Age hardening response of an Al/TiC hot pressed multi-layered composite: Influence on corrosion

Journal of Composite Materials

Volumn 46, Issue 4, 2012, Pages 471-481

  Dikici, Burak ^a  

^a YUZUNCU YIL UNIVERSITY   (Turkey)

Author keywords

age hardening; Al Cu; corrosion; MMC; Multi layered composites; TiC particle

Indexed keywords

AGING TIME; AL-CU; COMPOSITE LAYER; HARDENING RESPONSE; HOT PRESSING METHOD; METAL MATRIX COMPOSITES; MIDDLE LAYER; MMC; MULTI-LAYERED; OIL BATHS; PEAK HARDNESS; PITTING SUSCEPTIBILITY; PREFERENTIAL CORROSION; TIC PARTICLES; VICKERS MICROHARDNESS TESTS; XRD;

AGE HARDENING; ALUMINUM; CORROSION; CORROSION RESISTANCE; HARDNESS; HOT PRESSING; METALLIC MATRIX COMPOSITES; TITANIUM CARBIDE;

NANOCOMPOSITE FILMS;

EID: 84856705879     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998311418548     Document Type: Article

References (45)

1. Dikici B, Gavgali M, Tekmen C. Corrosion behavior of an artificially aged (T6) Al-Si-Mg based metal matrix composite. J Compos Mater. 2006 ; 40 (14). 1259-1269 (Pubitemid 43996627)
2. Bedir F. Characteristic properties of Al-Cu-SiCp and Al-Cu-B4Cp composites produced by hot pressing method under nitrogen atmosphere. Mater Des. 2007 ; 28: 1238-1244 (Pubitemid 44817458)
3. da Silva Antonio AM, dos Santos Jorge F, Strohaecker Telmo R. Microstructural and mechanical characterisation of a Ti6Al4V/TiC/10p composite processed by the BE-CHIP method. Compos Sci Technol. 2005 ; 65 (11-12). 1749-1755
4. Huda MD, Hashmi MSJ, El-Baradie MA. MMCs: Materials, manufacturing and mechanical properties. Key Eng Mater. 1995 ; 104-107: 37-64
5. Lloyd DJ, Jin I. Melt processed aluminum matrix particle reinforced composites. Compre Compos Mater. 2000 ; 3: 555-577
6. Peng LM, Li H, Wang JH. Processing and mechanical behavior of laminated titanium-titanium tri-aluminide (Ti-Al3Ti) composites. Mater Sci Eng A. 2005 ; 406 (1-2). 309-318 (Pubitemid 41472146)
7. Jihong S, Takahiro I, Kazuo U. Multilayer Al2O3/SiC ceramics with improved mechanical behaviour. J Eur Ceram Soc. 2000 ; 20 (11). 1771-1775
8. Shen YL, Suresh S. Steady-state creep of metal-ceramic multilayered materials. Acta Mater. 1996 ; 44 (4). 1337-1348 (Pubitemid 126373004)
9. Hwu KL, Derby B. Fracture of metal/ceramic laminates-II. Crack growth resistance and toughness. Acta Mater. 1999 ; 47 (2). 545-563
10. Zhu H PhD Dissertation. University of Florida ; 1999: 1-5.
11. Liu G, Zhu D, Shang JK. Temperature dependence of fracture toughness in TiC-particulate reinforced Ti-1b6Al-1b4V matrix composite. Scr Metall. 1993 ; 28 (6). 729-732 (Pubitemid 23642062)
12. Konitzer DG, Loretto MH. Microstructural assessment of Ti6Al4V-TiC metal-matrix composite. Acta Metall. 1989 ; 37 (2). 397-406
13. Gavgali M, Dikici B, Bedir F. Corrosion susceptibilities of Al-Cu/TiC MMCs fabricated by conventional hot pressing. Ind J Eng Mater Sci. 2007 ; 14: 303-308
14. Aashish R, David JH, Kenneth SV, Kenneth PH. Resistance-curve and fracture behavior of Ti-Al3Ti metallic-intermetallic laminate (MIL) composites. Acta Metall. 2003 ; 51 (10). 2731-3036
15. Tiezheng L, Grignon F, Benson DJ, Vecchio KS, Olevsky EA, Jiang F, et al. Modeling the elastic properties and damage evolution in Ti-Al3Ti metal-intermetallic laminate (MIL) composites. Mater Sci Eng A. 2004 ; 374 (1-2). 10-26 (Pubitemid 38728260)
16. Srivatsan TS, Ibrahim IA, Mohamed FA, Lavernia EJ. Processing techniques for particulate-reinforced aluminium metal matrix composites. J Mater Sci. 1991 ; 26: 5965-5978
17. Bedir F. Fabrication of two-layered Al-B4C composites by conventional hot pressing under nitrogen atmosphere and their characterization. J Mech Sci Technol. 2006 ; 20 (7). 1002-1011 (Pubitemid 44326639)
18. KayaG. Mechanical Properties of PM Al-SiC composites produced by conventional hot-pressing method. Master Thesis, Middle East Technical University, 1999, 1-80.
19. Tsangaraki-Kaplanoglou I, Theohari S, Dimogerontakis T, Yar-Ming W, Hong-Hsiang (Harry) K, Sheila K. Effect of alloy types on the anodizing process of aluminium. Surf Coat Technol. 2006 ; 200: 2634-2641 (Pubitemid 43079144)
20. Trowsdale AJ, Noble B, Haris SJ, Gibbins ISR, Thompson GE, Wood GC. The influence of silicon carbide reinforcement on the pitting behaviour of aluminium. Corros Sci. 1996 ; 38 (2). 177-191 (Pubitemid 126398232)
