Measurements and computation of low mass transfer coefficients for FCC particles with ozone decomposition reaction

AIChE Journal

Volumn 58, Issue 3, 2012, Pages 707-729

  Kashyap, Mayank ^a   Gidaspow, Dimitri ^a  

^a Illinois Institute of Technology   (United States)

Author keywords

Clusters and bubbles; Computational fluid dynamics; Core annular regime; Fluidization; Kinetic theory; Sherwood number

Indexed keywords

BUBBLING FLUIDIZED BED; COMPUTATIONAL FLUID; COMPUTATIONAL FLUID DYNAMICS SIMULATIONS; CONVENTIONAL MODELS; CORE-ANNULAR REGIME; FLUID CRACKING CATALYSTS; FLUIDIZED BED REACTORS; LITERATURE DATA; LOW MASS; LOW REYNOLDS NUMBER; OZONE DECOMPOSITION; SHERWOOD NUMBERS; SMALL PARTICLES;

CHEMICAL PLANTS; CHEMICAL REACTORS; COMPUTATIONAL FLUID DYNAMICS; FLUID CATALYTIC CRACKING; FLUIDIZATION; FLUIDIZED BEDS; KINETIC THEORY; OZONE; REYNOLDS NUMBER;

MASS TRANSFER;

EID: 84856602040     PISSN: 00011541     EISSN: 15475905     Source Type: Journal    
DOI: 10.1002/aic.12615     Document Type: Article

References (59)

