The effect of modified TiO 2 nanoparticles on the polyethersulfone ultrafiltration hollow fiber membranes

Desalination

Volumn 287, Issue , 2012, Pages 271-280

  Razmjou, Amir ^a   Resosudarmo, Adhikara ^a   Holmes, Rohan L ^a   Li, Hongyu ^a   Mansouri, Jaleh ^a,b   Chen, Vicki ^a  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

^b Department of Civil and Environmental Engineering   (Australia)

Author keywords

Fouling; Functionalized nanoparticles; Hollow fiber nanocomposite membrane; Polyethersulfone; TiO 2 nanoparticles

Indexed keywords

CHEMICALLY MODIFIED; EFFECT OF CHEMICALS; FLAT SHEET MEMBRANES; FLUX RECOVERY; FUNCTIONALIZED NANOPARTICLES; HOLLOW FIBER; HOLLOW FIBER MEMBRANES; IN-FIBER; INITIAL PERMEABILITY; MEMBRANE FABRICATION PROCESS; MEMBRANE RESISTANCE; MEMBRANE SEPARATION; OUTER LAYER; POLYETHERSULFONES; PURE WATER; TIO; TITANIA NANOPARTICLES;

AGGLOMERATION; CHEMICAL MODIFICATION; ELASTICITY; ETHERS; FOULING; MEMBRANES; TITANIUM DIOXIDE; ULTRAFILTRATION;

NANOPARTICLES;

CHEMICAL PROPERTY; MECHANICAL PROPERTY; MEMBRANE; PERFORMANCE ASSESSMENT; PERMEABILITY; ULTRAFILTRATION;

EID: 84856579627     PISSN: 00119164     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.desal.2011.11.025     Document Type: Article

References (43)