21. Gavgali M, Dikici B, Tekmen C. The effect of SiCp reinforcement on the corrosion behaviour of Al based metal matrix composites. Corros Rev. 2006 ; 24 (1-2). 27-37
22. Trzaskoma PP, McCafferty E, Crowe CR. Corrosion behavior of SiC/Al metal matrix composites. J Electrochem Soc. 1983 ; 130 (9). 1804-1809 (Pubitemid 13604465)
23. Dikici B, Kiyak T, Tekmen C, Gavgali M. SEM observations on the porosity activities during corrosion of Al-Si-Mg/SiCp metal matrix composites. Mater Sci Ind J. 2007 ; 3 (1). 8-12
24. Fratila-Apachitei LE, Terryn H, Skeldon P, Thompson GE, Duszczyk J, Katgerman L. Influence of substrate microstructure on the growth of anodic oxide layers. Electrochim Acta. 2004 ; 49 (7). 1127-1140
25. Dikici B, Bedir F, Gavgali M, Kiyak T. Corrosion characteristics of Al-Cu/B4C (T6) MMCs and their microstructure evaluaton. Kovove Mater. 2009 ; 47 (5). 317-323
26. Dikici B, Gavgali M, Bedir F. Synthesis of in-situ TiC nanoparticles in liquid aluminum: The effect of sintering temperature. J Compos Mater. 2011 ; 45 (8). 895-900
27. Tekmen C, Cocen U. The effect of Si and Mg on age hardening behaviour of Al-SiCp composites. J Compos Mater. 2003 ; 37 (20). 1791-1800
28. Bedir F, Ögel B. TiC ve SiC Katkili Kompozitlerin Azot Atmosferi Altinda Sicak Preslenmesi. 10. Uluslararasi Metalurji ve Malzeme Kongresi Bildiriler Kitabi. Istanbul. 2000 ; 3: 1713-1721
29. Kim SW, Lee UJ, Han SW, Kim DK, Ogi K. Heat treatment and wear characteristics of Al/SiCp composites fabricated by duplex process. Composites Part B. 2003 ; 34: 737-745
30. Salvador MD, Amigó V, Martinez N, Busquets DJ. Microstructure and mechanical behaviour of Al-Si-Mg alloys reinforced with Ti-Al intermetallics. J Mater Process Technol. 2003 ; 143-144: 605-611
31. Das T, Munroe PR, Bandyopadhyay S. Effect of Al2O3 Particulates on the Precipitation Behavior of 6061 aluminum-matrix composites. J Mater Sci. 1996 ; 31 (20). 5351-5361 (Pubitemid 126709871)
32. McIntyre JF, Conrad RK, Golledge SL. The effect of heat treatment on the pitting behaviour of SiCw/AA2124. Corrosion. 1990 ; 46 (11). 902-905
33. De Salazar JMG, Urena A, Manzanedo S, Barrena MI. Corrosion behaviour of AA6061 and AA7005 reinforced with Al2O3 particles in aerated 3.5% chloride solutions: Potentiodynamic measurements and microstructure evaluation. Corros Sci. 1999 ; 41: 529-545 (Pubitemid 29278133)
34. Turnbull A. Review of corrosion studies on aluminium metal matrix composites. Br Corros J. 1992 ; 27 (1). 27-35
35. Hollingsworth EH, Hunsicker YH Corrosion of aluminum and aluminum alloys. Ohio/USA: ASM Handbook ; 1987: 583-609.
36. Lucas KA, Clarke H Corrosion of aluminium-based metal matrix composites. England: Research Studies Pres Ltd ; 1993: 1-137.
37. Talbot D, Talbot J Editor: Brain Ralph. Boca Raton, Fl: CRC Press LLC ; 1998 :
38. YaghmaeeMSKaptayG. On the stability range of SiC in ternary liquid Al-Si-Mg alloy. Materials Worlds: Proceedings of Hungarian Materials Science Society 2001; 2(3), e-journal with ISSN 1586-0140, from http://materialworld.fw. hu.
39. Hihara LH, Latanision RM. Galvanic corrosion of aluminum-matrix composites. Corrosion. 1992 ; 48 (7). 546-552 (Pubitemid 23558320)
40. Kiourtsidis G, Skolianos SM. Corrosion behavior of squeeze-cast silicon carbide-2024 composites in aerated 3.5 wt.% sodium chloride. Mater Sci Eng A. 1998 ; 248: 165-172 (Pubitemid 28444308)
41. Galvele JR. Tafel's law in pitting corrosion and crevice corrosion susceptibility. Corros Sci. 2005 ; 47: 3053-3067
42. Segurado J, Gonzalez C, Llorca J. A numerical investigation of the effect of particle clustering on the mechanical properties of composites. Acta Mater. 2003 ; 51: 2355-2369
43. Ozdemir I, Tekmen C, Toparli M. Recrystallization and particle growth in Al-based SiC particle-reinforced composites. Metallkd. 2003 ; 94 (1). 41-43
44. Trzaskoma PP. Pit morphology of aluminum alloy and silicon carbide/aluminum alloy metal matrix composites. Corrosion. 1990 ; 46 (5). 402-409 (Pubitemid 20707715)
45. Ahmed Z, Abdul Aleem BJ. Degradation of aluminum metal matrix composites in salt water and its control. Mater Des. 2002 ; 23: 173-180 (Pubitemid 34254025)