Designing with pores-synthesis and applications

KONA Powder and Particle Journal

Volumn 28, Issue , 2010, Pages 131-142

  Luyten, J ^a   Mullens, S ^a   Thijs, I ^a  

^a FLEMISH INSTITUTE FOR TECHNOLOGICAL RESEARCH VITO   (Belgium)

Author keywords

Applications; Porous materials; Processing

Indexed keywords

APPLICATIONS; CERAMIC MATERIALS; CERAMIC MEMBRANES; CHARACTERIZATION; COATINGS; LIQUID METALS; POROUS MATERIALS; PROCESSING; PROTECTIVE COATINGS; SCAFFOLDS; SCAFFOLDS (BIOLOGY); TISSUE ENGINEERING;

CATALYTIC SUPPORTS; CHARACTERIZATION TECHNIQUES; DIESEL PARTICULATE FILTERS; EMERGING APPLICATIONS; MOLTEN-METAL FILTERS; POROUS INORGANIC MATERIALS; SCAFFOLDS FOR TISSUE ENGINEERING; SUSTAINABLE PROCESSING;

MACROS;

EID: 79952978799     PISSN: 02884534     EISSN: 21875537     Source Type: Journal    
DOI: 10.14356/kona.2010012     Document Type: Review

References (59)

1. Zhao, G. (2006): Novel porous materials for emerging applications, J. Mater. Chem., 16, pp. 623-625.
2. Schaefer, D. (1994): MRS Bulletin, April 1994, p14.
3. Sagio-Woyansky, J., Scott, C. E. and Minnear, W. P. (1992): Am. Ceram. Soc. Bull., 71, pp. 1674-1682.
4. Colombo, P. (2002): Key Engineering Materials, 206-213, pp.1913-1918.
5. Green, D. and Colombo, P. (2003): Cellular ceramics: intriguing structures, novel properties, and innovative applications, MRS Bulletin, 28, pp.296-300.
6. Scheffler, M. and Colombo, P. (Eds)(2005): 'Cellular ceramics. Structures, manufacturing, properties and applications', Wiley-VCH, Weinheim (Germany).
7. Fain, D. (1994): 'Membrane gas separation principles', MRS Bulletin, 4, pp.40-43.
8. Harold, M. et al. (1994): MRS Bulletin, 4, pp.34-39.
9. Burggraaf, A. and Cot, L. (Eds) (1996): 'Fundamentals of inorganic membrane science and technology', Elsevier Science & Technology Amsterdam (The Nederlands).
10. Li, Kang (2007): ' Ceramic membranes for separation and reaction', John Wiley & Sons, Ltd., Chichester (UK).
11. Ashby, M. (1999): Materials selection in mechanical design, Butterworth-Heinemann, Oxford (UK).
12. Colombo, P. (2008): 'In Praise of pores', Science, 322.
13. Vercauteren, S. et al. (1998): Porous ceramic membranes: preparation, transport properties and applications, J. Porous Materials, 5, pp. 241-258.
14. Van Gestel, T. et al. (2002): Alumina and Titania multilayer membranes for nanofiltration: preparation, characterization and chemical stability, J. Membrane Sc., 207, pp. 73-89.
15. Luyten, J. et al. (2008): Pore architecture for a vast range of applications, Adv. Energy Techn. & Environm., Proc. ICC2, Verona (Italy), pp. 309-317.
16. Gibson, L. and Ashby, M. (1999): 'Cellular solids', Cambridge University Press, Cambridge (UK).
17. Banhart, J. (1998): Progr. Mat Sci., 46, pp. 559-632.
18. Studart, A. et al. Gonzenbach, U., Tervoort, E. and Glauckler, L. (2006): J. Am. Ceram. Soc., 89, pp. 1771-1789.
19. Sepulveda, P. and Binner, J. (1999): J. Eur.Ceram.Soc., 19, pp. 2059-2066.
20. Luyten, J. et al. (2005): Strong ceramic foams from polyurethane templates, Adv. Appl. Ceram., 104, pp. 4-8.
21. Thijs, I., Luyten, J. and Mullens, S. (2003): J. Am. Ceram. Soc., 87, pp. 170-172.
22. Greil, P., Lifka, T. and Kaindl, A. (1998): J. Eur. Ceram. Soc., 18, pp. 1961-1963.
23. Colombo, P. (2006): Conventional and novel process-ing methods for cellular ceramic, Phil. Trans. R. Soc. A, 364, pp. 109-124.
24. Lewis, J. et al. (2006) Direct Ink writing of threedimensional ceramic structures, J. Am. Ceram. Soc., 2006, 89 [12], pp. 3599-3609.
25. Sigmund, W., Bell, N. and Bergstrom, L. (2000): Novel powder-processing methods for advanced ceramics, J. Am. Ceram. Soc., 83 [7], pp. 1557-1574.
26. Luyten, J. et al. (2009):Different methods to synthesize ceramic foams, J. Eur. Ceram. Soc, 29, pp. 829-832.
27. Buysse, C. et al. (2010): Fabrication and oxygen permeability of gastight, macrovoid-free Ba0.5 Sr0.5 Co0.8 Fe0.2 O3-δ capillaries for high temperature gas separation, J. Membr. Sci., 359, pp. 86-92.
28. Mullens, S., Luyten, J. and Zeschky, J. (2005): In Cellular Ceramics (Eds. M. Scheffler and P. Colombo), Chapter 3, Characterization of structure and morphology, pp. 227-266, Wiley-VCH, Weinheim (Germany).
29. Bhave, R. (1991): 'Inorganic membranes, synthesis, characteristics and application.' Ed. Van Nostrand-Rheinhold, New York (USA).
