Mechanical studies of single glass fibres recycled from hydrolysis process using sub-critical water

Composites Part A: Applied Science and Manufacturing

Volumn 43, Issue 3, 2012, Pages 398-406

  Kao, C C ^a   Ghita, O R ^a   Hallam, K R ^b   Heard, P J ^b   Evans, K E ^a  

^a UNIVERSITY OF EXETER   (United Kingdom)

^b UNIVERSITY OF BRISTOL   (United Kingdom)

Author keywords

A. Glass fibres; B. Mechanical properties; D. Surface analysis; E. Recycling

Indexed keywords

E. RECYCLING; EFFECT OF TEMPERATURE; ENERGY DISPERSIVE X-RAY; FAILURE STRAIN; FIBRE SURFACES; HYDROLYSIS REACTION; MECHANICAL PERFORMANCE; MECHANICAL STUDY; RECOVERED FIBRE; RECYCLED FIBRE; RECYCLED GLASS; SECONDARY ION MASS SPECTROSCOPY; SUB-CRITICAL WATER; TIME OF FLIGHT; TOF SIMS; WATER AMOUNT; WATER BASED; YOUNG'S MODULUS;

ESTERS; FIBERS; GLASS FIBERS; HYDROLYSIS; MECHANICAL PROPERTIES; POLYESTER RESINS; RECOVERY; RECYCLING; SCANNING ELECTRON MICROSCOPY; SECONDARY ION MASS SPECTROMETRY; SOLVENTS; SURFACE ANALYSIS;

TENSILE STRENGTH;

EID: 84855758527     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2011.11.011     Document Type: Article

References (42)

