E. and Naghdi, P. M. (1971). Some remarks on elastoplastic deformation at finite strain. International Journal of Engineering Science. 9, 1219-1229.
70. Guedes, J. M. and Kikuchi, N. (1990). Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element methods. Computer Methods in Applied Mechanics and Engineering. 83, 143-198.
71. Guidoum, A. and Navi, P. (1993). Numerical simulation of thermo-mechanical behaviour of concrete through a 3-D granular cohesive model. In: C. Huet, (Ed.) Micromechanics of Concrete and Cementitious Composites. Presses Polytechniques et Universitaires Romandes, Lausanne. pp. 213-228.
72. Guidoum, A. (1994). Simulation numérique 3D des comportements des bétons en tant que composites granulaires. Doctoral Dissertation No 1310. Ecole Polytechnique de Lausanne, Switzerland.
73. Gurtin, M. (1981). An introduction to continuum mechanics. Academic Press.
74. Hashin, Z. and Shtrikman, S. (1962). On some variational principles in anisotropic and nonhomogeneous elasticity. Journal of the Mechanics and Physics of Solids. 10, 335-342.
75. Hashin, Z. and Shtrikman, S. (1963). A variational approach to the theory of the elastic behaviour of multiphase materials. Journal of the Mechanics and Physics of Solids. 11, 127-140.
76. Hashin, Z. (1983) Analysis of composite materials: a survey. ASME Journal of Applied Mechanics. 50, 481-505.
77. Hazanov, S. and Huet, C. (1994). Order relationships for boundary conditions effect in heterogeneous bodies smaller than the representative volume. Journal of the Mechanics and Physics of Solids. 42, 1995-2011.
78. Hazanov, S. and Amieur, M. (1995). On overall properties of elastic heterogeneous bodies smaller than the representative volume. International Journal of Engineering Science. 33(9), 1289-1301.
79. Hill, R. (1952). The elastic behaviour of a crystalline aggregate. Proceedings of the Physical Society (London) A65, 349-354.
80. Hill, R. (1965). A self consistent mechanics of composite materials. Journal of the Mechanics and Physics of Solids. 13, 213-222
81. Hill, R. and Rice, J. R. (1973). Elastic potentials and the structure of inelastic constitutive laws. SIAM Journal of Applied Mathematics. 25, 448-461.
82. Hill, R. (1963). New derivations of some elastic extremum principles. In Progress in Applied Mechanics, Prager Anniversary Volume New York. pp. 91-106.
83. Hill, R. (1963). Elastic Properties of reinforced solids: some theoretical principles. Journal of the Mechanics and Physics of Solids. 11, 357-372.
84. Holland, J. H. (1975). Adaptation in natural and artificial systems. University of Michigan Press, Ann Arbor, Michigan.
85. Horst, R. and Tuy, H. (1996). Global optimization-deterministic approaches. Springer- Verlag.
86. Hsiao, S. W. and Kikuchi, N. (1997). Numerical analysis of deep drawing process for thermoplastic composite laminates. Journal of Engineering Materials and Technology, ASME Transactions. 119, 314-318.
87. Huet, C. (1981). Remarques sur l'assimilation d'un matériau hétérogéne á un milieu continu équivalent. In: C. Huet and A. Zaoui, (Eds.). Rheological behaviour and Structure of Materials. Presses ENPC, Paris. pp. 231-245.
88. Huet, C. (1982) Universal conditions for assimilation of a heterogeneous material to an effective medium. Mechanics Research Communications. 9(3), 165-170.
89. Huet, C. (1984). On the definition and experimental determination of effective constitutive equations for heterogeneous materials. Mechanics Research Communications. 11(3), 195-200.
90. Huet, C. (1987). Thermo-hygro-mechanical couplings in wood technology and Rheological Behaviours. In: H. D. Bui and Q. S. Nguyen, (Eds.). Thermomechanical couplings in solids, IUTAM symposium, Paris, 1986. North-Holland. pp. 163-182.
