Computational Micro-macro Material Testing

Archives of Computational Methods in Engineering

Volumn 8, Issue 2, 2001, Pages 131-228

  Zohdi, T I ^a   Wriggers, P ^a  

^a LEIBNIZ UNIVERSITY HANNOVER   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0035596290     PISSN: 11343060     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02897871     Document Type: Article

References (101)

1. Aboudi, J. (1992), Mechanics of composite materials-a unified micromechanical approach, Elsevier, 29.
2. Ainsworth, M. and Oden, J.T. (2000), A posterori error estimation in finite element analysis, John-Wiley.
3. Allix, O. Ladevéze, P. and Corigliano, A. (1994), Damage analysis of interlaminar fracture specimens. Composites Structures, 31, 61-74.
4. Ames, W.F. (1977), Numerical methods for partial differential equations, 2nd edition, Academic Press.
5. Amieur, M., Hazanov, S. and Huet, C. (1993), "Numerical and experimental study of size and boundary conditions effects on the apparent properties of specimens not having the representative volume", In Micromechanics of Concrete and Cementitious Composite, C. Huet (Ed.).
6. Amieur, M. (1994), "Etude numérique et expérimentale des effets d'échelle et de conditions aux limites sur des éprouvettes de béton n'ayant pas le volume représentatif", Doctoral dissertation No 1256, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland.
7. Amieur, M., Hazanov, S. and Huet, C. (1995), "Numerical and experimental assessment of the size and boundary conditions effects for the overall properties of granular composite bodies smaller than the representative volume", In IUTAM Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics, D.F. Parker and A.H. England (Eds.), Kluwer Academic Publishers, 149-154, The Netherlands.
8. Axelsson, O. (1994), Iterative solution methods, Cambridge University Press.
9. Ball, J.M. (1977), "Convexity conditions and existence theorems in nonlinear elasticity", Arch. Rational Mech. Anal., 63, 337-403.
10. Bolzon, G. and Corigliano, A. (1997), "A discrete formulation for elastic solids with damaging interfaces", Computer Methods in Applied Mechanics and Engineering, 140, 329-359.
11. Bonet, J. and Wood, R.D. (1997), Nonlinear continuum mechanics for finite element analysis, Cambridge University Press.
12. Briggs, W. (1987), A multigrid tutorial, Siam Issue.
13. Budiansky, B. (1965), "On the elastic moduli of some heterogeneous materials", Journal of the Mechanics and Physics of Solids, 13, 223-227.
14. Carol, I., Rizzi, E. and Willam, K. (1994), "A unified theory of elastic degradation and damage based on a loading surface", The International Journal of Solids and Structures, 31, No. 20, 2835-2865.
15. Chandrasekharaiah, D.S. and Debnath, L. (1994), Continuum mechanics, Academic press.
16. Cherkaev, A.V. and Gibiansky, L.V. (1992), "The exact coupled bounds for effective tensors of electrical and magnetic properties of two-component two-dimensional composites", Proc. of Royal Soc. of Edinburgh, 122A, 93-125.
17. Christensen, R. (1990), "A critical evaluation for a class of micromechanics models", Journal of the Mechanics and Physics of Solids, 38, No. 3, 379-404.
18. Ciarlet, P.G. (1993), Mathematical Elasticity, Elsevier.
19. Corigliano, A. (1993), "Formulation, identification and use of interface models in the numerical analysis of composite delamination", The International Journal of Solids and Structures, 30, 2779-2811.
20. Courant, R. (1943), "Variational methods for the solution of problems of equilibrium and vibration", Bull. Am. Math. Soc., 49, 1-23.
21. Crank, J.(1975), The Mathematics of Diffusion, 2nd edition, Oxford Science Publications.
22. da Silva, M.G. and Ramesh, K.T. (1997), "The rate-dependent deformation and localization of fully dense and porous Ti - 6Al - 4V", Mater. Sci. Eng., A232, 11-22.
23. Davidon, W.C. (1959), "Variable metric method for minimization", Research and development report. ANL-5990 (Ref.), U.S. Atomic Energy Commision, Argonne National Laboratories.
24. Drucker, D.C. (1959), "A definition of a stable inelastic material", J. Appl. Mech., 26, 101-106.
25. Eshelby, J.D. (1957), "The elastic field of an ellipsoidal inclusion, and related problems", Proc. Roy. Soc., A241, 376-396.
