Thermal control of nanostructure and molecular network development in epoxy-amine thermosets

ACS Applied Materials and Interfaces

Volumn 4, Issue 2, 2012, Pages 564-572

  Sahagun, Christopher M ^a   Morgan, Sarah E ^a  

^a Virginia Polytechnic Institute and State University   (United States)

Author keywords

epoxy amine; nanoscale morphology; polymer fracture; thermoset polymer; time temperature transformation

Indexed keywords

EPOXY-AMINE; NANOSCALE MORPHOLOGY; POLYMER FRACTURE; THERMOSET POLYMER; TIME TEMPERATURE TRANSFORMATION;

ATOMIC FORCE MICROSCOPY; CROSSLINKING; FRACTURE; MECHANICAL PROPERTIES; MORPHOLOGY; NANOTECHNOLOGY; ORGANIC COMPOUNDS; POLYMER MATRIX COMPOSITES; POLYMERS; THERMODYNAMIC PROPERTIES; THERMOSETS;

EPOXY RESINS;

AMINE; EPOXY RESIN; NANOMATERIAL; POLYMER;

ARTICLE; CHEMISTRY; TEMPERATURE;

AMINES; EPOXY RESINS; NANOSTRUCTURES; POLYMERS; TEMPERATURE;

EID: 84857432135     PISSN: 19448244     EISSN: 19448252     Source Type: Journal    
DOI: 10.1021/am201515y     Document Type: Review

References (49)

1. Feng, J.; Berger, K.; Douglas, E. J. Mater. Sci. 2004, 39, 3413
2. Choi, S; Douglas, E. ACS Appl. Mater. Interfaces 2010, 2, 934
3. Haris, A; Adachi, T; Araki, W. Mater. Sci. Eng., A 2008, A496, 337
4. Yung, K; Zhu, B; Yue, T; Cie, C. J. Appl. Polym. Sci. 2010, 116, 518
5. Ellis, B; Found, M; Bell, J. J. Appl. Polym. Sci. 2001, 82, 1265
6. Lesser, A; Crawford, E. J. Appl. Polym. Sci. 1997, 66, 387
7. Ochi, M; Tsuyuno, N; Sakaga, K; Nakanishi, Y; Murata, Y. J. Appl. Polym. Sci. 1995, 56, 1161
8. Jackson, M; Kaushik, M; Nazarenko, S; Ward, S; Maskell, R; Wiggins, J. Polymer 2011, 52, 4528
9. Aspbury, P; Wake, W. Brit. Polym. J. 1979, 11, 17
10. Errath, E; Spurr, R. J. Polym. Sci. 1959, 35, 391
11. Gupta, V; Drzal, L; Adams, W; Omlor, R. J. Mater. Sci. 1985, 20, 3439
12. Takahama, T; Geil, P. Makromol. Chem. Rap. Comm. 1982, 3, 389
13. Racich, J; Koutsky, J. J. Appl. Polym. Sci. 1976, 20, 2111
14. Bogdanova, L; Belgovskii, I; Irzhak, V; Rosenberg, B. Polym. Bull. 1981, 4, 119
15. Kreibich, U; Schmid, R. J. Polym. Sci. 1975, 53, 177
16. Matyi, R; Uhlmann, D. J. Polym. Sci., Polym. Phys. Ed. 1980, 18, 1053
17. Duchet, J; Pascault, P. J. Polym. Sci., Part B: Polym. Phys. 2003, 41, 2422
18. Dusek, K; Plestil, J; Lednicky, F; Lunak, S. Polymer 1978, 19, 393
19. Gu, X; Nguyen, T; Ho, D; Oudina, M; Martin, D; Kidah, B; Jasmin, J; Rezig, A; Sung, L; Byrd, E; Jean, Y; Martin, J. J. Coat. Technol. Res. 2005, 2, 547
20. Gu, X; Sung, D; VanLandingham, M; Nguyen, T. Mater. Res. Soc. Symp. Proc. 2002, not supplied.
21. Kishi, H; Naitou, T; Matsuda, S; Murakami, A; Muraji, Y; Nakagawa, Y. J. Polym. Sci., Part B: Polym. Phys. 2007, 45, 1425
22. Wu, W; Hunston, D; Yang, H; Sten, R. Macromolecules 1988, 21, 756
23. Mijovic, J; Koutsky, J. Polymer 1979, 20, 1095
24. Morgan, R; O'Neal, J. J. Mater. Sci. 1977, 12, 1966
25. Labana, S; Newman, S; Chompff, A. In Polymer Networks: Structural and Mechanical Properties; Chompff, A; Newman, S., Eds.; Plenum: New York, 1971.
26. Sahagun, C; Morgan, S. SAMPE 41st ISTC; Witchita, KS; SAMPE: Covina, CA, 2009
27. Sahagun, C; Knauer, K; Morgan, S. J. Appl. Polym. Sci. 2012, in press.
28. Holm, E. J. Am. Ceram. Soc. 1998, 81, 455
29. Holm, E; Duxbury, P. Scr. Mater. 2006, 54, 1035
30. Holm, E; Meinke, H; McGarrity, E; Duxbury, P. Mater. Sci. Forum 2004, 467-470, 1039
31. Kausch, H. In Polymer Fracture: Springer-Verlag: Berlin, 1978.
32. Friedrich, K. Ph.D. Dissertation Ruhr-Universitat Bochum, Bochum, Germany, 1978.
33. Franck, A. APN007; TA Instruments: New Castle, DE, 2008
34. Chambon, F; Winter, H. J. Rheol. 1987, 31, 683
35. Winter, H; Chambon, F. J. Rheol. 1986, 30, 367
36. Halley, P; George, G. In Chemorheology of Polymers; Cambridge University Press: Cambridge, U.K., 2009.
37. Menard, K. In Dynamic Mechanical Analysis: CRC Press: Boca Raton, FL, 1999.
38. Pramanik, M; Swanson, J; Scott, J; Mendon, S; Rawlins, J. SAMPE 41st ISTC; Witchita, KS; SAMPE: Covina, CA, 2009.
39. Min, B; Stachurski, Z; Hodgkin, J; Heath, G. Polymer 1993, 34, 3620
40. Kozielski, K; George, G, St.; John, N; Billingham, N. High Perform. Polym. 1994, 6, 263
41. Mijovic, J; Wijaya, J. Polymer 1994, 35, 2683
42. Xu, L; Schlup, J. J. Appl. Polym. Sci. 1998, 67, 895
43. Schechter, J; Wynstra, J; Kurkjy, R. Ind. Eng. Chem. Res. 1956, 48, 94
44. ASTM D5045: Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials; ASTM International: West Conshohocken, PA, 1995.
45. ASME Standard B46.1-1995: Surface Texture, Surface Roughness Waviness and Lay; American Society for Mechanical Engineers: New York, 1995.
46. Ellis, B. In Chemistry and Technology of Epoxy Resins: Blackie Academic & Professional: Glasgow, U.K., 1993.
47. Min, B; Stachurski, Z; Hodgkin, J. Polymer 1993, 34, 4488
48. Riccardi, C; Williams, R. J. Appl. Polym. Sci. 1986, 32, 3445
49. Sahagun, C; Morgan, S. Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 2011, 52, 132