Finite Fracture Mechanics at elastic interfaces

International Journal of Solids and Structures

Volumn 49, Issue 7-8, 2012, Pages 1022-1032

  Cornetti, P ^a   Mantic V ^b   Carpinteri, A ^a  

^a POLITECNICO DI TORINO   (Italy)

^b UNIVERSITY OF SEVILLE   (Spain)

Author keywords

Cohesive crack model; Double lap joint; Elastic interfaces; Finite Fracture Mechanics

Indexed keywords

AVERAGE STRESS CRITERION; COHESIVE CRACK MODELS; CONCENTRATION ANALYSIS; CRITICAL DISTANCE; DOUBLE LAP JOINT; ELASTIC INTERFACES; FAILURE LOAD; FINITE FRACTURE MECHANICS; FRACTURE CRITERIA; FRACTURE PROCESS ZONE; HOMOGENEOUS STRUCTURE; LINEAR ELASTIC; LINEAR ELASTIC FRACTURE MECHANICS; PROPAGATION CRITERION; SHEAR TESTS;

BRITTLE FRACTURE; CRACKS; STRESS CONCENTRATION;

FRACTURE MECHANICS;

EID: 84857038602     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2012.01.002     Document Type: Article

References (42)

1. J. Andersons, S. Tarasovs, and E. Sprniš Finite fracture mechanics analysis of crack onset at a stress concentration in a UD glass/epoxy composite in off-axis tension Composites Science and Technology 70 2010 1380 1385
2. S. Bennati, M. Colleluori, D. Corigliano, and P.S. Valvo An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates Composites Science and Technology 69 2009 1735 1745
3. Y. Benveniste, and T. Miloh Imperfect soft and stiff interfaces in two-dimensional elasticity Mechanics of Materials 33 2001 309 323 (Pubitemid 32457488)
4. D. Bigoni, S.K. Serkov, M. Valentini, and A.B. Movchan Asymptotic models of dilute composites with imperfectly bonded inclusions International Journal of Solids and Structures 35 1998 3239 3258 (Pubitemid 28416114)
5. D. Bruno, and F. Greco Mixed mode delamination in plates: a refined approach International Journal of Solids and Structures 38 2001 9149 9177 (Pubitemid 33112410)
6. A. Carpinteri Cusp catastrophe interpretation of fracture instability Journal of the Mechanics and Physics of Solids 37 1989 567 582 (Pubitemid 20690650)
7. A. Carpinteri Post-peak and post-bifurcation analysis on cohesive crack propagation Engineering Fracture Mechanics 32 1989 265 278
8. A. Carpinteri, P. Cornetti, and N. Pugno Edge debonding in FRP strengthened beams: stress assessment versus fracture mechanics approach Engineering Structures 31 2009 2436 2447
9. P. Cornetti, and A. Carpinteri Modelling the FRP-concrete delamination by means of an exponential softening law Engineering Structures 33 2011 1988 2001
10. P. Cornetti, N. Pugno, A. Carpinteri, and D. Taylor Finite fracture mechanics: a coupled stress and energy failure criterion Engineering Fracture Mechanics 73 2006 2021 2033 (Pubitemid 43971240)
11. A. Cottone, and G. Giambanco Minimum bond length and size effects in FRP-substrate bonded joints Engineering Fracture Mechanics 76 2009 1957 1976
12. L.F.M. Da Silva, P.J.C. das Neves, R.D. Adams, and J.K. Spelt Analytical models of adhesively bonded joints - Part I: literature survey International Journal of Adhesion and Adhesives 29 2009 319 330
13. A.H. England A crack between dissimilar media ASME Journal of Applied Mechanics 32 1965 400 402
14. M. Goland, and E. Reissner The stresses in cemented joints ASME Journal of Applied Mechanics 11 1944 A17 A27
15. Hart-Smith, L.J.; 1973. Adhesive-bonded double-lap joints. NASA Contract Report 112235.
16. Z. Hashin Thin interphase/imperfect interface in elasticity with application to coated composites Journal of the Mechanics and Physics of Solids 50 2002 2509 2537 (Pubitemid 35152371)
17. J. Hebel, R. Dieringer, and W. Becker Modelling brittle crack formation at geometrical and material discontinuities using a finite fracture mechanics approach Engineering Fracture Mechanics 77 2010 3558 3572
18. C. Henninger, D. Leguillon, and E. Martin Crack initiation at a V-notch - comparison between a brittle fracture criterion and the Dugdale cohesive model Comptes Rendu Mécanique 335 2007 388 393 (Pubitemid 47042678)