91. Huet, C. (1988). Modelizing the kinetics of the thermo-hygro-viscoelastic behavior of wood under constant climatic conditions. In: R. Itani, (Ed.). Proceedings of the 1988 International Conference on Timber Engineering, Seattle. pp. 395-401
92. Huet, C. (1990). Application of variational concepts to size effects in elastic heterogeneous bodies. Journal of the Mechanics and Physics of Solids. 38, 813-841.
93. Huet, C. (1991). Hierarchies and bounds for size effects in heterogeneous bodies. In: G. A. Maugin, (Ed). Continuum Models and Discrete Systems, Vol. 2, pp. 127-134.
94. Huet, C., Navi, P. and Roelfstra, P. E. (1991). A homogenization technique based on Hill's modification theorem. In Maugin, G.A. (Eds), Continuum Models and Discrete Systems, Longman, Harlow, Vol. 2, pp. 135-43.
95. Huet, C. (1995). Hybrid continuum thermodynamics framework and numerical simulations examples for the delayed micromechanical behavior of heterogeneous materials with chemical, climatic and defect sensitivity. In: Q. S. Nguyen and V. D. Nguyen, (Eds.). Engineering Mechanics Today. Proceedings of the International Conference Hanoi, University of Hanoi, pp. 170-184.
96. Huet, C., Guidoum, A. and Navi, P. (1995). A 3D micromechanical model for numerical analysis and prediction of long term deterioration in concrete. In: K. Sakai, N. Banthia, and O. E. Gjorv, (Eds.). Concrete Under Severe Conditions: Environment and Loading. Vol. 2, Spon, London, pp. 1458-1467.
97. Huet, C. (1996). Recent advances in the long term deformation and deterioration behavior of structural materials and components through the integrated micromechanics and Thermodynamics of Solids Approach. In: A. Gerdes, (Ed.). Advances in Building Materials. Aedificatio, Freiburg. pp. 161-196.
98. Huet, C. (1997). Activities 1989-1996. Laboratory for Building Materials. P. Navi and A. Tolou (Eds.). Department of Materials Report.
99. Huet C. (1997). An integrated micromechanics and statistical continuum thermodynamics approach for studying the fracture behaviour of microcracked heterogeneous materials with delayed response. Engineering Fracture Mechanics, Special Issue. 58(5-6), 459-556.
100. Huet, C. (1999). Coupled size and boundary condition effects in viscoelastic heterogeneous bodies. Mechanics of Materials. 31(12), 787-829.
101. Hughes, T. J. R. (1989). The finite element method. Prentice Hall.
102. Hyun, S. and Torquato, S. (2001). Designing material microstructures with target properties. Journal of Materials Research. 16, 280.
103. Jikov, V. V., Kozlov, S. M. and Olenik, O. A. (1994). Homogenization of differential operators and integral functionals. Springer-Verlag.
104. Kachanov, L. M. (1986). Introduction to continuum damage mechanics. Martinus Nijoff, Dordricht.
105. Kee, A., Matic, P. and Everett, R. K. (1998). A mesoscale computer simulation of multiaxial yield in gasar porous copper. Material Science and Engineering A249, 30-39.
106. Kelly, D. W., Gago, J. R., Zienkiewicz, O. C. and Babùska, I. (1983). A posteriori error analysis and adaptive processes in the finite element method. Part I-error analysis. The International Journal for Numerical Methods in Engineering. 19, 1593-1619.
107. Kennedy, J. and Eberhart, R. (2001). Swarm Intelligence. Morgan Kaufmann Publishers.
108. Kikuchi, N., Nishiwaki, S., Fonseca, J.O. and Silva, E. C. N. (1998). Design optimization method for compliant mechanisms and material microstructure. Computer Methods in Applied Mechanics and Engineering. 151, 401-417.
109. Kitchen, J. (1966). Concerning the convergence of iterates to fixed points. Studia Mathematica. 27, 247-249.
110. Krajcinovic, D. (1996). Damage mechanics. North Holland.
111. Kröner, E. (1972). Statistical continuum mechanics. CISM Lecture Notes. 92, Springer- Verlag.
112. Ladeveze, P. and Leguillon, D. (1983). Error estimate procedure in the finite element method and applications. SIAM Journal of Numerical Analysis 20, 485-509.
