Estimation of minimum chip thickness in micro-milling using acoustic emission

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 225, Issue 9, 2011, Pages 1535-1551

  Mian, A J ^a   Driver, N ^a   Mativenga, P T ^a  

^a UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

Acoustic emission; Micro cutting; Minimum chip thickness

Indexed keywords

ACOUSTIC EMISSION SIGNAL; AE SIGNALS; CHIP MORPHOLOGIES; FEED-RATES; MICRO MILLING; MICRO-CUTTING; MINIMUM CHIP THICKNESS; MULTIPHASE STEEL; ORTHOGONAL MACHINING; THRESHOLD CONDITION; WORK PIECES; WORKPIECE MATERIALS;

IRON; MILLING (MACHINING); MILLING MACHINES; TITANIUM; TITANIUM ALLOYS;

ACOUSTIC EMISSIONS;

EID: 84855918738     PISSN: 09544054     EISSN: 20412975     Source Type: Journal    
DOI: 10.1177/0954405411404801     Document Type: Conference Paper

References (40)

1. Ikawa, N., Shimada, S., and Tanaka, H. Minimum thickness of cut in micromachining. Nanotechnology, 1992, 3(1), 6-9. (Pubitemid 23614852)
2. Aramcharoen, A. and Mativenga, P. T. Size effect and tool geometry in micromilling of tool steel. Precis. Engng, 2009, 33(4), 402-407.
3. Weule, H., Huntrup, V., and Tritschler, H. Micro-cutting of steel to meet new requirements in miniaturization. CIRP Ann. Manuf. Technol., 2001, 50(1), 61-64. (Pubitemid 32615754)
4. Vogler, M. P., DeVor, R. E., and Kapoor, S. G. On the modeling and analysis of machining performance in micro-endmilling Part II: Cutting force prediction. J. Manuf. Sci. Engng Trans. ASME, 2004, 126(4), 695-705. (Pubitemid 40329876)
5. Vogler, M. P., DeVor, R. E., and Kapoor, S. G. On the modeling and analysis of machining performance in micro-endmilling. Part I: Surface generation. J. Manuf. Sci. Engng Trans. ASME, 2004, 126(4), 685-694. (Pubitemid 40329875)
6. Lee, K. and Dornfeld, D. A. Micro-burr formation and minimization through process control. Precis. Engng, 2005, 29(2), 246-252. (Pubitemid 40370718)
7. Mian, A. J., Driver, N., and Mativenga, P. T. A comparative study of material phase effects on micromachinability of multiphase materials. Int. J. Adv. Manuf. Technol., 2010, 50(1), 163-173.
8. Shimada, S., Ikawa, N., Tanaka, H., Ohmori, G., Uchikoshi, J., and Yoshinaga, H. Feasibility study on ultimate accuracy in microcutting using molecular dynamics simulation. CIRP Ann. Manuf. Technol., 1993, 42(1), 91-94. (Pubitemid 23679081)
9. Yuan, Z. J., Zhou, M., and Dong, S. Effect of diamond tool sharpness on minimum cutting thickness and cutting surface integrity in ultra precision machining. J. Mater. Process. Technol., 1996, 62(4), 327-330. (Pubitemid 126366029)
10. Son, S. M., Lim, H. S., and Ahn, J. H. Effects of the friction coefficient on the minimum cutting thickness in micro cutting. Int. J. Mach. Tools Manuf., 2005, 45(4-5), 529-535. (Pubitemid 40142544)
11. Kim, C. J., Mayor, J. R., and Ni, J. A static model of chip formation in microscale milling. J. Manuf. Sci. Engng Trans. ASME, 2004, 126(4), 710-718. (Pubitemid 40329878)
12. Liu, X., DeVor, R. E., and Kapoor, S. G. An analytical model for the prediction of minimum chip thickness in micromachining. J. Manuf. Sci. Engng Trans. ASME, 2006, 128(2), 474-481. (Pubitemid 43952201)
13. Lai, X., Li, H., Li, C., Lin, Z., and Ni, J. Modelling and analysis of micro-scale milling considering size effect, micro cutter edge radius and minimum chipthickness. Int. J. Mach. Tools Manuf., 2008, 48(1), 1-14. (Pubitemid 47592970)
14. Rosa, P. A. R., Kolednik, O., Martins, P. A. F., and Atkins, A. G. The transient beginning to machining and the transition to steady-state cutting. Int. J. Mach. Tools Manuf., 2007, 47(12-13), 1904-1915. (Pubitemid 47211763)
15. Atkins, A. G. and Liu, J. H. Toughness and the transition between cutting and rubbing in abrasive contacts. Wear, 2007, 262(1-2), 146-159. (Pubitemid 44750080)
16. Chae, J., Park, S. S., and Freiheit, T. Investigation of micro-cutting operations. Int. J. Mach. Tools Manuf., 2006, 46(3-4), 313-332. (Pubitemid 41827905)
17. Marinescu, I. and Axinte, D. A. A critical analysis of effectiveness of acoustic emission signals to detect tool and workpiece malfunctions in milling operations. Int. J. Mach. Tools Manuf., 2008, 48(10), 1148-1160.