19. M.F. Kanninen An augmented double cantilever beam model for studying crack propagation and arrest International Journal of Fracture 9 1973 83 91
20. A. Klarbring Derivation of the adhesively bonded joints by the asymptotic expansion method International Journal of Engineering Science 29 1991 493 512 (Pubitemid 21651740)
21. D. Leguillon Strength or toughness? A criterion for crack onset at a notch European Journal of Mechanics A/Solids 21 2002 61 72 (Pubitemid 34237283)
22. D. Leguillon, J. Laurencin, and M. Dupeux Failure initiation in an epoxy joint between two steel plates European Journal of Mechanics A/Solids 22 2003 509 524
23. S. Lenci Analysis of a crack at a weak interface International Journal of Fracture 108 2001 275 290 (Pubitemid 32277307)
24. C.K.Y. Leung, and Y. Yang Energy-based modelling approach for debonding of FRP plate from concrete substrate Journal of Engineering Mechanics-ASCE 132 2006 583 593 (Pubitemid 43733064)
25. C. Mazzotti, M. Savoia, and B. Ferracuti A new single-shear set-up for stable debonding of FRP-concrete joints Construction and Building Materials 23 2009 1529 1537
26. H. Neuber Theory of Notch Stresses 1958 Springer-Verlag Berlin
27. V. Novozhilov On a necessary and sufficient condition for brittle strength Prikladnaya Matematika i Mekhanika 33 1969 212 222
28. N. Pugno, and R. Ruoff Quantized fracture mechanics Philosophical Magazine 84 2004 2829 2845
29. O. Rabinovitch Fracture-mechanics failure criteria for RC beams strengthened with FRP strips - a simplified approach Composite Structures 64 2004 479 492 (Pubitemid 38572623)
30. J.R. Rice Elastic fracture mechanics concepts for interfacial cracks ASME Journal of Applied Mechanics 55 1988 98 103 (Pubitemid 18590050)
31. J.R. Rice, and G.C. Sih Plane problems of cracks in dissimilar media ASME Journal of Applied Mechanics 32 1965 418 423
32. R.O. Ritchie, J.F. Knott, and J.R. Rice On the relation between critical tensile stress and fracture toughness in mild steel Journal of the Mechanics and Physics of Solids 21 1973 395 410
33. A. Seweryn A non-local stress and strain energy release rate mixed mode fracture initiation and propagation criteria Engineering Fracture Mechanics 59 1998 737 760 (Pubitemid 28392597)
34. Z. Suo, and J.W. Hutchinson Interface crack between two elastic layers International Journal of Fracture 43 1990 1 18 (Pubitemid 21668222)
35. L. Távara, V. Mantič, E. Graciani, J. Cañas, and F. París Analysis of a crack in a thin adhesive layer between orthotropic materials: an application to composite interlaminar fracture toughness test Computer Modeling in Engineering and Sciences 58 2010 247 270
36. L. Távara, V. Mantič, E. Graciani, and F. París BEM analysis of crack onset and propagation along fiber-matrix interface under transverse tension using a linear elastic-brittle interface model Engineering Analysis with Boundary Elements 35 2011 207 222
37. D. Taylor The Theory of Critical Distances: A New Perspective in Engineering Fracture Mechanics 2007 Elsevier Oxford
38. D. Taylor, P. Cornetti, and N. Pugno The fracture mechanics of finite crack extension Engineering Fracture Mechanics 72 2005 1021 1038
39. O. Volkersen Die Nietkraftverteilung in Zugbeanspruchten Nietverbindungen mit Konstanten Laschen-querschnitten Luftfahrtforschung 1938 15:4 47
40. Weißgraeber, P.; Becker, W.; 2011. Predicting effective strengths of bonded lap joints with a finite fracture mechanics criterion. In: Fæster, S.; Juul Jensen, D.; Ralph, B.; Sørensen, B.F. (Eds.). Proceedings of the 32nd Risø International Symposium in Materials Science "Composite materials for structural performance: Towards higher Limits". Technical University of Denmark, 5-9 September 2011, 479-486.
41. M.L. Williams The stress around a fault or crack in dissimilar media Bulletin of the Seismological Society of America 1959 49:199 204
42. H. Yuan, J.G. Teng, R. Seracino, Z.S. Wu, and J. Yao Full-range behaviour of FRP-to-concrete bonded joints Engineering Structures 2004 26: 553 565