Generation of multisinusoidal test signals for the identification of synchronous-machine parameters by using a voltage-source inverter

IEEE Transactions on Industrial Electronics

Volumn 57, Issue 1, 2010, Pages 430-439

  Vandoorn, Tine L ^a   De Belie, Frederik M ^a   Vyncke, Thomas J ^a   Melkebeek, Jan A ^a   Lataire, Philippe ^b  

^a GHENT UNIVERSITY   (Belgium)

^b VRIJE UNIVERSITEIT BRUSSEL   (Belgium)

Author keywords

[No Author keywords available]

Indexed keywords

BROADBAND SIGNAL; CROSS SATURATION; FIELD WINDING; HIGH-POWER; IEEE STANDARDS; LINEAR AMPLIFIERS; LOW FREQUENCY; MACHINE MODELS; MACHINE PARAMETERS; MULTISINE; PERMANENT MAGNET SYNCHRONOUS MACHINES; REQUIRED TIME; SWITCHING ACTION; SWITCHING CONVERTER; SYNCHRONOUS MACHINE; TEST SIGNAL; VOLTAGE-SOURCE INVERTER; WAVEFORM GENERATORS;

BROADBAND AMPLIFIERS; FREQUENCY RESPONSE; SIGNAL GENERATORS; SWITCHING CIRCUITS; SYNCHRONOUS MACHINERY; TESTING;

IDENTIFICATION (CONTROL SYSTEMS);

EID: 72749085351     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2031135     Document Type: Article

References (36)

