Shaped metal deposition of 300M steel

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 225, Issue 6, 2011, Pages 831-839

  Skiba, T ^a,b   Baufeld, B ^a   Van Der Biest, O ^a  

^a UNIVERSITY OF LEUVEN   (Belgium)

^b CZECH TECHNICAL UNIVERSITY IN PRAGUE   (Czech Republic)

Author keywords

300M; Bainite; Mechanical properties; Microstructure; Shaped metal deposition; Ultra high strength low alloy steel

Indexed keywords

300M; BAINITIC MICROSTRUCTURES; BASE PLATES; LOW ALLOY STEELS; MATERIAL PROPERTY; METAL DEPOSITION; SHAPED METAL DEPOSITION; STEEL WIRE; TENSILE TESTS; ULTIMATE TENSILE STRENGTH;

BAINITE; HIGH STRENGTH ALLOYS; MECHANICAL PROPERTIES; MICROSTRUCTURE; TENSILE STRENGTH; TENSILE TESTING; WIRE;

HIGH STRENGTH STEEL;

EID: 80051883870     PISSN: 09544054     EISSN: 20412975     Source Type: Journal    
DOI: 10.1177/09544054JEM2115     Document Type: Article

References (30)

1. Choi, D.-S., Lee, S. H., Shin, B. S., Whang, K. H., Song, Y. A., Park, S. H., and Jee, H. S. Development of a direct metal freeform fabrication technique using CO2 laser welding and milling technology. J. Mater. Process Technol., 2001, 113(1-3), 273-279. (Pubitemid 32518380)
2. Syed, W. U. H., Pinkerton, A. J., and Li, L. A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping. Appl. Surf. Sci., 2005, 247(1-4), 268-276. (Pubitemid 40743470)
3. Mok, S. H., Bi, G., Folkes, J., and Pashby, I. Deposition of Ti-6Al-4V using a high power diode laser and wire, Part I: Investigation on the process characteristics. Surf. Coatings Technol., 2008, 202(16), 3933-3939. (Pubitemid 351494500)
4. Mok, S. H., Bi, G., Folkes, J., Pashby, I., and Segal, J. Deposition of Ti-6Al-4V using a high power diode laser and wire, Part II: Investigation on the mechanical properties. Surf. Coatings Technol., 2008, 202(19), 4613-4619. (Pubitemid 351773113)
5. Domack, M. S., Taminger, K. M., and Begley, M. Metallurgical mechanisms controlling mechanical properties of aluminum alloy 2219 produced by electron beam freeform fabrication. Mater. Sci. Forum 2006, 519521 (Aluminium Alloys), 1291-1296.
6. Murr, L. E., Gaytan, S. M., Lopez, M. I., Martinez, E., Medina, F., and Wicker, R. B. Metallographic characterization of additive-layer manufactured products by electron beam melting of Ti-6Al-4V powder. Prakt. Metallogr.-Pract. Metallogr., 2009, 46(9), 442-453.
7. Ackelid, U. and Svensson, M. Additive manufacturing of dense metal parts by electron beam melting. Materials science and technology. In Proceedings of Materials science and technology (MS&T), 2009 Pittsburgh, Pennsylvania, USA.
8. Clark, D., Bache, M., and Whittaker, M. Shaped metal deposition of a nickel alloy for aero engine applications. J. Mater. Process. Technol., 2008, 203(1-3), 439-448.
9. Katou, M., Oh, J., Miyamoto, Y., Matsuura, K., and Kudoh, M. Freeform fabrication of titanium metal and intermetallic alloys by three-dimensional micro welding. Mater. Des., 2007, 28(7), 2093-2098. (Pubitemid 46796676)
10. Baufeld, B., Van der Biest, O., and Gault, R. Microstructure of Ti-6Al-4V specimens produced by shaped metal deposition. Int. J. Mater. Res., 2009, 100(11), 1536-1542.
11. Kobryn, P. A. and Semiatin, S. L. (Eds) Mechanical properties of laser-deposited Ti-6Al-4V. Solid freeform fabrication, 2001 (The University of Texas at Austin, TX, USA).