113. Ladeveze, P. and Dureisseix, D. (2000). A micro/macro approach for parallel computing of heterogeneous structures. International Journal for Computational Civil and Structural Engineering. 1(1), 18-28.
114. Ladeveze, P. (1998). A modelling error estimator for dynamic structural model updating. Advances in Adaptive Computational Methods in Mechanics. P. Ladeveze and J. T. Oden, Elsevier, pp. 135-151. Proceedings of the Workshop on New Advances in Adaptive Computational Methods in Mechanics, Cachan, 1997.
115. Ladeveze, P. and Dureisseix, D. (1999). Une nouvelle stratégie de calcul micro/macro en mécanique des strutures. C.R.A.S. Série IIb 327, 1237-1244.
116. Lee, K., Moorthy, S. and Ghosh, S. (1999). Multiple scale computational model for damage in composite materials, Effective properties of composite materials with periodic microstructure: a computational approach. Computer Methods in Applied Mechanics and Engineering. 172, 175-201.
117. Lemaitre, J. (1985). Coupled elasto-plasticity and damage constitutive equations. Computer Methods in Applied Mechanics and Engineering. 51, 31-49.
118. Lemaitre, J. and Chaboche, J.-L. (1990) Mechanics of solid materials. Cambridge University Press, Cambridge.
119. Le Tallec, P. (1994). Domain decomposition methods in computational mechanics. Computational Mechanics Advances. 1, 121-220.
120. Le Tallec, P. and Mouro, J. (2001). Fluid structure interaction with large structural displacements. ComputerMethods in AppliedMechanics and Engineering. 190(24-25), 3039-3067.
121. Lewis, R. W., Schrefler, B. A. and Simoni, L. (1992). Coupling versus uncoupling in soil consolidation. International Journal for Numerical and Analytical Methods in Geomechanics. 15, 533-548.
122. Lewis, R.W. and Schrefler, B. A. (1998). The finite element method in the static and dynamic deformation and consolidation of porous media. 2nd edition. Wiley press.
123. Li, M., Ghosh, S. and Richmond, O. (1999). An experimental-computational approach to the investigation of damage evolution in discontinuously reinforced aluminum matrix composite. Acta mater. 47(12) 3515-3532.
124. Liu, H. W. (1970). Stress corrosion cracking and the interaction between crack-tip stressfield and solute atoms. Journal of Basic Engineering ASME. 92D, 633-638.
125. Llorca, J. (2000). Void formation in Metal Matrix Composites. Comprehensive Composite Materials. Vol. 3, Metal Matrix Composites. (T. W. Clyne, Ed.), Pergamon, Amsterdam, pp. 91-115159.
126. Llorca, J., Elices, M., and Termonia, Y. (2000). Elastic properties of sphere-reinforced composites with a mesophase. Acta Materialia. 48, 4589-4597.
127. Llorca, J. and González, C. (1998). Microstructural factors controlling the strength and ductility of particle-reinforced metal-matrix composites. Journal of the Mechanics and Physics of Solids. 46, 1-28.
128. Llorca, J. (1994). A numerical stydy of the mechanisms of cyclic strain hardening in metalceramic composites. Acta Metallurgica et Materialia. 42, 151-162.
129. Llorca, J., Needleman, A. and Suresh, S. (1991). An analysis of the effects of matrix void growth on deformation and ductility in metal-ceramic composites. Acta Metallurgica et Materialia. 39, 2317-2335.
130. Lubliner, J. (1990). Plasticity theory. Macmillan Publishers.
131. Luenberger, D. (1974). Introduction to linear and nonlinear programming. Addison-Wesley, Menlo Park.
132. Miner, M. A. (1945). Cumulative damage in fatigue. Journal of Applied Mechanics. 12, 159-164.
133. Malvern, L. (1968). Introduction to the mechanics of a continuous medium. Prentice Hall.
134. Markenscoff, X. (2001). Diffusion induced instability. Quarterly of Applied Mechanics. 59(1), 147-151.
135. Markenscoff, X. (2001). Instabilities of a thermo-mechano-chemical system. Quarterly of Applied Mechanics. 59(3), 471-477.