1. D. Raca, P. Garcia, D. Reigosa, F. Briz, and R. Lorenz, "A comparative analysis of pulsating versus rotating vector carrier signal injection-based sensorless control," in Proc. IEEE APEC, Austin, TX, Feb. 24-28, 2008, pp. 879-885.
2. J. Verbeeck, R. Pintelon, and P. Lataire, "Influence of saturation on estimated synchronous machine parameters in standstill frequency response tests," IEEE Trans. Energy Convers., vol.15, no.3, pp. 277-283, Sep. 2000. (Pubitemid 32031445)
3. F. M. De Belie, J. A. Melkebeek, L. Vandevelde, R. K. Boel, K. R. Geldhof, and T. J. Vyncke, "A nonlinear model for synchronous machines to describe high-frequency signal based position estimators," in Proc. IEEE Int. Elect. Mach. Drives Conf., San Antonio, TX, May 15-18, 2005, pp. 696-703.
4. N. Bianchi and S. Bolognani, "Influence of rotor geometry of an IPM motor on sensorless control feasibility," IEEE Trans. Ind. Appl., vol.43, no.1, pp. 87-96, Jan./Feb. 2007. (Pubitemid 46431379)
5. N. Bianchi and S. Bolognani, "Sensorless-oriented design of PM motors," IEEE Trans. Ind. Appl., vol.45, no.4, pp. 1249-1257, Jul./Aug. 2009.
6. K. J. Meesen, P. Thelin, J. Soulard, and E. A. Lomonova, "Inductance calculations of permanent-magnet synchronous machines including flux change and self- and cross-saturations," IEEE Trans. Magn., vol.44, no.10, pp. 2324-2331, Oct. 2008.
7. P. Guglielmi, M. Pastorelli, and A. Vagati, "Cross-saturation effects on IPM motors and related impact on sensorless control," IEEE Trans. Ind. Appl., vol.42, no.6, pp. 1516-1522, Nov./Dec. 2006.
8. B. Štumberger, G. Štumberger, D. Dolinar, A. Hamler, and M. Trlep, "Evaluation of saturation and cross-magnetization effects in interior permanent-magnet synchronous motor," IEEE Trans. Ind. Appl., vol.39, no.5, pp. 1264-1271, Sep./Oct. 2003.
9. B. Sneyers, D. W. Novotny, and T. A. Lipo, "Field weakening in buried permanent magnet AC motor drives," IEEE Trans. Ind. Appl., vol.IA-21, no.2, pp. 398-407, Mar./Apr. 1985.
10. F. Morel, X. Lin-Shi, J.-M. Rétif, B. Allard, and C. Buttay, "A comparative study of predictive current control schemes for a permanent-magnet synchronous machine drive," IEEE Trans. Ind. Electron., vol.56, no.7, pp. 2715-2728, Jul. 2009.
11. I.-J. Ha and S.-H. Lee, "An online identification method for both stator and rotor resistances of induction motors without rotational transducers," IEEE Trans. Ind. Electron., vol.47, no.4, pp. 842-853, Aug. 2000.
12. G. Kang, J. Kim, and K. Nam, "Parameter estimation scheme for lowspeed linear induction motors having different leakage inductances," IEEE Trans. Ind. Electron., vol.50, no.4, pp. 708-716, Aug. 2003.
13. M. H. Shin and D. S. Hyun, "Online identification of stator transient inductance in rotor-flux-oriented induction motor drive," IEEE Trans. Ind. Electron., vol.54, no.4, pp. 2018-2023, Aug. 2007.
14. R. Babau, I. Boldea, T. J. E. Miller, and N. Muntean, "Complete parameter identification of large induction machines from no-load accelerationdeceleration tests," IEEE Trans. Ind. Electron., vol.53, no.4, pp. 1962-1972, Aug. 2007.
15. V. M. Leppänen and J. Loumi, "Observer using low-frequency injection for sensorless induction motor control-parameter sensitivity analysis," IEEE Trans. Ind. Electron., vol.53, no.1, pp. 216-224, Feb. 2006.
16. S. Ichikawa, M. Tomita, S. Doki, and S. Okuma, "Sensorless control of permanent-magnet synchronous motors using online parameter identification based on system identification theory," IEEE Trans. Ind. Electron., vol.53, no.2, pp. 363-372, Apr. 2006.
17. K. W. Lee, D. H. Jung, and I. J. Ha, "An online identification method for both stator resistance and back EMF coefficient of PMSMs without rotational transducers," IEEE Trans. Ind. Electron., vol.51, no.2, pp. 507-510, Apr. 2004.
18. M. J. Durán, J. L. Durán, F. Pérez, and J. Fernández, "Induction-motor sensorless vector control with online parameter estimation and overcurrent protection," IEEE Trans. Ind. Electron., vol.53, no.1, pp. 154-161, Feb. 2006.
19. F. S. Sellschopp and M. A. Arjona, "Determination of synchronous machine parameters using standstill frequency response tests at different excitation levels," in Proc. IEEE IEMDC, Antalya, Turkey, May 3-5, 2007, vol.2, pp. 1014-1019.
20. E. C. Bortoni and J. A. Jardini, "A standstill frequency response method for large salient pole synchronous machines," IEEE Trans. Energy Convers., vol.4, no.19, pp. 687-691, Dec. 2004.
21. M. E. Coultes and W.Watson, "Synchronous machine models by standstill frequency response tests," IEEE Trans. Power App. Syst., vol.PAS-100, no.4, pp. 1480-1489, Apr. 1981.
22. IEEE Guide: Test Procedures for Synchronous Machines, IEEE Std. 115-1995, 1995.
23. J. Verbeeck, R. Pintelon, and P. Lataire, "Identification of synchronous machine parameters using a multiple input multiple output approach," IEEE Trans. Energy Convers., vol.14, no.4, pp. 909-917, Dec. 1999.
24. P. L. Dandeno, H. C. Karmaker, C. Azuaje, M. Glinkowski, I. Kamwa, S. J. Salon, R. M. Saunders, and S. Umans, "Experience with standstill frequency response (SSFR) testing and analysis of salient pole synchronous machines," IEEE Trans. Energy Convers., vol.14, no.4, pp. 1209-1217, Dec. 1999.
25. J. Verbeeck, "Standstill frequency response measurement and identification methods for synchronous machines," Ph.D. dissertation, Vrije Universiteit Brussel, Brussels, Belgium, Jan. 2000.
26. T. J. Vyncke, F. M. De Belie, R. K. Boel, J. Melkebeek, Y. Cheng, and P. Lataire, "Identification of PM synchronous machines in the frequency domain by broadband excitation," in Proc. Int. SPEEDAM, Ischia, Italy, Jun. 11-13, 2008, pp. 1253-1258.
27. B. K. Bose, "Power electronics and motor drives, recent progress and perspective," IEEE Trans. Ind. Electron., vol.56, no.2, pp. 581-588, Feb. 2009.
28. T. L. Vandoorn, F. M. De Belie, T. J. Vyncke, J. A. Melkebeek, and P. Lataire, "Generating multisinusoidal test signals by using a VSI for the identification of synchronous machines," in Proc. ICEM, Vilamoura, Portugal, Sep. 6-9, 2008, pp. 1-6.
29. D. G. Holmes AND T. A. Lipo, Pulse Width Modulation for Power Converters, ser. IEEE Series on Power Engineering. New York: Wiley-Interscience, 2003.
30. R. Pintelon and J. Schoukens, System Identification a Frequency Domain Approach. Piscataway, NJ: IEEE Press, 2001.
31. C. Demian, A. Mpanda-Mabwe, H. Henao, and G.-A. Capolino, "Detection of induction machines rotor faults at standstill using signals injection," IEEE Trans. Ind. Appl., vol.40, no.6, pp. 1550-1559, Nov./Dec. 2004.
32. S. Hadji, O. Touhami, and C. J. Goodman, "Vector-optimised harmonic elimination for single-phase pulse-width modulation inverters/ converters," IET Elect. Power Appl., vol.1, no.3, pp. 423-432, May 2007.
33. K. R. Padiyar, Analysis of Subsynchronous Resonance in Power Systems. Berlin, Germany: Springer-Verlag, 1998, ser. Power Electronics and Power Systems Series.
34. P. M. Anderson and A. A. Fouad, Power System Control and Stability, vol.1. Ames, IA: Iowa State Univ. Press, 1977.
35. M. Cirrincione, M. Pucci, G. Cirrincione, and G.-A. Capolino, "Constrained minimization for parameter estimation of induction motors in saturated and unsaturated conditions," IEEE Trans. Ind. Electron., vol.52, no.5, pp. 1391-1402, Oct. 2005.
36. J. A. Melkebeek, P. Vas, and J. E. Brown, "Dynamic analysis of synchronous machines incorporating the effects of main flux saturation," in Proc. 20th Univ. Power Eng. Conf.,West Yorkshire, U.K., Apr. 2-4, 1985, pp. 238-241.