12. Roebben, G., Bollen, B., Brebels, A., van Humbeeck, J., and van der Biest, O. Impulse excitation apparatus to measure resonant frequencies, elastic moduli, and internal friction at room and high temperature. Rev. Sci. Instrum., 1997, 68(12), 4511-4515. (Pubitemid 127646021)
13. Bhadeshia, H. K. D. H. Bainite in steels - transformation, microstructure and properties, 2nd edn, 2001 (Institute of Materials Communications Ltd, London, UK).
14. Tomita, Y. and Okawa, T. Effect of microstructure on mechanical properties of isothermally bainite-transformed 300M steel. Mater. Sci. Engng A, Struct. Mater. Prop. Microstruct. Process, 1993, 172(1-2), 145-151.
15. El Kadiri, H., Wang, L., Horstemeyer, M. F., Yassar, R. S., Berry, J. T., Felicelli, S., and Wang, P. W. Phase transformations in low-alloy steel laser deposits. Mater. Sci. Engng A, Struct. Mater. Prop. Microstruct. Process, 2008, 494(1-2), 10-20.
16. Wozniak, T. Z. Modeling kinetics of the austenite simultaneous decomposition into two bainitic products in the range of swing back. Mater. Sci. Engng A, Struct. Mater. Prop. Microstruct. Process, 2005, 408(1-2), 309-316. (Pubitemid 41671378)
17. Babu, S. S. The mechanism of acicular ferrite in weld deposits. Curr. Opinion Solid State Mater. Sci., 2004, 8(3-4), 267-278. (Pubitemid 40211031)
18. Hase, K., Garcia-Mateo, C., and Bhadeshia, H. Bimodal size-distribution of bainite plates. Mater. Sci. Engng A, Struct. Mater. Prop. Microstruct Process, 2006, 438, 145-148. (Pubitemid 44649151)
19. Aaronson, H. I., Spanos, G., and Reynolds, W. T. A progress report on the definitions of bainite. Scripta Materialia, 2002, 47(3), 139-144. (Pubitemid 34802406)
20. Fang, H. S., Yang, J. B., Yang, Z. G., and Bai, B. Z. The mechanism of bainite transformation in steels. Scripta Materialia, 2002, 47(3), 157-162.
21. Yang, Z. G. and Fang, H. S. An overview on bainite formation in steels. Curr. Opinion Solid State Mater. Sci., 2005, 9(6), 277-286.
22. Bhadeshia, H. K. D. H. and Honeycombe, S. R. Steels, microstructure and properties, 2006 (Butterworth- Heinemann, Oxford).
23. Bhadeshia, H. The bainite transformation: unresolved issues. Mater. Sci. Engng A, Struct. Mater. Prop. Microstruct. Process, 1999, 273, 58-66.
24. Caballero, F. G., Miller, M. K., Babu, S. S., and Garcia-Mateo, C. Atomic scale observations of bainite transformation in a high carbon high silicon steel. Acta Mater., 2007, 55(1), 381-390. (Pubitemid 44820952)
25. Lee, S. J. and Lee, Y. K. Prediction of austenite grain growth during austenitization of low alloy steels. Mater. Des., 2008, 29(9), 1840-184.
26. ASM. Metals handbook. Vol. 9. Metallography and microstructures, 2004 (ASM International, Materials Park, OH).
27. Youngblood, J. L. and Raghavan, M. Microstructure and mechanical properties of quenched and tempered 300M steel/J. L., Lyndon B. Johnson Space Center, M. Raghavan, Olin Corporation. US NASA technical paper 1978, 1288.
28. Hornikova, J., Sandera, P., and Pokluda, J. Influence of tempering temperature on mechanical properties of ultra-high strength low-alloy steels. In Proceedings of Super-high strength steels, 2005, pp. 1-10 (AIM & CSM, Italy, Rome).
29. ASM. Metals handbook. Vol. 1. Properties and Selection: iron steels and high performance alloys, 1990 (ASM International, Materials Park, OH).
30. ASM. Carbon and alloy steels. ASM specialty handbook, 1996 (ASM International, Materials Park, OH).