136. Markenscoff, X. (2003). On conditions of "negative creep" in amorphous solids. Mechanics of Materials. 35(3-6), 553-557.
137. Marsden, J. E. and Hughes, T. J. R. (1983). Mathematical foundations of elasticity. Prentice Hall.
138. Maxwell, J. C. (1867). On the dynamical theory of gases. Philosophical Transactions of the Royal Society of London. 157, 49.
139. Maxwell, J. C. (1873). A treatise on electricity and magnetism. 3rd. edition. Clarendon Press, Oxford.
140. Metals Handbook. (1975). Failure Analysis and Prevention. 8, The American Society for Metals.
141. Meyers, M. A., Yu, L. H. and Vecchio, K. S. (1994). Shock synthesis in silicides-ii. Thermodynamics and kinetics. Acta Metallurgica Materialia. 42(3), 715-729.
142. Meyers, M. A. (1994). Dynamic behavior of materials. John-Wiley.
143. Michaud, V. (1992). Liquid state processing. In: S. Suresh, A.Mortensen and A. Needleman, (Eds.). Fundamentals of Metal Matrix Composites.
144. Michel, J. C., Moulinec, H. and Suquet, P. (1999). Effective properties of composite materials with periodic microstructure: a computational approach. Computer Methods in Applied Mechanics and Engineering. 172, 109-143.
145. Moes, N., Oden, J. T. and Zohdi, T. I. (1998). Investigation of the interaction of numerical error and modeling error in the Homogenized Dirichlet Projection Method. Computer Methods in Applied Mechanics and Engineering. 159, 79-101.
146. Moorthy, S. and Ghosh, S. (2000). Adaptivity and convergence in the Voronoi cell finite element model for analyzing heterogeneous materials. Computer Methods in Applied Mechanics and Engineering. 185, 37-74.
147. Moulinec, H. and Suquet, P. (1998). A numerical method for computing the overall response of nonlinear composites with complex microstructure. Computer Methods in Applied Mechanics and Engineering. 157, 69-94.
148. Mori, T. and Tanaka, K. (1973) Average stress in matrix and average energy of materials with misfitting inclusions. Acta. Metall. 21, 571-574.
149. Moorthy, S. and Ghosh, S. (2000). Adaptivity and convergence in the Voronoi cell finite element model for analyzing heterogeneous materials. Computer Methods in Applied Mechanics and Engineering. 185, 37-74.
150. Mura, T. (1993). Micromechanics of defects in solids, 2nd edition. Kluwer Academic Publishers.
151. Nemat-Nasser, S. and Hori, M. (1999). Micromechanics: overall properties of heterogeneous solids. 2nd edition. Elsevier, Amsterdam.
152. Nesterenko, V. F. (2001). Dynamics of heterogeneous materials. Springer-Verlag.
153. Nesterenko, V. F., Meyers, M. A., Chen, H. C. and LaSalvia, J. C. (1994). Controlled high rate localized shear in porous reactive media. Applied Physics Letters. 65(24), 3069-3071.
154. Nye, J. (1984). Physical properties of crystals. Oxford science publications.
155. Oden J. T. and Carey, G. F. (1984). Finite elements: mathematical aspects. Prentice-hall.
156. Oden, J. T. and Zohdi, T. I. (1997). Analysis and adaptive modeling of highly heterogeneous elastic structures. ComputerMethods in AppliedMechanics and Engineering. 148, 367-391.
157. Oden, J. T. and Vemaganti, K. (1999). Adaptive hierarchical modeling of heterogeneous structures. Physica D. 133, 404-415.
158. Oden, J. T., Vemaganti, K. and Moes, N. (1999). Hierarchical modeling of heterogeneous solids. Computer Methods in Applied Mechanics and Engineering. 172, (1-27).
