SCOPUS 정보 검색 플랫폼

Tribology International

Volumn 48, Issue , 2012, Pages 102-112

Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfaces

(3) Sedlaček, Marko a Podgornik, Bojan b Vižintin, Jože a

a UNIVERSITY OF LJUBLJANA (Slovenia)

b INSTITUTE OF METALS AND TECHNOLOGY (Slovenia)

Author keywords

Friction; Kurtosis; Roughness parameters; Skewness

Indexed keywords

CONTACT CONDITIONS; CONTACT SURFACE; GRINDING AND POLISHING; KURTOSIS; PIN-ON-DISC-TESTS; ROUGHNESS PARAMETERS; SKEWNESS; STEEL PLATES; SURFACE ROUGHNESS PARAMETERS; TRIBOLOGICAL BEHAVIOUR;

FRICTION; TRIBOLOGY;

STATISTICAL METHODS;

EID: 84857231882 PISSN: 0301679X EISSN: None Source Type: Journal
DOI: 10.1016/j.triboint.2011.11.008 Document Type: Conference Paper

Times cited : (269)

References (20)

1
- 0037051748
- Roughness parameters
- DOI 10.1016/S0924-0136(02)00060-2, PII S0924013602000602
- E.S. Gadelmawla, M.M. Koura, T.M.A. Maksoud, I.M. Elewa, and H.H. Soliman Roughness parameters Journal of Materials Processing Technology 123 2002 133 145 (Pubitemid 34249719)
- (2002) Journal of Materials Processing Technology , vol.123 , Issue.1 , pp. 133-145
- Gadelmawla, E.S.¹ Koura, M.M.² Maksoud, T.M.A.³ Elewa, I.M.⁴ Soliman, H.H.⁵

2
- 31444436558
- Effect of surface roughness parameters on mixed lubrication characteristics
- DOI 10.1016/j.triboint.2005.03.018, PII S0301679X0500099X
- Wen-zhong Wang, Hui Chen, Yuan-Zhong Hu, and Hui Wang Effect of surface roughness parameters on mixed lubrication characteristics Tribology International 39 2006 522 527 (Pubitemid 43152358)
- (2006) Tribology International , vol.39 , Issue.6 , pp. 522-527
- Wang, W.-Z.¹ Chen, H.² Hu, Y.-Z.³ Wang, H.⁴

3
- 0016021016
- Surface finish and damage in sliding
- W. Hirst, and A.E. Hollander Surface finish and damage in sliding Proceedings of the Royal Society 337A 1974 379 394
- (1974) Proceedings of the Royal Society , vol.337 A , pp. 379-394
- Hirst, W.¹ Hollander, A.E.²

4
- 0029673396
- Impact of plateaued surfaces on tribological performance
- Y.-R. Jeng Impact of plateaued surfaces on tribological performance STLE Tribology Transactions 39 1 1996 354 361 (Pubitemid 126770342)
- (1996) Tribology Transactions , vol.39 , Issue.2 , pp. 354-361
- Jeng, Y.-R.¹

5
- 32144442881
- Zero-wear of piston skirt surface topography
- DOI 10.1016/j.wear.2005.03.038, PII S0043164805004345
- Z. Krzyzak, and P. Pawlus Zero-wear of piston skirt surface topography Wear 260 2006 554 561 (Pubitemid 43208817)
- (2006) Wear , vol.260 , Issue.4-5 , pp. 554-561
- Krzyzak, Z.¹ Pawlus, P.²

6
- 0028381095
- Description of honed cylinders surface topography
- J. Michalski, and P. Pawlus Description of honed cylinders surface topography International Journal of Machine Tools and Manufacture 34 1994 199 210
- (1994) International Journal of Machine Tools and Manufacture , vol.34 , pp. 199-210
- Michalski, J.¹ Pawlus, P.²

7
- 1842454656
- Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces
- N. Tayebi, and A.A. Polycarpou Modeling the effect of skewness and kurtosis on the static friction coefficient of rough surfaces Tribology International 37 2004 491 505
- (2004) Tribology International , vol.37 , pp. 491-505
- Tayebi, N.¹ Polycarpou, A.A.²

8
- 0032064071
- Surface characterisation of electro-active thin polymeric film bearings
- PII S0890695597001168
- X. Liu, G. Chetwynd, and J.W. Gardner Surface characterization of electro-active thin polymeric film bearings International Journal of Machine Tools and Manufacture 38 56 1998 669 675 (Pubitemid 128388851)
- (1998) International Journal of Machine Tools and Manufacture , vol.38 , Issue.5-6 , pp. 669-675
- Liu, X.¹ Chetwynd, D.G.² Gardner, J.W.³

9
- 0030435042
- Surface engineering and microtribology for MEMS
- K. Komvopoulos Surface engineering and microtribology for MEMS Wear 200 1996 305 327
- (1996) Wear , vol.200 , pp. 305-327
- Komvopoulos, K.¹