26. Eustathopoulos, N. and Mortensen, A. (1993), "Capillary phenomena, interfacial bonding and reactivity", In Fundamentals of metal matrix composites, Suresh, S., Mortensen, A. and Needleman, A. (Eds.), Butterworth-Heineman publishers.
27. Frankel, S.P. (1950), "Convergence rates of iterative treatments of partial differential equations", Math. Tables Aids Comp., 4, 65-75.
28. Gibson, L. and Ashby, M. (1997), Cellular solids. Structure and properties, 2nd edition, Cambridge.
29. Hashin, Z. and Shtrikman, S. (1962), "On some variational principles in anisotropic and nonhomogeneous elasticity", Journal of the Mechanics and Physics of Solids, 10, 335-342.
30. Hashin, Z. and Shtrikman, S. (1963), "A variational approach to the theory of the elastic behaviour of multiphase materials", Journal of the Mechanics and Physics of Solids, 11, 127-140.
31. Hashin, Z. (1983), "Analysis of composite materials: a survey", ASME Journal of Applied Mechanics, 50, 481-505.
32. Hazanov, S. and Huet, C. (1994), "Order relationships for boundary conditions effect in heterogeneous bodies smaller than the representative volume", Journal of the Mechanics and Physics of Solids, 42, 1995-2011.
33. Hazanov, S. and Amieur, M. (1995), "On overall properties of elastic heterogeneous bodies smaller than the representative volume", Int. J. Eng. Science, 33, 9, 1289-1301.
34. Hill, R. (1952), "The Elastic Behaviour of a Crystalline Aggregate", Proc. Phys. Soc. (Lond.), A65, 349-354.
35. Hill, R. (1965), "A self consistent mechanics of composite materials", Journal of the Mechanics and Physics of Solids, 13, 213-222.
36. Hill, R. (1963), "Elastic Properties of reinforced solids: some theoretical principles", Journal of the Mechanics and Physics of Solids, 11, 357-372.
37. Huet, C. (1981), "Remarques sur l'assimilation d'un matériau hétérogène à un milieu continu équivalent", In C. Huet and A. Zaoui (Eds.), Rheological behaviour and Structure of Materials, 231-245, Presses ENPC, Paris.
38. Huet, C. (1982), "Universal conditions for assimilation of a heterogeneous material to an effective medium", Mechanics Research Communications, 9 (3), 165-170.
39. Huet, C. (1984), "On the definition and experimental determination of effective constitutive equations for heterogeneous materials", Mechanics Research Communications, 11 (3), 195-200.
40. Huet, C. (1990), "Application of variational concepts to size effects in elastic heterogeneous bodies", Journal of the Mechanics and Physics of Solids, 38, 813-841.
41. Huet, C. (1991), "Hierarchies and bounds for size effects in heterogeneous bodies", In Continuum Models and discrete systems, G.A. Maugin (Ed.), Vol. 2, 127-134.
42. Huet, C., Navi, P. and Roelfstra, P.E. (1991), "A homogenization technique based on Hill's modification theorem", In Continuum models and discrete systems.
43. Huet, C. (1997), Activities 1989-1996. Laboratory for Building Materials. P. Navi and A. Tolou (Eds.), Department of Materials Report.
44. Huet, C. (1997), "An integrated micromechanics and statistical continuum thermodynamics approach for studying the fracture behaviour of microcracked heterogeneous materials with delayed response", Engineering Fracture Mechanics, Special Issue, 58, 5-6, 459-556.
45. Huet, C. (1999), "Coupled size and boundary condition effects in viscoelastic heterogeneous bodies", Mechanics of Materials, 31, 12, 787-829.
46. Hughes, T.J.R. (1989), The finite element method, Prentice Hall.
47. Jikov, V.V., Kozlov, S.M. and Olenik, O.A. (1994), Homogenization of differential operators and integral functionals, Springer-Verlag.
48. Ju, J.W. (1989), "On energy-based coupled elastoplastic damage theories: constitutive modeling and computational aspects", The International Journal of Solids and Structures, 25, 803-833.
