Influence of an oxidation of the carbon fiber surface on the adhesion strength in carbon fiber-acrylate composites cured by electron beam

International Journal of Adhesion and Adhesives

Volumn 34, Issue , 2012, Pages 93-106

  Vautard, F ^a,b   Fioux, P ^a   Vidal, L ^a   Schultz, J ^a   Nardin, M ^a   Defoort, B ^b  

^a UNIVERSITÉ DE HAUTE ALSACE   (France)

^b AIRBUS GROUP INNOVATIONS   (Germany)

Author keywords

Cure hardening; Fibers; Interphases; Surface treatment

Indexed keywords

ACRYLATE RESIN; CURE/HARDENING; ELECTRON BEAM CURING; FIBER SURFACE; INTERFACIAL SHEAR STRENGTH; INTERPHASES; MATRIX; NANOMETRIC SCALE; POLAR COMPONENTS; PULL-OUT TEST; UV-CURING;

BOND STRENGTH (MATERIALS); CARBON FIBERS; ELECTRON BEAMS; FIBERS; OXIDATION; SURFACE CHEMISTRY; SURFACE PROPERTIES; SURFACE TREATMENT; X RAY PHOTOELECTRON SPECTROSCOPY;

CURING;

EID: 84856487113     PISSN: 01437496     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijadhadh.2011.11.006     Document Type: Article

References (79)