18. Lee, D. E., Hwang, I., Valente, C. M. O., Oliveira, J. F. G., and Dornfeld, D. A. Precision manufacturing process monitoring with acoustic emission. Int. J. Mach. Tools Manuf., 2006, 46(2), 176-188. (Pubitemid 41563982)
19. Griffin, J. and Chen, X. Classification of the acoustic emission signals of rubbing, ploughing and cutting during single grit scratch tests. Int. J. Nanomanuf., 2006, 1(2), 189-209.
20. Liu, J. J. and Dornfeld, D. A. Modeling and analysis of acoustic emission in diamond turning. J. Manuf. Sci. Engng Trans. ASME, 1996, 118(2), 199-207.
21. Mian, A. J., Driver, N., and Mativenga, P. T. Chip formation in microscale milling and correlation with acoustic emission signal. Int. J. Adv. Manuf. Technol., DOI: 10.1007/s00170-011-3185-x.
22. Uehara, K. and Kanda, Y. Identification of chip formation mechanism through acoustic emission measurements. CIRP Ann. Manuf. Technol., 1984, 33(1), 71-74. (Pubitemid 15445934)
23. Margot, R., Boeir, A. M. G., Kuster, F., Roelof, H., Urlau, U., and Weingaertner, W. L. Monitoring chip formation in machining through strategical on-line signal processing of acoustic emission. Proceedings of the 38th CIRP International Seminar on Manufacturing Systems, 2005 (Florianópolis, Brazil)16-18 May (Available on CD).
24. Komanduri, R. Some aspects of machining with negative rake tools simulating grinding. Int. J. Mach. Tool Des. Res., 1971, 11(3), 223-233.
25. Jemielniak, K. Some aspects of acoustic emission signal pre-processing. J. Mater. Process. Technol., 2001, 109(3), 242-247. (Pubitemid 32092563)
26. Shaw, M. C. Metal cutting principles, 2nd edn. 2005 (Oxford University Press, New York/Oxford).
27. Subbiah, S. and Melkote, S. N. Effect of finite edge radius on ductile fracture ahead of the cutting tool edge in micro-cutting of Al2024-T3. Mater. Sci. Engng A, 2008, 474(1-2), 283-300.
28. Carpenter, S. H., Heiple, C. R., Armentrout, D. L., Kustas, F. M., and Schwarzberg, J. S. Acoustic emission produced by sliding friction and its relationship to AE from machining. J. Acoust. Emission, 1992, 10(3-4), 97-101.
29. Mian, A. J., Driver, N., and Mativenga, P. T. Estimation of minimum chip thickness for multiphase steel using acoustic emission signals, Proceedings of the 36th International MATADOR Conference, 2010, pp.197-200 (Manchester, UK).
30. Tönshoff, H. K., Jung, M., Männel, S., and Rietz, W. Using acoustic emission signals for monitoring of production processes. Ultrasonics, 2000, 37(10), 681-686.
31. Ezugwu, E. O. and Wang, Z. M. Titanium alloys and their machinability: a review. J. Mater. Process. Technol., 1997, 68(3), 262-274. (Pubitemid 127393463)
32. Lucca, D. A., Rhorer, R. L., and Komanduri, R. Effect of tool edge geometry on energy dissipation in ultra precision machining. CIRP Ann. Manuf. Technol., 1993, 42(1), 83-86. (Pubitemid 23679083)
33. Nakayama, K. and Tamura, K. Size effect in metalcutting force. J. Engng Indust. Trans. ASME, 1968, 90(1), 119-126.
34. Sturges, R. H. Monitoring milling processes through AE and tool/part geometry. J. Engng Indust. Trans. SME, 1992, 114(1), 8-14.
35. Chen, X., Tang, J., and Dornfeld, D. Monitoring and analysis of ultraprecision metal cutting with acoustic emission. ASME Mechanical Engineering Congress and Exposition, 1996, pp. 387-393 (Atlanta, GA) November.
36. Kim, C. J., Bono, M., and Ni, J. Experimental analysis of chip formation in micro-milling. Trans. NAMRI/ SME, 2002, 30, 1-8. (Pubitemid 34745790)
37. Black, J. T. Shear front-lamella structure in large strain plastic deformation processes. J. Engng Indust., 1972, 94(2), 307-316.
38. Ueda, K. and Manabe, K. Chip formation mechanism in microcutting of an amorphous metal. CIRP Ann. Manuf. Technol., 1992, 41(1), 129-132. (Pubitemid 23568255)
39. Barry, J., Byrne, G., and Lennon, D. Observations on chip formation and acoustic emission in machining Ti-6Al-4V alloy. Int. J. Mach. Tools Manuf., 2001, 41(7), 1055-1070. (Pubitemid 32272842)
40. Spiewak, S. An improved model of the chip thickness in milling. CIRP Ann. Manuf. Technol., 1995, 44(1), 39-42.