10
- 33746151591
- Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test
- DOI 10.1016/j.msea.2006.05.080, PII S0921509306008975
- P.L. Menezes, Kishore, and S.V. Kailas Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test Materials Science and Engineering A429 12 2006 149 160 (Pubitemid 44081114)
- (2006) Materials Science and Engineering A , vol.429 , Issue.1-2 , pp. 149-160
- Menezes, P.L.¹ Kishore² Kailas, S.V.³

11
- 33751335709
- Effect of roughness parameter and grinding angle on coefficient of friction when sliding of Al-Mg alloy over EN8 steel
- DOI 10.1115/1.2345401
- P.L. Menezes, Kishore, and S.V. Kailas Effect of roughness parameter and grinding angle on coefficient of friction when sliding of AlMg alloy over EN8 steel Transactions of the ASME: Journal of Tribology 128 4 2006 697 704 (Pubitemid 44803638)
- (2006) Journal of Tribology , vol.128 , Issue.4 , pp. 697-704
- Menezes, P.L.¹ Kishore² Kailas, S.V.³

12
- 54249101354
- Influence of roughness parameters on coefficient of friction under lubricated conditions
- P.L. Menezes, Kishore, and S.V. Kailas Influence of roughness parameters on coefficient of friction under lubricated conditions Sadhana - Academy Proceedings in Engineering Sciences 33 3 2008 181 190
- (2008) Sadhana - Academy Proceedings in Engineering Sciences , vol.33 , Issue.3 , pp. 181-190
- Menezes, P.L.¹ Kishore² Kailas, S.V.³

13
- 0035500791
- Friction and adhesion of stainless steel strip against tool steels in unlubricated sliding with high contact load
- DOI 10.1016/S0301-679X(01)00074-3, PII S0301679X01000743
- A. Maatta, P. Vuoristo, and T. Mantyla Friction and adhesion of stainless steel strip against tool steels in unlubricated sliding with high contact load Tribology International 34 2001 779 786 (Pubitemid 32997789)
- (2001) Tribology International , vol.34 , Issue.11 , pp. 779-786
- Maatta, A.¹ Vuoristo, P.² Mantyla, T.³

14
- 0033726644
- A study of surface topography, friction and lubricants in metal forming
- Z.M. Hu, and T.A. Dean A study of surface topography, friction and lubricants in metal forming International Journal of Machine Tools and Manufacture 40 2000 1637 1649
- (2000) International Journal of Machine Tools and Manufacture , vol.40 , pp. 1637-1649
- Hu, Z.M.¹ Dean, T.A.²

15
- 0029350986
- Influence of surface roughness on normal-sliding lubrication
- J. Lundberg Influence of surface roughness on normal-sliding lubrication Tribology International 28 5 1995 317 322
- (1995) Tribology International , vol.28 , Issue.5 , pp. 317-322
- Lundberg, J.¹

16
- 0036563462
- The statistical correlation of the coefficient of friction and wear rate of PTFE composites with steel counterface roughness and hardness
- DOI 10.1016/S0043-1648(02)00029-7, PII S0043164802000297
- W. Wieleba The statistical correlation of the coefficient of friction and wear rate of PTFE composites with steel counterface roughness and hardness Wear 252 910 2002 719 729 (Pubitemid 34780929)
- (2002) Wear , vol.252 , Issue.9-10 , pp. 719-729
- Wieleba, W.¹

17
- 0346724503
- The effect of machined topography and integrity on fatigue life
- D. Novovic, R.C. Dewes, D.K. Aspinwall, W. Voice, and P. Bowen The effect of machined topography and integrity on fatigue life International Journal of Machine Tools and Manufacture 44 2004 125 134
- (2004) International Journal of Machine Tools and Manufacture , vol.44 , pp. 125-134
- Novovic, D.¹ Dewes, R.C.² Aspinwall, D.K.³ Voice, W.⁴ Bowen, P.⁵

18
- 58149098404
- Influence of surface preparation on roughness parameters, friction and wear
- M. Sedlaček, B. Podgornik, and J. Vižintin Influence of surface preparation on roughness parameters, friction and wear Wear 266 2009 482 487
- (2009) Wear , vol.266 , pp. 482-487
- Sedlaček, M.¹ Podgornik, B.² Vižintin, J.³

19
- 0031926980
- Contact analysis of non-Gaussian random surfaces
- S.K. Chilamakuri, and B. Bhushan Contact analysis of non-Gaussian random surfaces Proceedings of the Institution of Mechanical Engineers Part J - Journal of Engineering Tribology 212 J1 1998 19 32
- (1998) Proceedings of the Institution of Mechanical Engineers Part J - Journal of Engineering Tribology , vol.212 , Issue.J1 , pp. 19-32
- Chilamakuri, S.K.¹ Bhushan, B.²

20
- 15044358333
- State of the art in laser surface texturing
- DOI 10.1115/1.1828070
- I. Etsion State of the art in laser surface texturing Journal of Tribology 127 2005 248 253 (Pubitemid 40382712)
- (2005) Journal of Tribology , vol.127 , Issue.1 , pp. 248-253
- Etsion, I.¹

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.