Permanent magnet synchronous machine sizing: Effect on the energy efficiency of an electro-hydraulic forklift

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 6, 2012, Pages 2466-2474

  Minav, Tatiana A ^a   Pyrhönen, Juha J ^a   Laurila, Lasse I E ^a  

^a LAPPEENRANTA UNIVERSITY OF TECHNOLOGY   (Finland)

Author keywords

Electro hydraulics; Energy consumption; Energy conversion; Energy efficiency; Hydraulic system; Motor drives; Permanent magnet machines; Power conversion

Indexed keywords

ELECTRO-HYDRAULICS; HYDRAULIC SYSTEM; MOTOR DRIVES; PERMANENT MAGNET MACHINES; POWER CONVERSION;

ELECTRIC DRIVES; ELECTRIC LOSSES; ELECTRIC MACHINERY; ENERGY CONVERSION; ENERGY UTILIZATION; HYDRAULIC EQUIPMENT; MATERIALS HANDLING EQUIPMENT; SYNCHRONOUS MACHINERY;

ENERGY EFFICIENCY;

EID: 84857379297     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2148682     Document Type: Article

References (39)

1. G. A. Petrone, G. Spagnuolo, and M. Vitelli, "Low-frequency current oscillations and maximum power point tracking in grid-connected fuelcell- based systems, " IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2042- 2053, Jun. 2010.
2. C. M. V. Gonzalez, J. R. Arribas, and D. R. Prieto, "Optimal regulation of electric drives with constant load torque, " IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1762-1769, Dec. 2006. (Pubitemid 46432468)
3. A. Y. Saber and G. K. Venayagamoorthy, "Plug-in vehicles and renewable energy sources for cost and emission reductions, " IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1229-1238, Apr. 2011.
4. T. Bhattacharya, V. S. Giri, K. Mathew, and L. Umanand, "Multiphase bidirectional flyback converter topology for hybrid electric vehicles, " IEEE Trans. Ind. Electron., vol. 56, no. 1, pp. 78-84, Jan. 2009.
5. P. J. Grbovic, P. Delarue, P. Le Moigne, and P. Bartholomeus, "Modelling and control of the ultra-capacitor based regenerative controlled electric drives, " IEEE Trans. Ind. Electron., Oct. 2010, to be published.
6. M.Montazeri-Gh and M. Soleymani, "Investigation of the energy regeneration of active suspension system in hybrid electric vehicles, " IEEE Trans. Ind. Electron., vol. 57, no. 3, pp. 918-925, Mar. 2010.
7. F. L.Mapelli, D. Tarsitano, and M. Mauri, "Plug-in hybrid electric vehicle: Modeling, prototype realization, and inverter losses reduction analysis, " IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 598-607, Feb. 2010.
8. C. Liu, K. T. Chau, and J. Z. Jiang, "A permanent-magnet hybrid brushless integrated starter-generator for hybrid electric vehicles, " IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4055-4064, Dec. 2010.
9. H. Fakham, D. Lu, and B. Francois, "Power control design of a battery charger in a hybrid active PV generator for load-following applications, " IEEE Trans. Ind. Electron., vol. 58, no. 1, pp. 85-94, Jan. 2011.
10. T. Zhou and B. Francois, "Energy management and power control of a hybrid active wind generator for distributed power generation and grid integration, " IEEE Trans. Ind. Electron., vol. 58, no. 1, pp. 95-104, Jan. 2011.
11. P. J. Grbovic, P. Delarue, P. Le Moigne, and P. Bartholomeus, "The ultracapacitor-based controlled electric drives with braking and ridethrough capability: Overview and analysis, " IEEE Trans. Ind. Electron., vol. 58, no. 3, pp. 925-936, Mar. 2011.
12. M. Ivantysynova, "Innovations in pump design-What are future directions, " in Proc. Int. Symp. Fluid Power, Toyama, Japan, 2008, pp. 59-64.
13. M. Linjama and M. Vilenius, "Improved digital hydraulic tracking control of water hydraulic cylinder drive, " Int. J. Fluid Power, vol. 6, no. 1, pp. 29-39, 2005. (Pubitemid 40635454)
14. J. T. E. Ferreira, C. Fong, and T. de Almeida, "Eco-analysis of variablespeed drives for flow regulation in pumping systems, " IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2117-2125, Jun. 2011.
15. A.-L. Allegre, A. Bouscayrol, P. Delarue, P. Barrade, E. Chattot, and S. El-Fassi, "Energy storage system with supercapacitor for an innovative subway, " IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4001-4012, Dec. 2010.
16. P. Garcia, L. M. Fernandez, C. A. Garcia, and F. Jurado, "Energy management system of fuel-cell-battery hybrid tramway, " IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4013-4023, Dec. 2010.
17. A. Emadi, L. Y. J. Lee, and K. Rajashekara, "Power electronics and motor drives in electric, hybrid electric, and plug-in hybrid electric vehicles, " IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2237-2245, Jun. 2008.