1. Gunn DJ. Transfer of heat or mass to particles in fixed and fluidized beds. Int J Heat Mass Transfer. 1978; 21: 467-476.
2. Kato K, Kubota H, Wen CY. Mass transfer in fixed and fluidized beds. Chem Eng Progr Symp Series. 1970; 105: 87-99.
3. Zabrodsky SS. Hydrodynamics and Heat Transfer in Fluidized Beds. Cambridge: MIT Press, 1966.
4. Bolland O, Nicolai R. Describing mass transfer in circulating fluidized beds by ozone decomposition. Chem Eng Commun. 2001; 187: 1-21.
5. Chalermsinsuwan B, Piumsomboon P, Gidaspow D. Kinetic theory based computation of PSRI riser: Part II-computation of mass transfer coefficient with chemical reaction. Chem Eng Sci. 2009; 64: 1212-1222.
6. Breault RW. A review of gas-solid dispersion and mass transfer coefficient correlations in circulating fluidized beds. Powder Technol. 2006; 163: 9-17.
7. Breault RW, Guenther CP. Mass transfer in the core-annular and fast fluidization flow regimes of a CFB. Powder Technol. 2009; 190: 385-389.
8. Chalermsinsuwan B, Piumsomboon P, Gidaspow D. Kinetic theory based computation of PSRI riser: Part I-estimation of mass transfer coefficient. Chem Eng Sci. 2009; 64: 1195-1211.
9. Fryer C, Potter OE. Experimental investigation of models for fluidized bed catalytic reactors. AIChE J. 1976; 22: 38-47.
10. Ouyang S, Lin J, Potter OE. Ozone decomposition in a 0.254 m diameter circulating fluidized bed reactor. Powder Technol. 1993; 75: 73-78.
11. Ouyang S, Lin J, Potter OE. Circulating fluidized bed as a catalytic reactor: experimental study. AIChE J. 1995; 41: 1534-1542.
12. Samuelsberg A, Hjertager BH. Simulation of two-phase gas/particle flow and ozone decomposition in a 0.25 m I.D. Riser. In: Serizawa A, Fukano T, Batalille J, editors. Advances in Multiphase Flow. Amsterdam: Elsevier, 1995: 679-688.
13. 3 decomposition in a bubbling fluidized bed. AIChE J. 2003; 49: 2793-2801.
14. Therdthianwong A, Pantaraks P, Therdthianwong S. Modeling and simulation of circulating fluidized bed reactor with catalytic ozone decomposition reaction. Powder Technol. 2003; 133: 1-14.
15. Hansen KG, Solberg T, Hjertager BH. A three-dimensional simulation of gas/particle flow and ozone decomposition in the riser of a circulating fluidized bed. Chem Eng Sci. 2004; 59: 5217-5224.
16. Fan C, Zhang Y, Bi X, Song W, Lin W, Luo L. Evaluation of downer reactor performance by catalytic ozone decomposition. Chem Eng J. 2008; 140: 539-554.
17. van der Vaart DR. Prediction of axial concentration profiles in catalytic fluidized reactors. AIChE J. 1992; 38: 1157-1160.
18. Schoenfelder H, Kyuse M, Werther J. Two-dimensional model for circulating fluidized bed reactors. AIChE J. 1996; 42: 1875-1888.
19. Dong W, Wang W, Li J. A multiscale mass transfer model for gas-solid riser flows: Part 1-Sub-grid model and simple tests. Chem Eng Sci. 2008; 63: 2798-2810.
20. Kashyap M, Gidaspow D. Computation and measurements of mass transfer and dispersion coefficients in fluidized beds. Powder Technol. 2010; 203: 40-56.
21. Frye CG, Lake WC, Eckstrom HC. Gas-solid contacting with ozone decomposition reaction. AIChE J. 1958; 4: 403-408.
22. Jiang P, Bi H, Jean R, Fan L. Baffle effects on performance of catalytic circulating fluidized bed reactor. AIChE J. 1991; 37: 1392-1400.
23. Pagliolico S, Tiprigan M, Rovero G, Gianetto A. Pseudo-homogeneous approach to CFB reactor design. Chem Eng Sci. 1992; 47: 2269-2274.
24. Dhandapani B, Oyama ST. Gas phase ozone decomposition catalysts. Appl Catal B. 1997; 11: 129-166.
25. Gidaspow D. Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions. New York: Academic Press, 1994.
26. Driscoll MC. A study of the fluidization of FCC particles and nanoparticles in a rectangular bed and a riser. Ph.D. Thesis, Illinois Institute of Technology, Chicago, Illinois, 2007.
27. Driscoll MC, Gidaspow D. Wave propagation and granular temperature in fluidized beds of nanoparticles. AIChE J. 2007; 53: 1718-1726.
28. Kashyap M, Gidaspow D, Driscoll M. Effect of electric field on the hydrodynamics of fluidized nanoparticles. Powder Technol. 2008; 183: 441-453.
29. Kashyap M. Measurements and computation of dispersion and mass transfer coefficients in fluidized beds. Ph.D. Thesis, Illinois Institute of Technology, Chicago, Illinois, 2010.
30. Seo YC, Gidaspow D. An x-ray-γ-ray method of measurement of binary solids concentrations and voids in fluidized beds. Ind. Eng. Chem. Res. 1987; 26: 1622-1628.