159. Ogden, R. W. (1999). Nonlinear elasticity. Dover reissue.
160. Onwubiko, C. (2000). Introduction to engineering design optimization. Prentice Hall.
161. Orowan, E. (1944). Proceedings if the Institution of Mechanical Engineers. 151, 133 (discussion of paper by H. O'Neill).
162. Ortega, J. and Rockoff, M. (1966). Nonlinear difference equations and Gauss-Seidel type iterative methods. SIAM. Journal on Numerical Analysis 3, 497-513.
163. Ortiz, M. and Pandolfi, A. (1999). Finite deformation irreversible cohesive elements for three-dimensional crack-propagation analysis. The International Journal of Numerical Methods in Engineering. 44, 1267-1282.
164. Ostrowski, A. (1957). Les points d' attraction et de r'epulsion pour l'it'eration dans l'espace a' n dimensions. C. R. Acad. Sci. Paris. 244, 288-289.
165. Ostrowski, A. (1966). Solution of equations and systems of equations. Academic Press, New York
166. Palmgren, A. (1924). Die Lebensdauer von Kugellagern. Zeitschrift des Vereins Deutscher Ingenieure. 68, 339-341.
167. Park, K. C. and Felippa, C. A. (1983). Partitioned analysis of coupled systems. In: T. Belytschko and T. J. R. Hughes, (Eds.). Computational Methods for Transient Analysis.
168. Perron, O. (1929). Über Stabilität und asyptotisches Verhalten der Lösungen eines Systems endlicher Differenzengleichungen. J. Reine Angew. Math. 161, 41-64.
169. Piperno, S. (1997). Explicit/implicit fluid/structure staggered procedures with a structural predictor and fluid subcycling for 2D inviscid aeroelastic simulations. International Journal for Numerical Methods in Fluids. 25, 1207-1226.
170. Poza, P. and Llorca, J. (1999). Mechanical Behaviour of Al-Li/SiC composites. Part III: Micromechanical modeling. Metallurgical and Materials Transactions 30A, 869-878.
171. Raghavan, P., Moorthy, S., Ghosh, S. and Pagano, N. J. (2001). Revisiting the composite laminate problem with an adaptive multi-level computational model. Composites Science and Technology. 61, 1017-1040.
172. Rayleigh, J. W. (1892). On the influence of obstacles arranged in rectangular order upon properties of a medium. Philosophical Magazine 32, 481-491.
173. Reuss, A. (1929). Berechnung der Fliessgrenze von Mischkristallen auf Grund der Plastizit ätsbedingung für Einkristalle. Z. angew. Math. Mech. 9, 49-58.
174. Schmidt, L. (1998). The engineering of chemical reactions, Oxford University Press.
175. Schrefler, B. A. (1985). A partitioned solution procedure for geothermal reservoir analysis. Communications in Applied Numerical Methods 1, 53-56.
176. Segurado, J. and Llorca, J. (2002). A numerical approximation to the elastic properties of sphere-reinforced composites. Journal of the Mechanics and Physics of Solids, 50.
177. Segurado, J., Llorca, J. and González, C. (2002). On the accuracy of mean-field approaches to simulate the plastic deformation of composites. Scripta Materialia. 46, 525-529.
178. Shackelford, J. (1996). Introduction to materials science for engineers, 4th edition, Macmillan Publishers.
179. Silva, E. C. N., Fonseca, J. S. O. and Kikuchi, N. (1997). Optimal design of piezoelectric microstructures. Computational Mechanics. 19, 397-410.
180. Silva, E. C. N., Fonseca, J. S. O. and Kikuchi, N. (1998). Optimal design of periodic piezocomposites. Computer Methods in Applied Mechanics and Engineering. 159, 49-77.
181. Sigmund, O. (2000). Topology optimization: A tool for the tailoring of structures and materials. A special issue of the philosophical. Transactions of the Royal Society: Science into the next Millennium (Issue III, Mathematics, Physics and Engineering). 358(1765), 211-228.
182. Sigmund, O. (2000). A new Class of Extremal Composites. Journal of the Mechanics and Physics of Solids. 48(2), 397-428.