30. Rombouts, M. et al. (2009): The production of Ti-6Al-4V parts with controlled porous architecture by threedimensional fiber deposition, Proc. VRAP Conf. (Eds. Taylor& Francis), Leira, Portugal, pp.453-457.
31. Nuyts, P. et al. (2010): The 3D fiber deposition technique for producing porous periodic metals and ceramics, Proceed. ISuP-2010 conference April 19-21, Bruges (Belgium).
32. Luyten, J. et al. (2000): Processing of multi-layer ceramic nanofiltration membranes, Ceramic transactions, 15, pp. 551-562.
33. Weyten, H. et al. (1997): Dehydrogenation of propane using a packed-bed catalytic membrane reactor, AICE Journal, 43(7), pp. 1819-1827.
34. 3-δmembranes, Solid State Ionics, 135, pp. 637-642.
35. Mulder, M. (1996): Basic principles of membrane technology, Kluwer Academic Publ. Dordrecht (The Nederlands).
36. Ryan, G., Pandit, A. and Aptsidis, D. (2006): Fabrication methods of porous metals for use in orthopaedic applications, Biomaterials, 27, pp. 2651-2670.
37. Li, J. et al. (2006): Porous Ti6Al4V scaffold directly fabricating by rapid prototyping: preparation and in vitro experiment, Biomaterials, 27, pp. 1223-1235.
38. Cachinho, S. and Correia, R. (2006): Titanium Scaffolds for osteointegration: mechanical, in vitro and corrosion behavior, J. Mater. Sci. Mater. Med., 19, pp. 2331-2339.
39. Bakker, A. et al. (2008): Quantitative screening of engineered implants in a long bone defect model in rabbits, Tissue Engineering Part C Methods, 14(3), pp. 251-260.
40. Ravelingien, M. et al. (2009): Thermal decomposition of bioactive sodium titanate surfaces, Applied Surface Science, 255, pp. 9539-9542.
41. Impens, S. et al. (2008): Production and Characterization of porous calcium phosphate structures with controllable hydroxyapatite/beta tricalcium phosphate ratios, Adv. Ceram., 108, pp. 494-500.
42. Brar, H. et al. (2009): Magnesium as a biodegradable and bioabsorbable material for medical implants, Biomedical materials and devices, 61(9).
43. Staiger, M. et al. (2006): Magnesium and its alloys as orthopaedic biomaterials: a Review, Biomaterials, 27, pp. 1728-1734.
44. Luyten, J. et al. (2008): Porous scaffold design for bone replacement, Oral Contr. Bioceramics, Biotech. Health Proceed. ICC2, Verona (Italy), pp. 1-6.
45. Pitsch, A. et al. (2005): New experimental approach in the search of intermetallic compounds for Fe, Mn, and Si removal in aluminium recycling, Light Metals 2005, pp. 1191-1195.
46. Instone, S. et al. (2005): Development of molten metal filtration technology for aluminium, Light Metals 2005, pp. 933-938.
47. Le Brun, P. et al. (2007): Removal of intermetallic particles for the purification of aluminum alloys, Light Metals 2007, Ed. Morten Sorlie, TMS 2007, pp. 657-664.
48. Osumi, K. et al. (2000): Development of new filter for the removal of non-metallic inclusions from the molten aluminium, Proc. of the fourth international symposium on Recycling of Metals and engineered materials, TMS 2000.
49. Pyzik, A. and Li, C. (2005): New design of ceramic filter for diesel control applications, Int. J. Appl. Ceram. Technol., 2(6), pp. 440-454.
50. Miyakawa, et al. (2003): Characteristics of Reaction-Bonded Porous Silicon Nitride Honeycomb for DPF Substrate, JSAE Review, 24, pp. 269-276.
51. Alkemade, U. et al. (2006): Engines and exhaust aftertreatment systems for future automotive applications, Solid State Ionics, 177(26-32), pp. 2291-2296.
52. Ogunwumi, S. et al. (2005): Aluminium titanate compositions for diesel particulate filters, SAE 2005-01-0583.
53. Adler, J.(2005): Ceramic diesel particulate filters, Int. J. Appl. Ceram. Technol., 2(6), pp. 429-439.
54. Cutler, W. et al. (2000): A new high temperature ceramic material for diesel particulate filter applications, SAE 2000-01-2844.
55. Cutler, W. (2004): Overview for ceramic materials for diesel particulate filter applications, Ceram. Eng. Sci. Proc., 25(3), pp. 421-430.
56. Binner, J. et al. (2004): Gel cast foam diesel particulate filters, Key Engineering Mat., 264-268(1-3), pp. 2231-2234.
57. Görsmann, C. et al. (2005): Catalytic coatings for active and passive diesel particulate filter regeneration, Monatshefte für Chemie, 136, pp. 91-105.
58. Fino, D. (2007): Diesel emission control: catalytic filters for particulate removal, Science & Techn. Adv. Mat., 8, pp. 93-100.
59. Adler, J. (2008): Ceramic Diesel Particulate filters-status and trends, Ceramics for Environment., Proceed. ICC2 2008, Verona (Italy), pp. 439-448