1. A. Chapiro Radiation chemistry of polymeric systems high polymers 1962 Interscience New York
2. Brenner W, Oliver W. Commercial aspect of instantaneous radiation cure of reinforced plastics. In: Proceedings the of 22nd annual conference of the society of plastics industry, reinforced plastics division; 1967.
3. Parrot P. Electron beam curing at Aerospatiale. In: Proceedings of the 44th international SAMPE symposium conference; May 2327, 1999. p. 13548.
4. C.B. Saunders, L.W. Dickson, A. Singh, A.A. Charmichael, and V.J. Lopata Radiation-curable carbon fiber prepeg composites Polym Compos 9 1988 389 394
5. C.B. Saunders, A.A. Charmichael, W. Kremers, V.J. Lopata, and A. Singh Radiation-curable prepeg composites Polym Compos 12 1991 91 95
6. J.V. Crivello, T.C. Walton, and R. Malik Fabrication of epoxy matrix composites by electron beam induced cationic polymerization Chem Mater 9 1997 1273 1284 (Pubitemid 127471445)
7. J.V. Crivello Advanced curing technologies using photo- and electron beam induced cationic polymerization Radiat Phys Chem 63 2002 21 27 (Pubitemid 33132150)
8. J.V. Crivello UV and electron beam-induced cationic polymerization Nucl Instrum Methods Phys Res Sect B 151 1999 8 21
9. X.C. Huang, M.W. Shi, G.T. Zhou, H. Zhou, X.P. Hao, and C.L. Zhou Investigation on the electron-beam curing of vinylester resin Radiat Phys Chem 77 2008 643 655
10. X.C. Huang, X.L. Wang, X.P. Hao, B.Y. Wang, and G.T. Zhou Study on the EB irradiated vinylester resin by Positron Annihilation Lifetime Spectroscopy (PALS) J Polym Eng 28 2008 349 368
11. A. Singh, and C. Saunders Radiation processing of carbon fiber-acrylated epoxy composites A. Singh, J. Silverman, Radiation processing of polymers 1992 Hanser Publishers New York
12. J.M. Sands, B.K. Fink, S.H. Mcknight, C.H. Newton, J.W. Gillepsie Jr, and G.R. Palmese Environmental issues for polymer matrix composites and structural adhesives Clean Prod Processes 2 2001 228 235
13. J. Raghavan Evolution of cure, mechanical properties, and residual stress during electron beam curing of a polymer composite Compos Part A 40 2009 300 308
14. Janke CJ, Dorsey GH, Havens SJ, Lopata VJ. Toughened epoxy resins cured by electron beam radiation. In: Proceedings of the 28th international SAMPE technical conference; November 47, 1996. p. 87789.
15. A.J. Berejka, and C. Eberle Electron beam curing of composites in North America Radiat Phys Chem 63 2002 551 556 (Pubitemid 34226803)
16. T. Glauser, A. Hult, M. Johansson, X. Kornmann, and L. Berglund Toughening of electron beam cured acrylate resins Macromol Mater Eng 280/281 2000 20 25
17. Defoort B, Chauray E, Vautard F, Ponsaud P, Nardin M, Schultz J, et al. Improvement of mechanical properties of acrylate based EB cured composite materials. In: Proceedings of the international SAMPE conference, Long Beach, California, USA; May 2005.
18. Krzeminski M, Defoort B, Coqueret X. Nanoscale toughening for advanced composite matrices cured by electron beam activation. In: Proceedings of the 2nd international carbon composites conference, Arcachon, France; October 2729, 2009.
19. Kreminski M, Defoort B, Coqueret X. Nanoscale toughened matrices cured under electron beam activation for high performance composite applications. In: Proceedings of the international SAMPE conference, Seattle, USA; May 2010.
20. J. Schultz, and M. Nardin Interfacial adhesion, interphase formation and mechanical properties of single fiber polymer based composites H. Ishida, Controlled interphases in composites materials 1990 Elsevier New York 561 567
21. J. Schultz, and M. Nardin Some physico-chemicals aspects of the fibrematrix interphase in composite materials J Adhes 45 1994 59 71
22. M. Nardin, E.M. Asloun, and J. Schultz Physico-chemical interactions between carbon fibers and PEEK H. Ishida, Controlled interphases in composite materials 1990 Elsevier New York 285 293
23. C.W. Jennings Surface roughness and bond strength of adhesives J Adhes 4 1972 25 38
24. L.T. Drzal, N. Sugiura, and D. Hook The role of chemical bonding and surface topography in adhesion between carbon fibers and epoxy matrices Compos Interface 5 1997 337 354 (Pubitemid 127670675)
25. V.K. Raghavendran, L.T. Drzal, and P. Askeland Effect of surface oxygen content and roughness on interfacial adhesion in carbon fiber-polycarbonate composites J Adhes 16 2002 1283 1306 (Pubitemid 34806709)
26. D.K. Owens, and R.C. Wendt Estimation of the surface free energy of polymers J Appl Polym Sci 13 1969 1741 1747
27. F.M. Fowkes Role of acidbase interfacial bonding in adhesion J Adhes Sci Technol 1 1987 7 27
28. F.M. Fowkes Acidbase contribution to polymerfiller interactions Rubber Chem Technol 57 1984 328
29. J. Schultz, L. Lavielle, and C. Martin The role of the interface in carbon-fiber epoxy composites J Adhes 23 1987 45 60