1. Yan L., Li Y.S., Xiang C.B., Xianda S. Effect of nano-sized Al2O3-particle addition on PVDF ultrafiltration membrane performance. J. Membr. Sci. 2006, 276:162-167.
2. Yu L.-Y., Xu Z.-L., Shen H.-M., Yang H. Preparation and characterization of PVDF-SiO2 composite hollow fiber UF membrane by sol-gel method. J. Membr. Sci. 2009, 337:257-265.
3. Jian P., Yahui H., Yang W., Linlin L. Preparation of polysulfone-Fe3O4 composite ultrafiltration membrane and its behavior in magnetic field. J. Membr. Sci. 2006, 284:9-16.
4. Bottino A., Capannelli G., Comite A. Preparation and characterization of novel porous PVDF-ZrO2 composite membranes. Desalination 2002, 146:35-40.
5. 2 nanoparticles on the surface chemistry, structure and fouling performance of PES ultrafiltration membranes. J. Membr. Sci. 2011, 378:73-84.
6. 2 nanoparticles on fouling mitigation of ultrafiltration membranes for activated sludge filtration. J. Membr. Sci. 2005, 249:1-8.
7. 2 nanoparticle size on the performance of PVDF membrane. Appl. Surf. Sci. 2006, 253:2003-2010.
8. Diebold U. The surface science of titanium dioxide. Surf. Sci. Rep. 2003, 48:53-229.
9. 2 nanoparticles on the surface morphology and performance of microporous PES membrane. Appl. Surf. Sci. 2009, 255:4725-4732.
10. Shin S.-J., Kim J.-P., Kim H.-J., Jeon J.-H., Min B.-R. Preparation and characterization of polyethersulfone microfiltration membranes by a 2-methoxyethanol additive. Desalination 2005, 186:1-10.
11. Zhao Z.-P., Wang Z., Wang S.-C. Formation, charged characteristic and BSA adsorption behavior of carboxymethyl chitosan/PES composite MF membrane. J. Membr. Sci. 2003, 217:151-158.
12. Xu Z.-L., Alsalhy Qusay F. Polyethersulfone (PES) hollow fiber ultrafiltration membranes prepared by PES/non-solvent/NMP solution. J. Membr. Sci. 2004, 233:101-111.
13. Chaturvedi B.K., Ghosh A.K., Ramachandhran V., Trivedi M.K., Hanra M.S., Misra B.M. Preparation, characterization and performance of polyethersulfone ultrafiltration membranes. Desalination 2001, 133:31-40.
14. Boussu K., Vandecasteele C., Van der Bruggen B. Study of the characteristics and the performance of self-made nanoporous polyethersulfone membranes. Polymer 2006, 47:3464-3476.
15. 2 nanoparticles. Appl. Surf. Sci. 2005, 249:76-84.
16. 2 photo-catalyst: Performance, characterization and fouling-resistant capability. J. Membr. Sci. 2009, 330:297-306.
17. 2 nanoparticles with UV irradiation for modification of polyethersulfone ultrafiltration membranes. J. Membr. Sci. 2008, 313:158-169.
18. Razmjou A., Mansouri J., Chen V., Lim M., Amal R. Titania nanocomposite polyethersulfone ultrafiltration membranes fabricated using a low temperature hydrothermal coating process. J. Membr. Sci. 2011, 380:98-113.
19. 2 composite membranes. Appl. Surf. Sci. 2008, 254:7080-7086.
20. 2 nanoparticles by a sol-gel process. J. Mater. Process. Technol. 2006, 172:431-436.
21. Pukanszky B., Fekete E. Aggregation tendency of particulate fillers: determination and consequences. Polym. Polym. Compos. 1998, 6:313-322.
22. Rong M.Z., Zhang M.Q., Ruan W.H. Surface modification of nanoscale fillers for improving properties of polymer nanocomposites: A review. Mater. Sci. Technol. 2006, 22:787-796.
23. Gun'Ko V.M., Voronin E.F., Pakhlov E.M., Zarko V.I., Turov V.V., Guzenko N.V., Leboda R., Chibowski E. Features of fumed silica coverage with silanes having three or two groups reacting with the surface. Colloids Surf., A Physicochem. Eng. Asp. 2000, 166:187-201.
24. Jiang L.Y., Chung T.S., Cao C., Huang Z., Kulprathipanja S. Fundamental understanding of nano-sized zeolite distribution in the formation of the mixed matrix single- and dual-layer asymmetric hollow fiber membranes. J. Membr. Sci. 2005, 252:89-100.
25. Yuliwati E., Ismail A.F., Matsuura T., Kassim M.A., Abdullah M.S. Effect of modified PVDF hollow fiber submerged ultrafiltration membrane for refinery wastewater treatment. Desalination 2011, 283:214-220.
26. Han L.F., Xu Z.L., Yu L.Y., Wei Y.M., Cao Y. Performance of PVDF/Multi-nanoparticles composite hollow fibre ultrafiltration membranes. Iran. Polym. J. (English Edition) 2010, 19:553-565.
27. 2 composite PVdF/LiPF6 solid membranes. Solid State Ionics 2004, 175:631-635.
28. 2 sol-gel method and blending method. J. Appl. Polym. Sci. 2009, 113:1763-1772.
29. 2-polyimide hollow fiber membranes. Chem. Eng. Sci. 2006, 61:6228-6233.
30. Dong G., Li H., Chen V. Factors affect defect-free Matrimid® hollow fiber gas separation performance in natural gas purification. J. Membr. Sci. 2010, 353:17-27.
31. Liu T., Xu S., Zhang D., Sourirajan S., Matsuura T. Pore size and pore size distribution on the surface of polyethersulfone hollow fiber membranes. Desalination 1991, 85:1-12.
32. 2. Mater. Chem. Phys. 2007, 105:162-168.
33. Chiang C.-H., Ishida H., Koenig J.L. The structure of [gamma]-aminopropyltriethoxysilane on glass surfaces. J. Colloid Interface Sci. 1980, 74:396-404.
34. 2 nanoparticles and their conjugation with streptavidin. Langmuir 2007, 23:5630-5637.
35. 2 powders by thermal hydrolysis of Ti(SO4)2. J. Am. Ceram. Soc. 1996, 79:2727-2732.
36. Deng C., James P.F., Wright P.V. Poly(tetraethylene glycol malonate)-titanium oxide hybrid materials by sol-gel methods. J. Mater. Chem. 1998, 8:153-159.
37. 2 polymer-matrix nanocomposites. Compos. Sci. Technol. 2009, 69:1880-1886.
38. Chen Y., Zhou S., Yang H., Gu G., Wu L. Preparation and characterization of nanocomposite polyurethane. J. Colloid Interface Sci. 2004, 279:370-378.
39. Blackwood K., Pethrick R., Simpson F., Day R., Watson C. Titanium dioxide induced failure in polycarbonate. J. Mater. Sci. 1995, 30:4435-4445.
40. Kuo S.-W., Chang F.-C. Significant thermal property and hydrogen bonding strength increase in poly(vinylphenol-co-vinylpyrrolidone) copolymer. Polymer 2003, 44:3021-3030.
41. Nair R., Nyamweya N., Gönen S., Martínez-Miranda L.J., Hoag S.W. Influence of various drugs on the glass transition temperature of poly(vinylpyrrolidone): a thermodynamic and spectroscopic investigation. Int. J. Pharm. 2001, 225:83-96.
42. Bansal A., Yang H., Li C., Cho K., Benicewicz B.C., Kumar S.K., Schadler L.S. Quantitative equivalence between polymer nanocomposites and thin polymer films. Nat. Mater. 2005, 4:693-698.
43. 2 nanocomposites formed by sol-gel process. Compos. B Eng. 2004, 35:219-222.