49. Kachanov, L.M. (1986), Introduction to continuum damage mechanics, Martinus Nijoff, Dordricht.
50. Kitchen, J. (1966), "Concerning the convergence of iterates to fixed points", Studia Math., 27, 247-249.
51. Krajcinovic, D. (1996), Damage Mechanics, North Holland.
52. Kröner, E. (1972), Statistical Continuum Mechanics, CISM Lecture Notes, 92, Springer-Verlag.
53. Ladeveze, P. and Leguillon, D. (1983), "Error Estimate Procedure in the Finite Element Method and Applications", SIAM J. Numerical Anal., 20, 485-509.
54. Ladaveze, P., Gasser, A. and Allix, O. (1994), "Damage modeling for ceramic composites", J. of Engineering Mat. and Tech., 116, 331-336.
55. Lemaitre, J. (1985), "Coupled elasto-plasticity and damage constitutive equations", Computer Methods in Applied Mechanics and Engineering, 51, 31-49.
56. Lemaitre, J. and Chaboche, J.-L. (1990), Mechanics of solid materials, Cambridge Univ. Press, Cambridge.
57. Le Tallec, P. (1994), "Domain Decomposition Methods in Computational Mechanics", Computational Mechanics Advances, 1, 121-220.
58. Maxwell, J.C. (1867), "On the dynamical theory of gases", Philos. Trans. Soc. London, 157, 49.
59. Maxwell, J.C. (1873), A treatise on electricity and magnetism, 3rd. Ed., Clarendon Press, Oxford.
60. Metals Handbook (1975), Failure Analysis and Prevention, 8, The American Society for Metals.
61. Michaud, V. (1992), "Liquid state processing", In Fundamentals of metal matrix composites Suresh, S., Mortensen, A. and Needleman, A. (Eds.).
62. Mori, T. and Tanaka, K. (1973), "Average stress in matrix and average energy of materials with misfitting inclusions", Acta. Metall., 21, 571-574.
63. Mura, T. (1993), Micromechanics of defects in solids, 2nd Edition, Kluwer Academic Publishers.
64. Needleman, A. (1987), "A continuum model for void nucleation by inclusion debonding", J. Appl. Mech., 54, 525-531.
65. Needleman, A. (1990), "An analysis of decohesion along an imperfect interface", Int. J. Fracture, 42, 21-40.
66. Needleman, A. (1990), "An analysis of tensile decohesion along an interface", Journal of the Mechanics and Physics of Solids, 38, 289-324.
67. Needleman, A. (1992), "Micromechanical modeling of interfacial decohesion", Ultramicroscopy, 40, 203-214.
68. Needleman, A., Nutt, S., Suresh, S. and Tvergaard, V. (1993), "Matrix reinforcement, and interfacial failure", In Fundamentals of metal matrix composites, Suresh, S., Mortensen, A. and Needleman, A. (Eds.), Butterworth-Heineman publishers.
69. Nemat-Nasser, S. and Hori, M. (1999), Micromechanics: overall properties of heterogeneous solids, 2nd Edition, Elsevier, Amsterdam.
70. Oden, J.T. and Zohdi, T.I. (1997), "Analysis and adaptive modeling of highly heterogeneous elastic structures", Computer Methods in Applied Mechanics and Engineering, 148, 367-391.
71. Ogden, R.W. (1999), Nonlinear Elasticity, Dover reissue.
72. Orowan, E. (1944), Proc. Instn. Mech. Engrs., 151, 133, (discussion of paper by H. O'Neill).
73. Ortega, J. and Rockoff, M. (1966), "Nonlinear difference equations and Gauss-Seidel type iterative methods" SIAM J. Numer. Anal., 3, 497-513.
74. Ortiz, M. and Pandolfi. A. (1999), "Finite deformation irreversible cohesive elements for three-dimensional crack-propagation analysis", The International Journal of Numerical Methods in Engineering, 44, 1267-1282.
75. Ostrowski, A. (1957), "Les points d'attraction et de répulsion pour l'itération dans l'espace a' n dimensions", C. R. Acad. Sci. Paris, 244, 288-289.
76. Ostrowski, A. (1966), Solution of equations and systems of equations, Academic Press, New York.
77. Perron, O. (1929), "Über Stabilität und asyptotisches Verhalten der Lösungen eines Systems endlicher Differenzengleichungen", J. Reine Angew. Math., 161, 41-64.