1. T. Inoh, T. Tokoi, K. Sekiyama, N. Kawamura, and Y. Mishima SMC recycling technology J Thermoplast Compos Mater 7 1994 42
2. C.E. Bream, and P.R. Hornbsy Comminuted thermoset recyclate as a reinforcing filler for thermoplastics. Part 1: characterisation of recyclate feedstocks J Mater Sci 36 2001 2965
3. R. Rikards, K. Goracy, A.K. Bledzki, and A. Chate Prediction of mechanical properties of composites with recycled particles Mech Comput Mater 30 1994 563
4. J. Petterson, and P. Nilsson Recycling SMC and BMC in standard process equipment J Thermoplast Comput Mater 7 1994 56
5. C.E. Bream, and P.R. Hornsby Comminuted thermoset recyclate as a reinforcing filler for thermoplastics. Part 2: structure-property effects in polypropylene compositions J Mater Sci 36 2001 2977
6. R. Derosa, E. Telfeyan, G. Gaustad, and S. Mayes Strength microscopic investigation of unsaturated polyester BMC reinforced with SMC-recyclate J Thermoplast Comput Mater 18 2005 333
7. J. Palmer, O.R. Ghita, L. Savage, and K.E. Evans Successful closed-loop recycling of thermoset composites Composites A 40 2009 490
8. P.T. Williams, and E.A. Williams Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock J Anal Appl Pyrolysis 51 1999 107
9. A. Torres, I. de Marco, B.M. Caballero, M.F. Laresgoiti, J.A. Legarreta, and M.A. Cabrero Recycling by pyrolysis of thermoset composites: characteristics of the liquid and gaseous fuels obtained Fuel 79 2000 879
10. A.M. Cunliffe, and P.T. Williams Characterisation of products from the recycling of glass fibre reinforced polyester waste by pyrolysis Fuel 82 2003 2223
11. A. Torres, I. de Marco, B.M. Caballero, M.F. Laresgoiti, M.J. Chomon, and G. Kondra Recycling of the solid residue obtained from the pyrolysis of fibreglass polyester sheet molding compound Adv Polym Technol 28 2009 141
12. J.R. Kennerley, R.M. Kelly, N.J. Fenwick, S.J. Pickering, and C.D. Rudd The characterisation and reuse of glass fibres recycled from scrap composites by the action of a fluidised bed process Composites A 29A 1998 839
13. S.J. Pickering, R.M. Kelly, J.R. Kennerley, C.D. Rudd, and N.J. Fenwick A fluidised-bed process for the recovery of glass fibres from scrap thermoset composites Compos Sci Technol 60 2000 509
14. S.J. Pickering Recycling technologies for thermoset composite materials - current status Composites A 37 2006 1206
15. H. Winter, H.A.M. Mostert, P.J.H. Smeets, and G. Paas Recycling of sheet-molding compounds by chemical routes J Appl Polym Sci 57 1995 1409
16. R. Derosa, E. Telfeyan, and J.S. Mayes Current state of recycling sheet molding compounds and related materials J Thermoplast Compos Mater 18 2005 219
17. J. Economy, and A.G. Andreopoulos A new concept for recycling of thermosetting resins 1: the case of crosslinkable copolyesters Polym Adv Technol 7 1996 561
18. T. Sugeta, S. Nagaoka, K. Otake, and T. Sako Decomposition of fibre reinforced plastics using fluid at high temperature and pressure Kobunshi Ronbunshu 58 2001 557
19. K. Suyama, M. Kubota, M. Shirai, and H. Yoshida Effect of alcohols on the degradation of crosslinked unsaturated polyester in sub-critical water Polym Degrad Stab 91 2006 983
20. M. Goto, M. Sasaki, and T. Hirose Reactions of polymers in supercritical fluids for chemical recycling of waste plastics J Mater Sci 41 2006 1509
21. K. Suyama, M. Kubota, M. Shirai, and H. Yoshida Degradation of crosslinked unsaturated polyesters in sub-critical water Polym Degrad Stab 92 2007 317
22. T. Iwaya, S. Tokuno, M. Sasaki, M. Goto, and K. Shibata Recycling of fibre reinforced plastics using depolymerization by solvothermal reaction with catalyst J Mater Sci 43 2008 2452
23. M. Goto Chemical recycling of plastics using sub- and supercritical fluids J Supercrit Fluids 47 2009 500
24. A.R. Katritzky, S.M. Allin, and M. Siskin Aquathermolysis: reactions of organic compounds with superheated water Acc Chem Res 29 1996 399
25. M. Siskin, and A.R. Katrizky Reactivity of organic compounds in superheated water: general background Chem Rev 101 2001 824
26. H.R. Patrick, K. Griffith, C.L. Liotta, C.A. Eckert, and R. Glaser Near-critical water: a benign medium for catalytic reactions Ind Eng Chem Res 40 2001 6063
27. Atkins P, de Paula J. Atkins' physical chemistry. 7th ed. Oxford Press; 2002.
28. R. Pinero-Hernanz, C. Dodds, J. Hyde, J. Garcia-Serna, M. Poliakoff, and E. Lester Chemical recycling of carbon fibre reinforced composites in near critical and supercritical water Composites A 39 2008 454
29. Y.I. Kolesov, M.Y. Kudryavtsev, and N.Y. Mikhailenko Types and compositions of glass for production of continuous glass fiber (review) Glass Ceram 58 2001 197
30. G. Oliveux, E. Le Gal La Salle, and J.L. Bailleul Recycling by solvolysis thermosetting composite materials of sustainable surface transport AIP Conf Proc 1315 2011 209
31. ASTM D 3379-75. Standard test method for tensile strength and Young's modulus for high-modulus single-filament materials; 1989. p. 128.
32. R.L. Goroware, W.E. Kosik, S.H. McKnight, and R.L. McCullough Molecular characterisation of glass fiber surface coatings for thermosetting polymer matrix/glass fiber composites Composites A 32 2001 323
33. Newman JG, Carlson BA, Michael RS, Moulder JF. Static SIMS handbook of polymer analysis. Perkin Elmer Corporation, Physical Electronics Division; 1991.
34. W.F. Thomas An investigation of the factors likely to affect the strength and properties of glass fibres Phys Chem Glass 1 1960 4
35. N.M. Cameron The effect of environment and temperature on the strength of E-glass fibres. Part 2. Heating and aging Glass Technol 9 1968 121
36. S. Sumio Effect of reheating on strength of glass fibres Bull Inst Chem Res 34 1956 316
37. A. Paul Chemical durability of glasses; a thermodynamic approach J Mater Sci 12 1977 2246
38. R.H. Doremus, Y. Mehrotra, W.A. Lanford, and C. Burman Reaction of water with glass: influence of a transformed surface layer J Mater Sci 18 1983 612
39. A.C.T. Hsu, and J.R. Schafner Surface degradation of E-Glass and S-Glass in the presence of water ACS Symp Ser 95 1979 41111
40. 2 glasses and its relationship with chemical reactivity Phys Chem Glasses 3 1962 116
41. S.Z. Vol'skaya, and S.A. Zaitseva Chemical-resistant glass for glass fibers Glass Ceram 35 1978 335
42. B. Wei, H. Cao, and S. Song Tensile behavior contrast of basalt and glass fibers after chemical treatment Mater Des 31 2010 4244