30. K.J. Hook, R.K. Agrawal, and L.T. Drzal Effects of microwave processing on fibermatrix adhesion. 2. Enhanced chemical bonding epoxy to carbon-fibers J Adhes 32 1990 157 170
31. E. Pisanova, and E. Mäder Acidbase interaction and covalent bonding at a fibermatrix interface: contribution to the work of adhesion and measured adhesion strength J Adhes Sci Technol 14 2000 415 436 (Pubitemid 32212536)
32. J.J. Bikerman The science of adhesive joints 1961 Academic Press New York
33. M.M. Pastor-Blas, M.S. Sanchez-Adsuar, and J.M. Martin-Martinez Weak boundary layers in styrenebutadiene rubber J Adhes 50 1995 191 210
34. M.C. Paiva, M. Nardin, C.A. Bernardo, and J. Schultz Influence of thermal history on the results of fragmentation tests on high-modulus carbon-fiber/polycarbonate model composites Compos Sci Technol 57 1997 839 843
35. F. Vautard, L. Xu, and L.T. Drzal Carbon fibervinyl ester interfacial adhesion improvement by the use of an epoxy coating I.M. Daniel, Major accomplishment in composite materials and sandwiches structures: an anthology of ONR sponsored research 2009 Springer 27 50
36. Eberle CC, Janke CJ, Sands JA, Wilenski MS. Interfacial properties of electron cured composites. Cooperative research and development agreement final report for cooperative research and development. Agreement number ORNL99-0544; January 2005.
37. Defoort B, Drzal LT. Adhesion between carbon fibers and cationic matrices in electron-beam processed composites. In: Proceedings of the SAMPE ACCE midwest advanced materials and process conference, Dearborn, Michigan; September 1214, 2000.
38. Defoort B, Drzal LT. Interfacial phenomena and fiber matrix adhesion in electron beam processed composites. In: Proceedings of the 33rd international SAMPE technical conference, Seattle, Washington, USA; 2001.
39. Defoort B, Drzal LT. Adhesion between carbon fibers and cationic matrices in electron-beam curing processed composites. In: Proceedings of the 46th international SAMPE symposium, Long Beach, California, USA; May 610, 2001. p. 206375.
40. Janke CJ, Yarborough KD, Drzal LT. Fibermatrix interface studies on electron beam cured composites. In: Proceedings of the 44th international SAMPE symposium conference; May 2327, 1999.
41. Mäder E. Nanostructured surfaces and interphases for improved performances of radiation cured composites. In: Proceedings of the first euraycure workshop, radiation curing of composites, Baden Baden; October 89, 2003.
42. Z. Zhang, Y. Liu, Y. Huang, L. Liu, and J. Bao The effect of carbon-fiber surface properties on the electron-beam curing of epoxy-resin composites Compos Sci Technol 62 2002 331 337 (Pubitemid 34209717)
43. Lopata VJ, Chung M, McDougall TE, Weinberg V. Electron-curable adhesives for high performance structures. In: Proceedings of the 39th SAMPE conference, Anaheim, California; 1994.
44. Defoort B, Drzal LT. Influence of processing conditions on the electron beam curing kinetic of an epoxy resin for composites. In: Proceedings of the 2000 international chemical congress of pacific basin society, Honolulu, Hawaii, USA; December 1419, 2000.
45. Defoort B, Drzal LT. Influence of thermal postcuring on electron beam cured composites. In: Proceedings of the 46th international SAMPE symposium, Long Beach, California, USA; May 610, 2001. p. 255062.
46. Y. Thomas, J.P. Parisi, B. Boutevin, D. Beziers, and E. Chataignier Synthesis of (6-isocyanaton-hexyl)carbamoyloxyethyl-methacrylate and its uses as sizing-agent for carbon fiber composite materials cured by electron beam Polym Bull 29 1992 259 264
47. Y. Thomas, J.P. Parisi, B. Boutevin, D. Beziers, E. Chataigner, and G. Désarmot Improvement of fiber/matrix bonding in carbon-fiber/acrylic composites by electron irradiation: concept of difunctional chemical coupling agent Compos Sci Technol 52 1994 299 307 (Pubitemid 1200412)
48. F. Vautard Influence of the carbon fiber surface properties on interfacial adhesion in carbon fiber-acrylate composites cured by electron beam Compos Part A 42 2011 859 867
49. U. Zielke, K.J. Hüttinger, and W.P. Hoffman Surface oxidized carbon fibers: I. Surface structure and chemistry Carbon 34 1996 983 998 (Pubitemid 126341064)
50. P.V. Lakshminarayanan, H. Toghiani, and C.U. Pittman Jr Nitric acid oxidation of vapor grown carbon nanofibers Carbon 42 2004 2433 2442
51. M.R. Alexander, and F.R. Jones Effect of electrolytic oxidation upon the surface chemistry of type a carbon fibres. 3. Chemical state, source and location of surface nitrogen Carbon 34 1996 1093 1102 (Pubitemid 126347102)
52. J. Schultz, and M. Nardin Determination of the surface energy of solids by the two-liquid-phase method M.E. Schrader, G. Loeb, Modern approaches to wettability: theory and application 1992 Plenum Press New York 73 99
