Laminar-transitional micropipe flows: Energy and exergy mechanisms based on Reynolds number, pipe diameter, surface roughness and wall heat flux

Heat and Mass Transfer/Waerme- und Stoffuebertragung

Volumn 48, Issue 1, 2012, Pages 17-34

  Alper Ozalp, A ^a  

^a ULUDAG UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

ENERGY AND EXERGY; ENERGY EQUATION; ENTROPY GENERATION; ENTROPY GENERATION RATE; FRICTION COEFFICIENTS; HEAT TRANSFER RATE; INTERMITTENCY; MICROPIPES; NAVIER STOKES; PIPE DIAMETER; SHAPE FACTOR; TOTAL ENTROPY; VARIABLE FLUID PROPERTIES; WALL HEAT FLUX;

ENTROPY; EXERGY; FRICTION; HEAT FLUX; NAVIER STOKES EQUATIONS; REYNOLDS NUMBER; SURFACE STRUCTURE;

SURFACE ROUGHNESS;

EID: 84856087520     PISSN: 09477411     EISSN: 14321181     Source Type: Journal    
DOI: 10.1007/s00231-011-0832-6     Document Type: Article

References (42)

1. Lin WW, Lee DJ (1998) Second-law analysis on wavy plate finand-tube heat exchangers. J Heat Transf ASME Trans 120:797-801. doi:10.1115/1.2824357
2. Ozgener L, Hepbasli A, Dincer I (2007) Parametric study of the effect of reference state on energy and exergy efficiencies of geothermal district heating systems (GDHSs): an application of the Salihli GDHS in Turkey. Heat Transf Eng 28:357-364. doi: 10.1080/01457630601122948 (Pubitemid 46396028)
3. Petropoulos A, Kaltsas G (2010) Study and evaluation of a PCB-MEMS liquid microflow sensor. Sensors 10:8981-9001. doi: 10.3390/s101008981
4. Granovskii M, Dincer I, Rosen MA (2006) Application of oxygen ion-conductive membranes for simultaneous electricity and hydrogen generation. Chem Eng J 120:193-202. doi:10.1016/j.cej.2006.01.020 (Pubitemid 43903667)
5. Obot NT (2002) Toward a better understanding of friction and heat/mass transfer in microchannels-a literature review. Microscale Thermophys Eng 6:155-173. doi:10.1080/10893950 290053295
6. Wu HY, Cheng P (2003) An experimental study of convective heat transfer in silicon microchannels with different surface conditions. Int J Heat Mass Transf 46:2547-2556. doi:10.1016/S0017-9310 (03) 00035-8 (Pubitemid 36610809)
7. Guo ZY, Li ZX (2003) Size effect on microscale single-phase flow and heat transfer. Int J Heat Mass Transf 46:149-159. doi: 10.1016/S0017-9310 (02) 00209-0
8. Kandlikar SG, Joshi S, Tian S (2003) Effect of surface roughness on heat transfer and fluid flow characteristics at low Reynolds numbers in small diameter tubes. Heat Transf Eng 24:4-16. doi: 10.1080/01457630390149260
9. Engin T, Dogruer U, Evrensel C, Heavin S, Gordaninejad F (2004) Effect of wall roughness on laminar flow of Bingham plastic fluids through microtubes. J Fluids Eng ASME Trans 126:880-883. doi:10.1115/1.1792252 (Pubitemid 40026596)
10. Petropoulos A, Kaltsas G, Randjelovic D (2010) Study of flow and pressure field in microchannels with various cross-section areas. Microelectron Eng 87:827-829. doi:10.1016/j.mee.2009. 10.025
11. Renaud L, Malhaire C, Kleimann P (2008) Theoretical and experimental studies of microflows in silicon microchannels. Mater Sci Eng C-Biomimetric Supramol Syst 28:910-917. doi: 10.1016/j.msec.2007.10.070 (Pubitemid 351621946)
12. Vicente PG, Garcia A, Viedma A (2002) Experimental study of mixed convection and pressure drop in helically dimpled tubes for laminar and transition flow. Int J Heat Mass Transf 45:5091-5105. doi:10.1016/S0017-9310 (02) 00215-6 (Pubitemid 35218894)
13. Koo J, Kleinstreuer C (2004) Viscous dissipation effects in microtubes and microchannels. Int J Heat Mass Transf 47:3159-3169. doi:10.1016/j. ijheatmasstransfer.2004.02.017 (Pubitemid 38616295)
14. Morini GL (2005) Viscous heating in liquid flows in microchannels. Int J Heat Mass Transf 48:3637-3647. doi:10.1016/j.ijheatransfer.2005.01.011
15. Parlak N, Gur M, Ari V, Kucuk H, Engin T (2011) Second law analysis of water flow through smooth microtubes under adiabatic conditions. Exp Thermal Fluid Sci 35:60-67. doi:10.1016/j.expthermflusci.2010.08.006
16. Celata GP, Morini GL, Marconi V, McPhail SJ, Zummo G (2006) Using viscous heating to determine the friction factor in microchannels-an experimental validation. Exp Thermal Fluid Sci 30:725-731. doi:10.1016/j.expthermflusci.2006. 03.002 (Pubitemid 44137495)
17. Almeida A, Geraldes V, Semiao V (2010) Microflow hydrodynamics in slits: effects of the walls relative roughness and spacer inter-filaments distance. Chem Eng Sci 65:3660-3670. doi: 10.1016/j.ces.2010.03.006
18. Zimparov V (2000) Extended performance evaluation criteria for enhanced heat transfer surfaces: heat transfer through ducts with constant wall temperature. Int J Heat Mass Transf 43:3137-3155. doi:10.1016/S0017-9310 (99) 00317-8 (Pubitemid 30327721)