78. Rayleigh, J.W. (1892), "On the influence of obstacles arranged in rectangular order upon properties of a medium.", Phil. Mag., 32, 481-491.
79. Reuss, A. (1929), "Berechnung der Fliessgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle", Z. angew. Math. Mech., 9, 49-58.
80. Ruiz, G., Ortiz, M. and Pandolfi, A. (2000), "Three-dimensional finite-element simulation of the dynamic Brazilian tests on concrete cylinders", The International Journal of Numerical Methods in Engineering, 48, 963-994.
81. Suresh, S., Mortensen, A. and Needleman, A. (1993), Fundamentals of metal matrix composites, Butterworth-Heineman publishers.
82. Szabo, B. and Babüska, I. (1991), Finite element analysis, Wiley Interscience.
83. Torquato, S. (1991), "Random heterogeneous media: microstructure and improved bounds on effective properties", Appl. Mech. Rev., 44, 37-76.
84. Torquato, S. and Lado, F. (1992), "Improved bounds on the effective elastic moduli of random arrays of cylinders", J. Appl. Mech., 59, 1-6.
85. Torquato, S. (1997), "Effective stiffness tensor of composite media I. Exact series expansions", Journal of the Mechanics and Physics of Solids, 45, 1421-1448.
86. Torquato, S. (1998), "Effective stiffness tensor of composite media I. Applications to isotropic dispersions", Journal of the Mechanics and Physics of Solids, 46, 1411-1440.
87. Voigt, W. (1889), "Über die Beziehung zwischen den beiden Elastizitätskonstanten isotroper Körper", Wied. Ann., 38, 573-587.
88. Wriggers, P. (2001), Nichtlineare Finite-Element-Methoden, Springer-Verlag.
89. Wriggers, P., Zavarise, G. and Zohdi, T.I. (1998), "A computational study of interfacial debonding damage in fibrous composite materials", Computational Materials Science, 12, 39-56.
90. Yazdani, S. and Schreyer, H.L. (1990), "Combined plasticity and damage mechanics model for plain concrete", ASCE J. of Eng. Mech., 116, No. 7, 1435-1450.
91. Zohdi, T.I., Oden, J.T. and Rodin, G.J. (1996), "Hierarchical modeling of heterogeneous bodies", Computer Methods in Applied Mechanics and Engineering, 138, 273-298.
92. Zohdi, T.I., Feucht, M., Gross, D. and Wriggers, P. (1998), "A description of macroscopic damage via microstructural relaxation", The International Journal of Numerical Methods in Engineering, 43, 493-507.
93. Zohdi, T.I. and Wriggers, P. (1999), "A domain decomposition method for bodies with microstructure based upon material regularization", The International Journal of Solids and Structures, 36, No. 17, 2507-2526.
94. Zohdi, T.I. and Wriggers, P. (1999), "On the effects of microstress on macroscopic diffusion processes", Acta Mechanica, 136, No 1-2, 91-107.
95. Zohdi, T.I. and Wriggers, P. (2000), "A computational model for interfacial damage through microstructural cohesive zone relaxation", The International Journal of Fracture, 101 No. 3, L9-L14.
96. Zohdi, T.I. and Wriggers, P. (2000), "On the sensitivity of homogenized material responses at infinitesimal and finite strains", Communications in Numerical Methods in Engineering, 16, 657-670.
97. Zohdi, T.I. and Wriggers, P. (2001), "Aspects of the computational testing of the mechanical properties of microheterogeneous material samples", The International Journal of Numerical Methods in Engineering, 50, 2573-2599.
98. Zohdi, T.I. and Wriggers, P. (2001), "A model for simulating the deterioration of structural-scale material responses of microheterogeneous solids", Computer Methods in Applied Mechanics and Engineering, 190, 22-23, 2803-2823.
99. Zohdi, T.I. and Wriggers, P. (2001), "Modeling and simulation of the decohesion of particulate aggregates in a binding matrix", Engineering Computations, 18, 1/2, 79-95.
100. Zohdi, T.I. (2000), "Overall solution-difference bounds on the effects of material inhomogeneities", The Journal of Elasticity, 58, (3), 249-255.
101. Zohdi, T.I., Wriggers, P. and Huet, C. (accepted), "A method of substructuring large-scale computational micromechanical problems", Computer Methods in Applied Mechanics and Engineering.