Bulk modulus of compressibility of diesel/biodiesel/HVO blends

Energy and Fuels

Volumn 26, Issue 2, 2012, Pages 1336-1343

  Lapuerta, Magín ^a   Agudelo, John R ^b   Prorok, Matthew ^c   Boehman, André L ^c  

^a UNIVERSITY OF CASTILLA LA MANCHA   (Spain)

^b UNIVERSIDAD DE ANTIOQUIA   (Colombia)

^c PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CALIBRATION FLUIDS; DIESEL INJECTION; FUEL SAMPLES; HYDROTREATED OIL; ISOTHERMAL BULK MODULUS; NONLINEAR EFFECT; SOYBEAN OIL; SYNERGISTIC EFFECT; TERNARY BLENDS;

BIODIESEL; COMPRESSIBILITY; DIESEL FUELS; FUELS; OILSEEDS;

ELASTIC MODULI;

EID: 84857401104     PISSN: 08870624     EISSN: 15205029     Source Type: Journal    
DOI: 10.1021/ef201608g     Document Type: Article

References (29)

1. Choi, C. Y.; Bower, G. R.; Reitz, R. D. Effect of Biodiesel Blended Fuels and Multiple Injections on DI Diesel Engines, Technical Paper No. 970218; Society of Automotive Engineers: Warrendale, PA, 1997.
2. Monyem, A.; Van Gerpen, J. H.; Canakci, M. The effect of timing and oxidation on emissions from biodiesel-fueled engines Trans. ASAE 2001, 44 (1) 35-42 (Pubitemid 32931065)
3. Szybist, J. P.; Boehman, A. L. Behavior of a Diesel Injection System with Biodiesel Fuel, Technical Paper No. 2003-01-1039; Society of Automotive Engineers: Warrendale, PA, 2003.
4. Tat, M. E.; Van Gerpen, J. J. Measurement of Biodiesel Speed of Sound and Its Impact on Injection Timing, NREL/SR-510-31462; National Renewable Energy Laboratory: Golden, CO, 2003.
5. Tat, M. E.; Van Gerpen, J. J.; Soylu, S.; Canakci, M.; Monyem, A.; Wormley, S. The speed of sound and isentropic bulk modulus of biodiesel at 21 °C from atmospheric pressure to 35 MPa J. Am. Oil Chem. Soc. 2000, 77 (3) 285-289 (Pubitemid 30582939)
6. Rakopoulos, C. D.; Hountalas, D. T. A simulation analysis of a DI diesel engine fuel injection system fitted with a constant pressure valve Energy Convers. Manage. 1996, 37 (2) 135-150 (Pubitemid 126351679)
7. Arcoumanis, C.; Gavaises, M.; Yamanishi, M.; Oiwa, J. Application of FIE Computer Model to an in-Line Pump-Based Injection System for Diesel Engines, Technical Paper No. 970348; Society of Automotive Engineers: Warrendale, PA, 1997.
8. x Emissions from Biodiesel, Technical Paper No. 2002-01-1658; Society of Automotive Engineers: Warrendale, PA, 2002.
9. x emissions of alternative diesel fuels: A comparative analysis of biodiesel and FT diesel Energy Fuels 2005, 19, 1484-1492
10. x emissions in a common rail DI diesel engine Energy Fuels 2007, 21, 2003-2012 (Pubitemid 47225509)
11. Yehliu, K.; Boehman, A. L.; Armas, O. Emissions from different alternative diesel fuels operating with single and split fuel injection Fuel 2010, 89, 423-437
12. Bridgman, P. W. The Physics of High Pressure; G. Bell and Sons: London, 1958.
13. Cutler, W. G.; McMickle, R. H.; Webb, W.; Schiessler, R. W. Study of the compression of several high molecular weight hydrocarbons J. Chem. Phys. 1958, 29, 727-740
14. Marcus, Y.; Hefter, G. T. The compressibility of liquids at ambient temperature and pressure J. Mol. Liq. 1997, 73-74, 61-74 (Pubitemid 127400215)
15. Boehman, A. L.; Morris, D.; Szybist, J.; Esen, E. The impact of the bulk modulus of diesel fuels on fuel injection timing Energy Fuels 2004, 18, 1877-1882
16. Martínez-Boza, F. J.; Martín-Alfonso, M. J.; Gallegos, C.; Fernández, M. High-pressure behavior of intermediate fuel oils Energy Fuels 2011, 25 (11) 5138-5144
17. Rodríguez-Antón, L. M.; Aparicio, C.; Guignon, B.; Sanz, P. D. Volumetric properties at high pressure of waste oil methyl ester compared with diesel oil Fuel 2008, 87, 1934-40 (Pubitemid 351508252)
18. Kegl, B. Numerical analysis of injection characteristics using biodiesel blends Fuel 2006, 85, 2377-2387 (Pubitemid 44128489)
19. Payri, R.; Salvador, F. J.; Gimeno, J.; Bracho, G. The effect of temperature and pressure on thermodynamic properties of diesel and biodiesel fuels Fuel 2011, 90, 1172-80
20. Dzida, M.; Prusakiewicz, P. The effect of temperature and pressure on the physicochemical properties of petroleum diesel oil and biodiesel fuel Fuel 2008, 87, 1941-1948 (Pubitemid 351512292)
21. Hayward, A. T. J. Compressibility equations for liquids: A comparative study Br. J. Appl. Phys. 1967, 18, 965-77
22. OBrien, J. A. Precise measurement of liquid bulk modulus. M.S. Thesis, The Pennsylvania State University, University Park, PA, 1963.
23. Lapuerta, M.; Villajos, M.; Agudelo, J. R.; Boehman, A. L. Key properties and blending strategies of hydrotreated vegetable oil as biofuel for diesel engines Fuel Process. Technol. 2011, 92, 2406-2411
24. Lapuerta, M.; Rodriguez-Fernández, J.; Agudelo, J. R.; Boehman, A. L. Soybean oil derived biofuels for diesel engines. Biomass Bioenergy, submitted for publication.
25. Graboski, M. S.; McCormick, R. L. Combustion of fat and vegetable oil derived fuels in diesel engines Prog. Energy Combust. Sci. 1998, 24, 125-64 (Pubitemid 128378383)
26. Knothe, G. Biodiesel and renewable diesel: A comparison Prog. Energy Combust. Sci. 2010, 36 (3) 364-73
27. Canakci, M.; Sanli, H. Biodiesel production from various feedstocks and their effects on the fuel properties J. Ind. Microbiol. Biotechnol. 2008, 35 (5) 431-41
28. Haywood, R. W. Thermodynamic Tables in SI (Metric) Units; Cambridge University Press: Cambridge, 1972.
29. Kell, G. S.; Whalley, E. The pVT properties of water I. Liquid water in the temperature range 0 to 150 °C and at pressures up to 1 kb Philos. Trans. R. Soc., A 1965, 258, 565-617