Markov reliability modeling for induction motor drives under field-oriented control

IEEE Transactions on Power Electronics

Volumn 27, Issue 2, 2012, Pages 534-546

  Bazzi, Ali M ^a,b   Dominguez Garcia, Alejandro ^a   Krein, Philip T ^a  

^a University of Illinois at Urbana Champaign   (United States)

^b DELPHI CORPORATION   (United States)

Author keywords

Fault impact assessment; induction motor drive; Markovs reliability model

Indexed keywords

CURRENT SENSORS; DRIVE TOPOLOGY; FAULT TOLERANCE MECHANISMS; FIELD ORIENTED CONTROL; IMPACT ASSESSMENTS; INDUCTION MOTOR DRIVE; MARKOVS RELIABILITY MODEL; MEAN TIME TO FAILURE; MOTOR DRIVE; RELIABILITY FACTOR; RELIABILITY MODEL; RELIABILITY MODELING; SIMULATION MODEL; SPEED ENCODERS;

DRIVES; ELECTRIC DRIVES; FAULT TOLERANCE; INDUCTION MOTORS; POWER ELECTRONICS; RELIABILITY ANALYSIS;

COMPUTER SIMULATION;

EID: 84855698397     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2011.2168543     Document Type: Article

References (45)

1. (2009). [Online]. Available: http://www. wired. com/thisdayintech/2009/ 12/1204gm-ev1-electric-car/
2. (2011). [Online]. Available: http://www. teslamotors. com/roadster/technology/motor
3. A. M. Bazzi, A. D. Dominguez-Garcia, and P. T. Krein, "A method for impact assessment of faults on the performance of field-oriented control drives: A first step to reliability modeling, " in Proc. IEEE Appl. Power Electron. Conf. Expo., 2010, pp. 256-263.
4. M. Rausand and A. Høyland, System Reliability Theory: Models, Statistical Methods, and Applications, 2nd ed. Hoboken, NJ: Wiley, 2005.
5. D. Kastha and B. K. Bose, "Investigation of fault modes of voltage-fed inverter system for inductionmotor drive, " IEEE Trans. Ind. Appl., vol. 30, no. 4, pp. 1028-1038, Jul./Aug. 1994.
6. J. Pontt, J. Rodriguez, J. Rebolledo, L. S. Martin, E. Cid, and G. Figueroa, "High-power LCI grinding mill drive under faulty conditions, " in Proc. Ind. Appl. Conf., 2005, pp. 670-673. (Pubitemid 44042519)
7. R. M. Tallam, D. W. Schlegel, and F. L. Hoadley, "Failure mode for ac drives on high resistance grounded systems, " in Proc. IEEE Appl. Power Electron. Conf. Expo., 2006, pp. 1587-1591. (Pubitemid 44523616)
8. Y. Yuexin and A. Y. Wu, "Transient response of electric drives under utility upset conditions, " in Proc. Pulp Paper Ind. Tech. Conf., 1996, pp. 77-85.
9. V. P. Shevchuk, "Investigations of the operation reliability increase of the alternating current electric machines in diamond extractive industries, " in Proc. Int. Sci. Practical Conf. Students, Post-Graduates Young Scientists: Modern Tech. Technol., 2002, pp. 103-104.
10. A. Fekih and F. N. Chowdhury, "A fault tolerant control design for induction motors, " in Proc. IEEE Int. Conf. Syst., Man Cybern., 2005, pp. 1320-1325. (Pubitemid 41667487)
11. S. Green, D. J. Atkinson, A. G. Jack, B. C. Mecrow, and A. King, "Sensorless operation of a fault tolerant PM drive, " IEE Proc. Elect. Power Appl., vol. 150, no. 2, pp. 117-125, Mar. 2003.
12. O. Jasim, C. Gerada, M. Sumner, and J. Arellano-Padilla, "Investigation of induction machine phase open circuit faults using a simplified equivalent circuit model, " in Proc. Int. Conf. Elect. Mach., 2008, pp. 1-6.