18. J. Moreno, M. E. Ortúzar, and J. W. Dixon, "Energy-management system for a hybrid electric vehicle, using ultracapacitors and neural networks, " IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 614-623, Apr. 2006.
19. H. Yang, W. Sun, and B. Xu, "New investigation in energy regeneration of hydraulic elevators, " IEEE/ASME Trans. Mechatronics, vol. 12, no. 5, pp. 519-526, Oct. 2007. (Pubitemid 350120515)
20. J. I. Yoon, A. K. Kwan, and D. Q. Truong, "A study on an energy saving electro-hydraulic excavator, " in Proc. ICROS-SICE Int. Joint Conf., Fukuoka, Japan, Aug. 18-21, 2009, pp. 3825-3830.
21. X. Liang and T. Virvalo, "What's wrong with energy utilization in hydraulic cranes, " in Proc. 5th Int. Conf. Fluid Power Transm. Control, Hangzhou, China, 2001.
22. W. Jiang and B. Fahimi, "Active current sharing and source management in fuel cell-battery hybrid power system, " IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 752-761, Feb. 2010.
23. M.-J. Yang, H.-L. Jhou, B.-Y. Ma, and K.-K. Shyu, "A cost-effective method of electric brake with energy regeneration for electric vehicles, " IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2203-2212, Jun. 2009.
24. Z. Amjadi and S. S. Williamson, "Power-electronics-based solutions for plug-in hybrid electric vehicle energy storage and management systems, " IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 608-616, Feb. 2010.
25. P. Grbovic, P. Delarue, P. Le Moigne, and P. Bartholomeus, "Ultracapacitor based controlled electric drives with braking and ride-through capability: Overview and analysis, " IEEE Trans. Ind. Electron., vol. 58, no. 3, pp. 925-936, Mar. 2011.
26. A. S. Samosir and A. H. M. Yatim, "Implementation of dynamic evolution control of bidirectional DC-DC converter for interfacing ultracapacitor energy storage to fuel-cell system, " IEEE Trans. Ind. Electron., vol. 57, no. 10, pp. 3468-3473, Oct. 2010.
27. P. A. Cassani and S. S. Williamson, "Design, testing, and validation of a simplified control scheme for a novel plug-in hybrid electric vehicle battery cell equalizer, " IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 3956- 3962, Dec. 2010.
28. T. Minav, L. Laurila, J. Pyrhönen, and V. Vtorov, "Direct pump control effects on the energy efficiency in an electro-hydraulic lifting system, " J. Int. Rev. Autom. Control, vol. 4, no. 2, Mar. 2011.
29. T. Minav, L. Laurila, P. Immonen, M. Haapala, and J. Pyrhönen, "Electric energy recovery system efficiency in a hydraulic forklift, " in Proc. IEEE EUROCON, St. Petersburg, Russia, May 2009, pp. 758-765.
30. J. Luukko, M. Niemelä, and J. Pyrhönen, "Estimation of rotor and load angle of direct-torque-controlled permanent magnet synchronous machine drive, " IET Elect. Power Appl., vol. 1, no. 3, pp. 299-306, May 2007. (Pubitemid 46743653)
31. SEW Drive Engineering-Practical Implementation. (accessed Nov. 13, 2007). [Online]. Available: http://www.sew-eurodrive.com.
32. J. Pyrhönen, T. Jokinen, and V. Hrábovcová, Design of Rotating Electrical Machines. (accessed Jan. 2011). [Online]. Available: http://onlinelibrary.wiley.com.
33. J. Nerg, J. Pyrhönen, and J. Partanen, "Finite element modeling of the magnetizing inductance of an induction motor as a function of torque, " IEEE Trans. Magn., vol. 40, no. 4, pp. 2047-2049, Jul. 2004.
34. T. A. Minav, P. A. Immonen, L. I. E. Laurila, V. B. Vtorov, J. J. Pyrhönen, and M. Niemelä, "Electric energy recovery system for a hydraulic forklift-Theoretical and experimental evaluation, " IET Elect. Power Appl., 2011, to be published.
35. J. Pyrhönen, M. Niemelä, J. Kaukonen, J. Luukko, and O. Pyrhönen, "Test results with the direct flux linkage control of synchronous machines, " IEEE Aerosp. Electron. Syst. Mag., vol. 13, no. 4, pp. 23-27, Apr. 1998.
36. M. Preindl, E. Schaltz, and P. Thøgersen, "Switching frequency reduction using model predictive direct current control for high power voltage source inverters, " IEEE Trans. Ind. Electron., vol. 58, no. 7, pp. 2826- 2835, Jul. 2011.
37. ABB: Motion Control Program Firmware. (accessed Nov. 13, 2007).[Online]. Available: http://www.abb.com.
38. T. A. Minav, P. A. Immonen, J. J. Pyrhönen, and L. I. E. Laurila, "Effect of PMSM sizing on the energy efficiency of an electro-hydraulic forklift, " in Proc. IX Int. Conf. Elect. Mach., Rome, Italy, 2010, pp. 470-475.
39. T. Minav, L. Laurila, and J. Pyrhönen, "Energy recovery efficiency comparison in an electro-hydraulic forklift and in a diesel hybrid heavy forwarder, " in Proc. SPEEDAM, Pisa, Italy, 2010, pp. 574-579.