The effect of temperature and pressure on thermodynamic properties of diesel and biodiesel fuels

Fuel

Volumn 90, Issue 3, 2011, Pages 1172-1180

  Payri, R ^a   Salvador, F J ^a   Gimeno, J ^a   Bracho, G ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

Biofuel; Density; Diesel; Fuel properties; Speed of sound

Indexed keywords

ACCURATE MEASUREMENT; BIO-DIESEL FUEL; BULK MODULUS; DENSITY; DENSITY MEASUREMENTS; DIESEL; EFFECT OF TEMPERATURE; EXTREME CONDITIONS; FUEL PROPERTIES; HIGH-PRESSURE INJECTION; INJECTION SYSTEMS; METHYL ESTERS; PRESSURE AND TEMPERATURE; SPEED OF SOUND; SPEED OF SOUNDS; TYPICAL VALUES; WINTER SEASONS; WORK FOCUS;

ACOUSTIC WAVE VELOCITY; ARCHITECTURAL ACOUSTICS; BIOFUELS; DIESEL FUELS; ESTERS; PRESSURE EFFECTS; SPEED; SYNTHETIC FUELS; TEMPERATURE; UNCERTAINTY ANALYSIS;

DIESEL ENGINES;

EID: 79951951594     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2010.11.015     Document Type: Article

References (30)

1. S.H. Park, H.J. Kim, H.K. Suh, and C.S. Lee Experimental and numerical analysis of spray-atomization characteristics of biodiesel fuel in various fuel and ambient temperatures conditions Int J Heat Fluid Flow 30 2009 960 970
2. M.E. Tat, J.J. Van Gerpen, S. Soylu, M. Canakci, A. Monyem, and S. Wormley The speed of sound and isentropic bulk modulus of biodiesel at 21 degrees from atmospheric pressure to 35 MPa J Am Oil Chem Soc 77 2000 285 289 (Pubitemid 30582939)
3. A.L. Boehman, D. Morris, and J. Szybist The impact of bulk modulus of diesel fuels on fuel injection timing Energy Fuels 18 2004 1877 1882
4. J. Benajes, J.V. Pastor, R. Payri, and A.H. Plazas Analysis of the influence of diesel nozzle geometry in the injection rate characteristic J Fluids Eng 126 2004 63 71
5. Rodriguez-Anton LM, Casanova-Kindelan J, Tardajos G. High pressure physical properties of fluids used in diesel injection Systems. SAE paper 2000-01-2046; 2000.
6. R. Payri, J.M. García, F.J. Salvador, and J. Gimeno Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics Fuel 84 2005 551 561
7. Siebers D. Liquid-phase fuel penetration in diesel sprays. SAE paper 980809; 1998.
8. J.M. Lujan, B. Tormos, F.J. Salvador, and K. Gargar Comparative analysis of a DI diesel engine fuelled with biodiesel blends during the European MVEG-A cycle: Preliminary study (I) Biomass Bioenergy 33 2009 941 947
9. F. Boudy, and P. Seers Impact of physical properties of biodiesel on the injection process in a common-rail direct injection system Energy Convers Manage 50 2009 2905 2912
10. R. Payri, B. Tormos, F.J. Salvador, and A.H. Plazas Using one-dimensional modeling codes to analyze the influence of diesel nozzle geometry on injection rate characteristics Int J Veh Des 38 2005 58 78 (Pubitemid 40541967)
11. F. Payri, F.J. Salvador, J. Gimeno, and G. Bracho A new methodology for correcting the signal cumulative phenomenon on injection rate measurements Exp Tech 32 2008 46 49 (Pubitemid 351167065)
12. B. Kegl Biodiesel usage at low temperature Fuel 87 2008 1306 1317 (Pubitemid 351625178)
13. R. Payri, F.J. Salvador, J. Gimeno, and G. Bracho Effect of fuel properties on diesel spray development at extreme cold conditions Proc Inst Mech Eng Part D - J Automobile Eng 222 2008 1743 1753
14. M.J. Dávila, and J.P.M. Trusler Thermodynamic properties of mixtures of N-methyl-2-pyrrolidinone and methanol at temperatures between 298, 15 K and 343.15 K and pressures up to 60 MPa J Chem Thermodyn 41 2009 35 45
15. J.L. Daridon, A. Lagrabette, and B. Lagourette Speed of sound, density, and compressibilities of heavy synthetic cuts from ultrasonic measurements under pressure J Chem Thermodyn 30 1998 607 623 (Pubitemid 128398601)
16. J.P.M. Trusler Physical acoustics and metrology of fluids 1991 Taylor and Francis Group New York
17. G. Douheret, M.I. Davis, J.C.R. Rais, and M.J. Blandamer Isentropic compressibilities-experimental origin and the quest for their rigorous estimation in thermodynamically ideal liquid mixtures Chem Phys Chem 2 2001 148 161
18. D.E. Winterbone, and R.J. Pearson Theory of engine manifold design. Wave action methods for IC engines 2000 Professional Engineering Publishing London
19. A.T. Hayward How to measure the isothermal compressibility of liquids accurately J Phys D: Appl Phys 4 1971 938 950
20. J.M.S.S. Esperana, Z.P. Visak, N.V. Plechkova, K.R. Seddon, H.J.R. Guedes, and L.P.N. Rebelo Density, speed of sound and derived thermodynamic properties of ionic liquids over an extended pressure range J Chem Eng Data 51 2006 2009 2015
21. Bianchi GM, Falfari S, Parotto M, Osbat G. Advanced modeling of common rail injector dynamics and comparison with experiments. SAE Paper 2003-01-0006; 2003.
22. J.P. Holman Experimental methods for engineers 1994 McGraw-Hill New York
23. R. Benedict Fundamentals of temperature, pressure and flow measurements 3rd ed. 1984 Wiley-Interscience Publication USA
24. F. Plantier, J.L. Daridon, and B. Lagourette Measurement of the B/A nonlinearity parameter under high pressure: Application to water J Acoust Soc Am 111 2002 707 715 (Pubitemid 34127449)
25. S.J. Ball, and J.P.M. Trusler The speed of sound and derived thermodynamic properties of n-hexane and n-hexadecane at temperatures between 298 K and 373 K and pressures up to 100 MPa Int J Thermophys 22 2001 427 443
26. http://webbook.nist.gov/chemistry/fluid/.
27. L.M. Rodriguez -Anton, C. Aparicio, B. Guignon, and P.D. Sanz Volumetric properties at high pressure of waste oil methyl ester compared with diesel oil Fuel 87 2008 1934 1940 (Pubitemid 351508252)
28. Salvador FJ, Romero JV, Roselló MD, Martínez-López J. Validation of a code to model cavitation phenomena in diesel injector nozzles. Mathematical and Computer Modelling, accepted for publication. doi:10.1016/j.mcm.2010.02.027.
29. O. Armas, K. Yehliu, and A.L. Boehman Effect of alternative fuels on exhaust emissions during diesel engine operation with matched combustion phasing Fuel 89 2010 438 456
30. P.W. Bridgman The physics of high pressure 1958 G. Bell and Sons London p. 116-49