53. J. Schultz, C. Cazeneuve, M.E.R. Shanahan, and J.B. Donnet Fibre surface energy characterization J Adhes 12 1981 221 231
54. Lide DR. Surface tension of common liquids. In: Handbook of chemistry and physics, 74th ed. CRC Press.
55. T. Glauser, T. Johansson, and A. Hult Electron beam curing of thick thermoset composite matrices Polymer 40 1999 5297 5302 (Pubitemid 29339413)
56. Greszczuk LB. Theoretical studies of the mechanics of the fibermatrix interface in composites. In: Proceedings of the interfaces in composites ASTM STP 452; 1969. p. 4258.
57. P. Lawrence Some theoretical considerations of fiber pull-out from elastic matrix J Mater Sci 7 1972 1 6
58. P.S. Chua, and M.R. Piggott The glasspolymer interface: I - theoretical consideration for single pull-out tests Compos Sci Technol 22 1985 33 42 (Pubitemid 15567255)
59. S.F. Zhandarov, E. Mäder, and O.R. Yurkevich Indirect estimation of fiber/polymer bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests. Part I: local bond strength J Adhes Sci Technol 16 2002 1171 1200 (Pubitemid 34789909)
60. S.F. Zhandarov, and E.V. Pisanova The local bond strength and its determination by the fragmentation and pull-tout tests Compos Sci Technol 57 1997 957 964
61. C.H. Hsueh Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites Mat Sci Eng A Struct 123 1990 1 11
62. G. Désarmot, and J.P. Favre Advances in pull-out testing and data analysis Compos Sci Technol 42 1991 151 187 (Pubitemid 21712200)
63. L.T. Drzal, M.J. Rich, and P.F. Lloyd Adhesion of graphite fibers to epoxy matrices: I. The role of fiber surface treatment J Adhes 16 1982 1 30
64. J.B. Donnet, and P. Ehrburger Carbon fiber in polymer reinforcement Carbon 15 1977 143 152
65. J.D. Eick, R.J. Good, and A.W. Neumann Thermodynamics of contact angles. II. Rough solid surface J Colloid Interface Sci 53 1975 235 238
66. Ponsaud P, Defoort B, Coqueret X. Reactivity and network structure of UV- and EB-cured Bis-Phenol A Ethoxy Diacrylate. In: Proceedings of the RadTech Europe 2005 conference and exhibition; 2005.
67. C. Patacz, B. Defoort, and X. Coqueret Electron beam initiated polymerization of acrylate compositions. 1: FTIR monitoring of incremental irradiation Radiat Phys Chem 59 2000 329 337 (Pubitemid 30479804)
68. X. Coqueret, M. Krzeminski, P. Ponsaud, and B. Defoort Recent advances in electron-beam curing of carbon fiber-reinforced composites Radiat Phys Chem 78 2009 557 561
69. M. Krzeminski, M. Molinari, M. Troyon, and X. Coqueret Calorimetric characterization of the heterogeneities produced by the radiation-induced cross-linking polymerization of aromatic diacrylates Macromolecules 43 2010 3757 3763
70. X. Gang, Z. Yongbin, and S. Wenfang Properties and morphologies of UV-cured epoxy acrylate blend films containing hyperbranched polyurethane acrylate/hyperbranched polyester J Polym Sci Polym Phys 43 2005 3159 3170
71. C. Decker, and D. Decker Photoinitiated polymerization of vinyl ether and acrylate monomer mixtures J Macromol Sci A A34 1997 605 625 (Pubitemid 127561273)
72. Y.Q. Wang, F.Q. Zhang, and P.M.A. Sherwood X-ray photoelectron spectroscopic study of carbon fiber surfaces. 23. Interfacial interactions between polyvinyl alcohol and carbon fibers electrochemically oxidized in nitric acid solution Chem Mater 11 1999 2573 2583 (Pubitemid 129687205)
73. H. Viswanathan, Y.Q. Wang, A.A. Audi, P.J. Allen, and P.M.A. Sherwood X-ray photoelectron spectroscopic studies of carbon fiber surfaces. 24. Interfacial interactions between polyimide resin and electrochemically oxidized PAN-based carbon fibers Chem Mater 13 2001 1647 1655 (Pubitemid 32845329)
74. Y.Q. Wang, F.Q. Zhang, and P.M.A. Sherwood X-ray photoelectron spectroscopic studies of carbon fiber surfaces. 25. Interfacial interactions between PEKK polymer and electrochemically oxidized in nitric acid solution and degradation in a saline solution Chem Mater 13 2001 832 841 (Pubitemid 32844956)
75. M. Krzeminski, M. Molinari, and M. Troyon Characterization by atomic force microscopy of the nanoheterogeneities by the radiation-induced cross-linking polymerization of aromatic diacrylates Macromolecules 43 2010 8121 8127
76. X. Dirand, B. Hilaire, E. Lafontaine, B. Mortaigne, and M. Nardin Crosslinking of vinyl ester matrix in contact with different surfaces Composites 25 1994 645 652
77. X. Dirand, B. Hilaire, J.P. Soulier, and M. Nardin Interfacial shear strength in glass-fiber/vinylester composites Compos Sci Technol 56 1996 533 539 (Pubitemid 126381792)
78. Ponsaud P. Amélioration des propriétés mécaniques transverses de matériaux composites polymérisés sous rayonnement ionisant: étude des facteurs influents, PhD thesis. Université des Sciences et Technologies de Lille; 2005.
79. M.R. Piggott, and S.R. Dai Fiber pull out experiments with thermoplastics Polym Eng Sci 31 1991 1246 1249