19. Hooman K (2008) Heat transfer and entropy generation for forced convection through a microduct of rectangular cross-section: effects of velocity slip, temperature jump, and duct geometry. Int Commun Heat Mass Transf 9:1065-1068. doi:10.1016/j.icheatmasstransfer.2008.05.015
20. Avci M, Aydin O (2007) Second-law analysis of heat and fluid flow in microscale geometries. Int J Exergy 4:286-301. doi: 10.1504/IJEX.2007.013395 (Pubitemid 46958369)
21. Ratts EB, Raut AG (2004) Entropy generation minimization of fully developed internal flow with constant heat flux. J Heat Transf ASME Trans 126:656-659. doi:10.1115/1.1777585 (Pubitemid 39437513)
22. Kotas TJ, Mayhew YR, Raichura RC (1995) Nomenclature for exergy analysis. Proc Inst Mech Eng Part A 209:275-280. doi: 10.1243/PIME-PROC-1995-209-006-01
23. Sahin AZ (1998) Second-law analysis of laminar viscous flow through a duct subjected to constant wall temperature. J Heat Transf ASME Trans 120:77-83. doi:10.1115/1.2830068
24. Ko TH (2006) Numerical analysis of entropy generation and optimal Reynolds number for developing laminar forced convection in double-sine ducts with various aspect ratios. Int J Heat Mass Transf 49:718-726. doi:10.1016/j.ijheatmasstransfer.2005. 08.023 (Pubitemid 43177718)
25. Erbay LB, Yalcin MM, Ercan MS (2007) Entropy generation in parallel plate microchannels. Heat Mass Transf 43:729-739. doi: 10.1007/s00231-006-0164-0 (Pubitemid 46675523)
26. Ozalp AA (2008) Roughness induced forced convective laminartransitional micropipe flow: energy and exergy analysis. Heat Mass Transf 45:31-46. doi:10.1007/s00231-008-0407-3
27. Ozalp AA (2009) Entropy analysis of laminar-forced convection in a pipe with wall roughness. Int J Exergy 6:249-275. doi: 10.1504/IJEX.2009.024001
28. Ozalp AA (2009) 1st and 2nd law characteristics in a micropipe: integrated effects of surface roughness, heat flux and Reynolds number. Heat Transf Eng 30:973-987. doi:10.1080/0145763090 2837467
29. Ozalp AA (2010) Combined effects of pipe diameter, Reynolds number and wall heat flux and on flow, heat transfer and secondlaw characteristics of laminar-transitional micropipe flows. Entropy 12:445-479. doi:10.3390/e12030445
30. Cao BY, Chen M, Guo ZY (2006) Effect of surface roughness on gas flow in microchannels by molecular dynamics simulation. Int J Eng Sci 44:927-937. doi:10.1016/j.ijengsci.2006.06.005 (Pubitemid 44278056)
31. Incropera FP, De Witt DP (2001) Fundamentals of heat and mass transfer. Wiley, New York
32. Ozalp AA (2006) A computational study to predict the combined effects of surface roughness and heat flux conditions on converging-nozzle flows. Trans Can Soc Mech Eng 29:67-80
33. Wu JS, Tseng KC (2001) Analysis of micro-scale gas flows with pressure boundaries using direct simulation Monte Carlo method. Comput Fluid 30:711-735. doi:10.1016/S0045-7930 (00) 00029-3
34. White FM (1988) Fluid mechanics. McGraw-Hill, Singapore
35. Wang H, Wang Y, Zhang J (2005) Influence of ribbon structure rough wall on the microscale Poiseuille flow. J Fluid Eng ASME Trans 127:1140-1145. doi:10.1115/1.2060733 (Pubitemid 41681065)
36. Wu P, Little WA (1983) Measurement of friction factors for the flow of gases in very fine channels used for microminiature Joule-Thompson refrigerators. Cryogenics 23:273-277. doi: 10.1016/0011-2275 (83) 90150-9 (Pubitemid 13521717)
37. Kohl MJ, Abdel-Khalik SI, Jeter SM, Sadowski DL (2005) An experimental investigation of microchannel flow with internal pressure measurements. Int J Heat Mass Transf 48:1518-1533. doi:10.1016/j.ijheatmasstransfer.2004.10.030 (Pubitemid 40318778)
38. Choi SB, Barron RF, Warrington RO (1991) Fluid flow and heat transfer in microtubes. Micromech Sens Actuators Syst 32:123-134
39. Yu D, Warrington R, Baron R, Ameel T (1995) An experimental and theoretical investigation of fluid flow and heat transfer in microtubes. ASME/JSME Therm Eng Conf 1:523-530
40. Vijayalakshmi K, Anoop KB, Patel HE (2009) Effects of compressibility and transition to turbulence on flow through microchannels. Int J Heat Mass Transf 52:2196-2204. doi:10.1016/j.ijheatmasstransfer.2008.07.056
41. Ozalp AA, Dincer I (2010) Hydrodynamic-thermal boundary layer development and mass transfer characteristics of a circular cylinder in confined flow. Int J Therm Sci 49:1799-1812. doi: 10.1016/j.ijthermalsci.2010.04.016
42. Li J, Peterson GP, Cheng P (2004) Three-dimensional analysis of heat transfer in a micro-heat sink with single phase flow. Int J Heat Mass Transf 47:4215-4231. doi:10.1016/j.ijheatmasstransfer. 2004.04.018 (Pubitemid 38958462)