183. Sigmund, O. and Torquato, S. (1999). Design of smart composite materials using topology optimization. Smart Materials and Structures. 8, pp. 365-379.
184. Sigmund, O. and Torquato, S. (1996). Composites with extremal thermal expansion coefficients. Applied Physics Letters. 69(21): 3203-3205.
185. Sigmund, O. (1995). Tailoring materials with prescribed elastic properties. Mechanics of Materials. 20, 351-368.
186. Sigmund, O. and Torquato, S. (1999). Design of smart composite materials using topology optimization. Smart Materials and Structures. 8, 365.
187. Sigmund, O., Torquato, S. and Aksay, I. A. (1998). On the optimization of 1-3 piezocomposites using topology optimization. Journal of Materials Research. 14, 1038.
188. Sigmund, O. (2001). Design of multiphysics actuators using topology optimization - Part I: One-material structures. Computer Methods in Applied Mechanics and Engineering. 190(49-50), 6577-6604.
189. Sigmund, O. (2001). Design of multiphysics actuators using topology optimization - Part II: Two-material structures. Computer Methods in Applied Mechanics and Engineering 190(49-50), 6605-6627.
190. Simo, J. C. and Hughes, T. J. R (1998). Computational inelasticity. Springer-Verlag.
191. Simo, J. C. and Ortiz, M. (1985). A unified approach to finite deformation elastoplastic analysis based on the use of hyperelastic constitutive laws. Computer Methods in Applied Mechanics and Engineering. 49, 221-245.
192. Simo, J. C. (1988). A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition: Part 1. Continuum formulation. Computer Methods in Applied Mechanics and Engineering. 66, 199-219.
193. Southwell, R. V. (1940). Relaxation methods in engineering science. Oxford University Press.
194. Southwell, R. V. (1946). Relaxation methods in theoretical physics. Oxford University Press.
195. Suresh, S., Mortensen, A. and Needleman, A. (1993). Fundamentals of metal matrix composites. Butterworth-Heineman publishers.
196. Szabo, B. and Babúska, I. (1991). Finite element analysis. Wiley Interscience.
197. Terada, K. and Kikuchi, N. (1996). Microstructural design of composites using the homogenization method and digital images. Materials Science Research International. 2(2), 65-72.
198. Terada, K., and Kikuchi, N. (1996). Global-local constitutive modeling of composite materials by the homogenization method. Materials Science Research International. 2(2), 73-80.
199. Terada, K., Hori, M., Kyoya, T. and Kikuchi, N. (2000). Simulation of the multi-scale convergence in computational homogenization approaches. The International Journal of Solids and Structures. 37, 2229-2361.
200. Thadhani, N. N. (1993). Shock-induced chemical reactions and synthesis of materials. Progress in material science. 37, 117-226.
201. Torquato, S. (1991). Random heterogeneous media: microstructure and improved bounds on effective properties. Applied Mechnics Reviews 44, 37-76.
202. Torquato, S. (1997). Effective stiffness tensor of composite media I. Exact series expansions. Journal of the Mechanics and Physics of Solids. 45, 1421-1448.
203. Torquato, S. (1998). Effective stiffness tensor of composite media II. Applications to isotropic dispersions. Journal of the Mechanics and Physics of Solids. 46, 1411-1440.
204. Torquato, S. (2002). Random heterogeneous materials: Microstructure and macroscopic properties. Springer-Verlag, New York.
205. Torquato, S. and Hyun, S. (2001). Effective-medium approximation for composite media: Realizable single-scale dispersions. Journal of Applied Physics 89, 1725-1729.
206. Truesdell, C. and Noll, W. (1992). The nonlinear field theories. Springer-Verlag.
207. Van Vlack, L. H. (1966). Elements of materials science. Addison-Wesley.
208. Vecchio, K. S. and Meyers, M. A. (1994). Shock synthesis in silicides-i. Experimentation and microstructural evolution, Acta Metallurgica Materialia. 42(3), 701-714.