31. Fogler HS. Elements of Chemical Reaction Engineering. New Jersey: Prentice-Hall, 1999.
32. Levenspiel O. Chemical Reaction Engineering. New York: Wiley, 1999.
33. van Swaaij WPM, Zuiderweg FJ. Investigation of ozone decomposition in fluidized beds on the basis of a two-phase model. Proceedings of the European Symposium on Chemical Engineering. Amsterdam: Elsevier, October 1-5, 1973:B9.25-B9.36.
34. Solbrig CW, Gidaspow D. Convective diffusion in a parallel plate duct with one catalytic wall-laminar flow-first order reaction. Part I-analytical. Can J Chem Eng. 1967; 45: 35-39.
35. Kulacki FA, Gidaspow D. Convective diffusion in a parallel plate duct with one catalytic wall-laminar flow-first order reaction. Part II-experimental. Can J Chem Eng. 1967; 45: 72-78.
36. Bird RB, Stewart WE, Lightfoot EN. Transport Phenomena. New York: Wiley, 2002.
37. Kashyap M, Gidaspow D. Circulation of Geldart D type particles: Part II-low solids fluxes. Measurements and computation under dilute conditions. Chem Eng Sci. 2011; 66: 1649-1670.
38. Kashyap M, Gidaspow D, Koves WJ. Circulation of Geldart D type particles: Part I-high solids fluxes. Measurements and computation under solids slugging conditions. Chem Eng Sci. 2011; 66: 183-206.
39. Gidaspow D, Jiradilok V. Computational Techniques: The Multiphase CFD Approach to Fluidization and Green Energy Technologies (Includes CD-ROM). New York: Nova Science Publishers, 2009.
40. Fluent Inc. Fluent 6.2 User's Guide. New Hampshire: Fluent, 2005.
41. Xie N, Battaglia F, Pannala S. Effects of using two- versus three-dimensional computational modeling of fluidized beds. Part I, hydrodynamics. Powder Technol. 2008; 182: 1-13.
42. Ding J, Gidaspow D. A bubbling fluidization model using kinetic theory of granular flow. AIChE J. 1990; 36: 523-538.
43. Neri A, Gidaspow D. Riser hydrodynamics: simulation using kinetic theory. AIChE J. 2000; 46: 52-67.
44. Fluent Inc. Fluent 6.2 UDF Manual. New Hampshire: Fluent, 2005.
45. Yang N, Wang W, Ge W, Li J. CFD simulation of concurrent-up gas-solid flow in circulating fluidized beds with structure-dependent drag coefficient. Chem Eng J. 2003; 96: 71-80.
46. Yang N, Wang W, Ge W, Wang L, Li J. Simulation of heterogeneous structure in a circulating fluidized-bed riser by combining the two-fluid model with the EMMS approach. Ind Eng. Chem Res. 2004; 43: 5548-5561.
47. Wen CY, Yu YH. Mechanics of fluidization. Chem Eng Prog Symp Series. 1966; 62: 100-111.
48. Johnson PC, Jackson R. Frictional-collisional constitutive relations for granular materials, with application to plane shearing. J Fluid Mech. 1987; 176: 67-93.
49. Gelderbloom S, Gidaspow D, Lyczkowski RW. CFD simulations of bubbling /collapsing fluidized beds for three Geldart groups. AIChE J. 2003; 49: 844-858.
50. van Wachem BGM, Schouten JC, van den Bleek CM, Krishna R, Sinclair JL. Comparative analysis of CFD models of dense gas-solid systems. AIChE J. 2001; 47: 1035-1051.
51. McKeen T, Pugsley T. Simulation and experimental validation of a freely bubbling bed of FCC catalyst. Powder Technol. 2003; 129: 139-152.
52. Weinstein H, Meller M, Shao MJ, Parisi RJ. Radial solid density variation in a fast fluidized bed. AIChE Symp. Series. 1984; 80: 52-59.
53. Hartge EU, Rensner D, Werther J. Solids concentration and velocity patterns in circulating fluidized beds. In Basu P, Large JF, editors. Circulating Fluidized Bed Technology II. Oxford: Pergamon Press, 1988: 165-170.
54. Resnick W, White RR. Mass transfer in systems of gas and fluidized solids. Chem Eng Prog. 1949; 45: 377-390.
55. Chu JC, Kalil J, Wetteroth WA. Mass transfer in a fluidized bed. Chem Eng Prog. 1953; 49: 141-149.
56. Kunii D, Levenspiel O. Fluidization Engineering, 2nd ed. Boston: Butterworth-Heinemann, 1991.
57. Venderbosch RH, Prins W, van Swaaij WPM. Mass transfer and influence of the local catalyst activity on the conversion in a riser reactor. Can J Chem Eng. 1999; 77: 262-274.
58. Li J, Wang L. Concentration distributions during mass transfer in circulating fluidized beds. Presented at the Seventh International Conference on Circulating Fluidized Beds. Niagara Falls, Ontario, Canada, May 5-8, 2002.
59. Subbarao D, Gambhir S. Gas particle mass transfer in risers. Presented at the Seventh International Conference on Circulating Fluidized Beds. Niagara Falls, Ontario, Canada, May 5-8, 2002.