13. K. S. Lee and J. S. Ryu, "Instrument fault detection and compensation scheme for direct torque controlled induction motor drives, " IEE Proc. Control Theory Appl., vol. 150, no. 4, pp. 376-382, Jul. 2003.
14. O. Ondel, G. Clerc, E. Boutleux, and E. Blanco, "Fault detection and diagnosis in a set "Inverter-induction machine" through multidimensional membership function and pattern recognition, " IEEE Trans. Energy Convers., vol. 24, no. 2, pp. 431-441, Jun. 2009.
15. R. L. A. Ribeiro, C. B. Jacobina, E. R. C. Da Silva, and A. M. N. Lima, "Compensation strategies in the PWM-VSI topology for a fault tolerant induction motor drive system, " in Proc. IEEE Int. Symp. Diagnost. Elect. Mach., Power Electron. Drives, 2003, pp. 211-216.
16. R. B. Sepe, Jr., B. Fahimi, C. Morrison, and J. M. Miller, "Fault tolerant operation of induction motor drives with automatic controller reconfiguration, " in Proc. IEEE Int. Elect. Mach. Drives Conf., 2001, pp. 156-162.
17. W. G. Zanardelli, E. G. Strangas, and S. Aviyente, "Identification of intermittent electrical and mechanical faults in permanent-magnet ac drives based on time-frequency analysis, " IEEE Trans. Ind. Appl., vol. 43, no. 4, pp. 971-980, Jul./Aug. 2007. (Pubitemid 47249970)
18. M. T. Abolhassani and H. A. Toliyat, "Fault tolerant permanent magnet motor drives for electric vehicles, " in Proc. IEEE Int. Elect. Mach. Drives Conf., 2009, pp. 1146-1152.
19. J. C. Salmon and B. W. Williams, "A split-wound induction motor design to improve the reliability of PWM inverter drives, " IEEE Trans. Ind. Appl., vol. 26, no. 6, pp. 143-150, Jan./Feb. 1990.
20. J. W. Bennett, A. G. Jack, B. C. Mecrow, D. J. Atkinson, C. Sewell, and G. Mason, "Fault-tolerant control architecture for an electrical actuator, " in Proc. IEEE Power Electron. Spec. Conf., 2004, pp. 4371-4377.
21. O. Wallmark, L. Harnefors, and O. Carlson, "Control algorithms for a fault-tolerant PMSM drive, " IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1973-1980, Aug. 2007. (Pubitemid 47271270)
22. A. W. Williams, "High reliability 3-phase variable-frequency inverter, " IEE Proc. Electr. Power Appl., vol. 129, no. 6, pp. 353-354, Nov. 1982.
23. S. Bolognani, L. Peretti, L. Ssgarbossa, and M. Zigliotto, "Improvements in power line communication reliability for electric drives by random PWM techniques, " in Proc. IEEE Ind. Electron. Conf., 2006, pp. 2307-2312.
24. G. F. D'Addio, S. Savio, and P. Firpo, "Optimized reliability centered maintenance of vehicles electrical drives for high speed railway applications, " in Proc. IEEE Int. Symp. Ind. Electron., 1997, vol. 2, pp. 555-560.
25. F. A. DeWinter, R. Paes, R. Vermaas, and C. Gilks, "Maximizing large drive availability, " IEEE Ind. Appl. Mag., vol. 8, no. 4, pp. 66-75, Jul./Aug. 2002.
26. J. A. Oliver and D. Poteet, "High-speed, high-horsepower electric motors for pipeline compressors: Available ASD technology, reliability, harmonic control, " IEEE Trans. Energy Convers., vol. 10, no. 3, pp. 470-476, Sep. 1995.
27. R. Bozzo, V. Fazio, and S. Savio, "Power electronics reliability and stochastic performances of innovative ac traction drives: A comparative analysis, " in Proc. IEEE Power Tech. Conf., 2003, p. 7.
28. R. D. Klug and M. Griggs, "Reliability and availability of megawatt drive concepts, " in Proc. Int. Conf. Power Syst. Tech., 2004, pp. 665-671. (Pubitemid 40821440)