209. Vemaganti, K. S. and Oden, J. T. (2001). Estimation of local modeling error and goaloriented adaptive modeling of heterogeneous materials. Computer Methods in Applied Mechanics and Engineering. 190, 46-47, 6089-6124.
210. Vigdergauz, S. (2001). Genetic algorithm perpective to identify energy optimizing inclusions in an elastic plate. The International Journal of Solids and Structures. 38, 6851-6867.
211. Vigdergauz, S. (2001). The effective properties of a perforated elastic plate: numerical optimization by genetic algorithm. The International Journal of Solids and Structures. 38, 8593-8616.
212. Voigt, W. (1889). Über die Beziehung zwischen den beiden Elastizitätskonstanten isotroper Körper. Wied. Ann. 38, 573-587.
213. Wentorf, R., Collar, R., Shephard, M. S. and Fish, J. (1999). Automated modeling for complex woven mesostructures. Computer Methods in Applied Mechanics and Engineering. 172, 273-291.
214. Wriggers, P. (2001). Nichtlineare Finite-Element-Methoden. Springer-Verlag.
215. Wriggers, P., Zavarise, G. and Zohdi, T. I. (1998). A computational study of interfacial debonding damage in fibrous composite materials. Computational Materials Science. 12, 39-56.
216. Wriggers, P. (2002). Computational contact mechanics. John-Wiley.
217. Young D. M. (1950). Iterative methods for solving partial difference equations of elliptic type. Doctoral thesis. Harvard University.
218. Zhang, J., Lin, Z., Wong, A., Kikuchi, N., Li, V. C., Yee, A. F. and Nusholtz, G. S. (1997). Constitutive modeling and material characterization of polymetric foams. Journal of Engineering Materials and Technology, ASME Transactions. 119, 279-283.
219. Zhigljavsky, A. A. (1991). Theory of global random search. Kluwer
220. Zienkiewicz, O. C. and Taylor R. L. (1991). The finite element method. Vols. I and II. McGraw-Hill.
221. Zienkiewicz, O. C. (1984). Coupled problems and their numerical solution. In: R.W. Lewis, P. Bettess and E. Hinton, (Eds.). Numerical methods in coupled systems. Wiley, Chichester. pp. 35-58.
222. Zienkiewicz, O. C. and Zhu, J. Z. (1987). A simple error estimator and adaptive procedure for practical engineering analysis. The International Journal for Numerical Methods in Engineering. 24, 337-357.
223. Zohdi, T. I., Oden, J. T. and Rodin, G. J. (1996). Hierarchical modeling of heterogeneous bodies. Computer Methods in Applied Mechanics and Engineering. 138, 273-298.
224. Zohdi, T. I., Feucht, M., Gross, D. and Wriggers, P. (1998). A description of macroscopic damage via microstructural relaxation. The International Journal of Numerical Methods in Engineering. 43, 493-507.
225. Zohdi, T. I. and Wriggers, P. (1999). A domain decomposition method for bodies with microstructure based upon material regularization. The International Journal of Solids and Structures. 36(17) 2507-2526.
226. Zohdi, T. I., Hutter, K. and Wriggers, P. (1999). A technique to describe the macroscopic pressure dependence of diffusive properties of solid materials containing heterogeneities. Computational Materials Science. 15, 69-88.
227. Zohdi, T. I. and Wriggers, P. (1999). On the effects of microstress on macroscopic diffusion processes. Acta Mechanica. 136(1-2), 91-107.
228. Zohdi, T. I. and Wriggers, P. (2000). A computational model for interfacial damage through microstructural cohesive zone relaxation. The International Journal of Fracture. 101(3), L9-L14.
229. Zohdi, T. I. and Wriggers, P. (2000). On the sensitivity of homogenized material responses at infinitesimal and finite strains. Communications in Numerical Methods in Engineering. 16, 657-670.
230. Zohdi, T. I. (2000). Overall solution-difference bounds on the effects of material inhomogeneities. The Journal of Elasticity. 58(3), 249-255.