29. P. Wikstrom, L. A. Terens, and H. Kobi, "Reliability, availability, and maintainability of high-power variable-speed drive systems, " IEEE Trans. Ind. Appl., vol. 36, no. 1, pp. 231-241, Jan./Feb. 2000. (Pubitemid 30568852)
30. R. Letchmanan, J. T. Economou, A. Tsourdos, I. A. Ashokaraj, and B. A. White, "Fault evaluation of relative-coupled BLDC drives for multifacet mobile robot with distributed speed factors, " in Proc. IEEE Veh. Power Propulsion Conf., 2006, pp. 1-6.
31. M. H. J. Bollen and P. M. E. Dirix, "Simple model for post-fault motor behaviour for reliability/power quality assessment of industrial power systems, " IEE Proc. Generation, Transmiss. Distrib., vol. 143, no. 1, pp. 56-60, Jan. 1996. (Pubitemid 126765793)
32. M. Molaei, H. Oraee, and M. Fotuhi-Firuzabad, "Markov model of drivemotor systems for reliability calculation, " in Proc. IEEE Int. Symp. Ind. Electron., 2006, pp. 2286-2291.
33. W. Hainan, S. Pekarek, and B. Fahimi, "Multilayer control of an induction motor drive: A strategic step for automotive applications, " IEEE Trans. Power Electron., vol. 21, no. 3, pp. 676-686, May 2006.
34. A. Hirschmann, D. Tissen, S. Schroder, andR. W. DeDoncker, "Reliability prediction for inverters in hybrid electrical vehicles, " IEEE Trans Power Electron., vol. 22, no. 6, pp. 2511-2517, Nov. 2007. (Pubitemid 350154084)
35. K. J. P. Macken, I. T. Wallace, andM. H. J. Bollen, "Reliability assessment of motor drives, " in Proc. IEEE Power Electron. Spec. Conf., 2006, pp. 1-7.
36. W. G. Bouricius, W. C. Carter, and P. R. Schneider, "Reliability modeling techniques for self-repairing computer systems, " in Proc. ACM Annu. Conf./Annu. Meet., 1969, pp. 295-309.
37. P. C. Krause, O. Wasynczuk, and S. D. Sudhoff, Analysis of Electric Machinery and Drive Systems, 2nd ed. New York: Wiley-IEEE Press, 2002.
38. K. D. Jackson, M. D. McCulloch, and C. F. Landy, "A study of the suitability of electric drives to the task of driving conveyors, " in Proc. IEEE Ind. Appl. Soc. Annu. Meet., 1993, pp. 488-495.
39. A. F. Alshandoli, "Model-predicted induction motor behaviour under different operating conditions, " in Proc. Int. Conf. Elect. Eng., 2007, pp. 1-7.
40. A. D. Domínguez-García, J. G. Kassakian, J. E. Schindall, and J. J. Zinchuk, "An integrated methodology for the dynamic performance and reliability evaluation of fault-tolerant systems, " J. Rel. Eng. Syst. Safety, vol. 93, pp. 1628-1649, Nov. 2008.
41. eZdspF2812TM Tech. Ref. 506265-0001 Rev. F., Spectrum Digital, Inc., Stafford, TX, 2003.
42. J. Kimball, M. Amerhein, A. Kwasinski, J. Mossoba, B. Nee, Z. Sorchini, W. Weaver, J. Weels, and G. Zhang, "Modular inverter for advanced control applications, " Univ. Illinois, Urbana, IL, Rep. CEME-TR-200-01, 2006.
43. IEEE Standard Reliability Data for Pumps and Drivers, Valve Actuators, and Valves, ANSI/IEEE Standard 500, 1984.
44. Military Handbook Reliability Prediction of Electronics Equipment, US Department of Defense, MIL-HDBK-217 F, 1995.
45. A. Ristow, M. Begovic, A. Pregelj, and A. Rohatgi, "Development of a methodology for improving photovoltaic inverter reliability, " IEEE Trans. Ind. Electron., vol. 55, no. 7, pp. 2581-2592, Jul. 2008.