231. Zohdi, T. I. (2000). Some remarks on hydrogen trapping, The International Journal of Fracture, 106(2), L9-L14.
232. Zohdi, T. I. and Wriggers, P. (2001). A model for simulating the deterioration of structuralscale material responses of microheterogeneous solids. Computer Methods in Applied Mechanics and Engineering. 190(22-23), 2803-2823.
233. Zohdi, T. I. and Wriggers, P. (2001). Aspects of the computational testing of the mechanical properties of microheterogeneous material samples. The International Journal of Numerical Methods in Engineering. 50, 2573-2599.
234. Zohdi, T. I. and Wriggers, P. (2001). Modeling and simulation of the decohesion of particulate aggregates in a binding matrix. Engineering Computations. 18(1-2), 79-95.
235. Zohdi, T. I. and Wriggers, P. (2001). Computational micro-macro material testing. Archives of Computational Methods in Engineering. 8(2), 131-228.
236. Zohdi, T. I., Wriggers, P. and Huet, C. (2001). A method of substructuring large-scale computational micromechanical problems. Computer Methods in Applied Mechanics and Engineering. 190(43-44), 5639-5656.
237. Zohdi, T. I. (2001). Computational optimization of vortex manufacturing of advanced materials. Computer Methods in Applied Mechanics and Engineering. 190(46-47), 6231-6256.
238. Zohdi, T. I. (2002). An adaptive-recursive staggering strategy for simulating multifield coupled processes in microheterogeneous solids. The International Journal of Numerical Methods in Engineering. 53, 1511-1532.
239. Zohdi, T. I. (2001). On the propagation of microscale material uncertainty in a class of hyperelastic finite deformation stored energy functions. The International Journal of Fracture. 112(2), 13-17.
240. Zohdi, T. I. (2002). Incorporation of microfield distortion into rapid effective property design. Mathematics and Mechanics of Solids. 7(3), 237-254.
241. Zohdi, T. I. (2002). On the tailoring of microstructures for prescribed effective properties. The International Journal of Fracture. 114(3), 15-20.
242. Zohdi, T. I., Kachanov, M. and Sevostianov, I. (2002). On perfectly-plastic flow in porous material. The International Journal of Plasticity. 18, 1649-1659.
243. Zohdi, T. I. (2002). An adaptive-recursive staggering strategy for simulating multifield coupled processes in microheterogeneous solids. The International Journal of Numerical Methods in Engineering. 53, 1511-1532.
244. Zohdi, T. I., Monteiro, P. J. M. and Lamour, V. (2002). The International Journal of Fracture. Extraction of elastic moduli from granular compacts. 115(3), 49-54.
245. Zohdi, T. I. (2002). Bounding envelopes in multiphase material design. The Journal of Elasticity. 66, 47-62.
246. Zohdi, T. I. (2003). Large-scale statistical inverse computation of inelastic accretion in transient granular flows. The International Journal of Nonlinear Mechanics. 8, 1205-1219.
247. Zohdi, T. I. (2003). Compaction of cohesive hyperelastic granules at finite strains. June Issue of the Proceedings of the Royal Society.
248. Zohdi, T. I. (2003). Constrained inverse formulations in random material design. Computer Methods in Applied Mechanics and Engineering. 192, 28-30, 18, 3179-3194.
249. Zohdi, T. I. (2003). Genetic optimization of statistically uncertain microheterogeneous solids. Philosophical Transactions of the Royal Society: Mathematical, Physical and Engineering Sciences. 361(1806), 1021-1043.
250. Zohdi, T. I. (2004). Staggering error control for a class of inelastic processes in random microheterogeneous solids. The International Journal of Nonlinear Mechanics. Issue 39, 281-297.
251. Zohdi, T. I. (2004). Modeling and simulation of a class of coupled thermo-chemomechanical processes in multiphase solids. Computer Methods in Applied Mechanics and Engineering. 193(6-8), 679-699.
252. Zohdi, T. I. (2005). Statistical ensemble error bounds for homogenized microheterogeneous solids. Journal of Applied Mathematics and Physics. (Zeitschrift für Angewandte Mathematik und Physik). 56(3), 497-515.