An insight into suspension plasma spray: Injection of the suspension and its interaction with the plasma flow

Journal of Thermal Spray Technology

Volumn 20, Issue 6, 2011, Pages 1310-1320

  Marchand, O ^a   Girardot, L ^b   Planche, M P ^a   Bertrand, P ^a   Bailly, Y ^b   Bertrand, G ^a  

^a UNIVERSITÉ DE TECHNOLOGIE DE BELFORT MONTBÉLIARD   (France)

^b FEMTO ST INSTITUTE   (France)

Author keywords

Diagnostics and control; Influence of process parameters; PIV; Suspension plasma spray

Indexed keywords

ATMOSPHERIC PLASMAS; ATOMIZING NOZZLE; COATING STRUCTURES; DIAGNOSTICS AND CONTROL; DROP SIZE; IN-FLIGHT PARTICLES; LIQUID VISCOSITY; MASS RATIO; MAXIMUM VALUES; MEDIAN VALUE; PARTICLE IMAGE VELOCIMETRY METHODS; PARTICLE VELOCITIES; PIV; PIV MEASUREMENTS; PROCESS PARAMETERS; SUSPENSION PLASMA SPRAY; SUSPENSION PLASMA SPRAYS; TWO-FLUID;

ATMOSPHERIC MOVEMENTS; BEHAVIORAL RESEARCH; DROPS; LIQUIDS; NOZZLE DESIGN; PLASMA JETS; PLASMA SPRAYING; PLASMAS; SPRAY NOZZLES; SURFACE TENSION; VELOCITY CONTROL; VELOCITY MEASUREMENT; YTTRIA STABILIZED ZIRCONIA; ZIRCONIA;

SUSPENSIONS (FLUIDS);

EID: 84855692470     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-011-9682-5     Document Type: Review

References (47)

1. P. Fauchais, M. Vardelle, J.F. Coudert, A. Vardelle, C. Delbos, and J. Fazilleau, Thermal Plasma Deposition from Thick to Thin Coatings and from Micro- to Nanostructure, Pure Appl. Chem., 2005, 77(2), p 475-485 (Pubitemid 40389416)
2. P. Fauchais, R. Etchart-Salas, V. Rat, J.F. Coudert, N. Caron, and K. Wittmann-Ténèze, Parameters Controlling Liquid Plasma Spraying: Solutions, Sols, or Suspensions, J. Therm. Spray Tech-nol., 2008, 17(1), p 31-59
3. P. Fauchais, V. Rat, J.F. Coudert, R. Etchart-Salas, and G. Montavon, Operating Parameters for Suspension and Solution Plasma-Spray Coatings, Surf. Coat. Technol., 2008, 202, p 4309-4317 (Pubitemid 351729096)
4. L. Pawlowski, Suspension and Solution Thermal Spray Coatings, Surf. Coat. Technol., 2009, 203, p 2807-2829
5. P. Fauchais and G. Montavon, Latest Developments in Suspension and Liquid Precursor Thermal Spraying, J. Therm. Spray Technol., 2010, 19(1-2), p 226-239
6. F. Ben-Ettouil, A. Denoirjean, A. Grimaud, G. Montavon, and P. Fauchais, Sub-Micrometer-Sized Y-PSZ Thermal Barrier Coatings Manufactured by Suspension Plasma Spraying: Process, Structure and Some Functional Properties, Proceedings of the 2009 International Thermal Spray Conference, Expanding Thermal Spray Performance to New Markets and Applications, 2009, p 193-199
7. A. Bacciochini, G. Montavon, J. Ilavsky, A. Denoirjean, and P. Fauchais, Porous Architecture of SPS Thick YSZ Coatings Structured at the Nanometer Scale (50 nm), J. Therm. Spray Technol., 2010, 19(1-2), p 198-206
8. H. Kassner, R. Siegert, D. Hathiramani,R. Vassen, and D. Stoever, ApplicationofSuspension PlasmaSpraying(SPS) forManufacture of Ceramic Coatings, J. Therm. Spray Technol., 2008, 17(1), p 115-123
9. R. Vassen, H. Kassner, A. Stuke, D.E. Mack, M.O. Jarligo, and D. Stover, Functionally Graded Thermal Barrier Coatings with Improved Reflectivity and High-Temperature Capability, Mater. Sci. Forum, 2010, 631-632, p 73-78
10. J. Oberste Berghaus, J.G. Legoux, C. Moreau, F. Tarasi, and T. Chraska, Mechanical and Thermal Transport Properties of Suspension Thermal Sprayed Alumina-Zirconia Composite Coatings, J. Therm. Spray Technol., 2008, 17(1), p 91-104
11. G. Darut, F. Ben-Ettouil, A. Denoirjean, G. Montavon, H. Ageorges, and P. Fauchais, Dry Sliding Behaviour of Sub-Micrometer-Sized Suspension Plasma Sprayed Ceramic Oxide Coatings, J. Therm. Spray Technol., 2010, 19(1-2), p 275-285
12. 3-YSZ Composite Coatings, Surf. Coat. Technol., 2010, 205(4), p 1004-1008
13. 3 Perovskite Films by Suspension Plasma Spraying for SOFC Cathode, Surf. Coat. Technol., 2006, 200, p 3743-3756 (Pubitemid 43246057)
14. R. Rampon, O. Marchand, C. Filiatre, and G. Bertrand, Influence of Suspension Characteristics on Coatings Microstructure Obtained by Suspension Plasma Spraying, Surf. Coat. Technol., 2008, 202(18), p 4337-4342 (Pubitemid 351729099)
15. D. Waldbillig and O. Kesler, Characterization of Metal-Supported Axial Injection Plasma Sprayed Solid Oxide Fuel Cells with Aqueous Suspension Plasma Sprayed Electrolyte Layers, J. Power Sources, 2009, 191, p 320-329
16. F.L. Toma, G. Bertrand, D. Klein, C. Coddet, and C. Meunier, Nanostructured Photocatalytic Titania Coatings Formed by Suspension Plasma Spraying, J. Therm. Spray Technol., 2006, 15(4), p 587-592 (Pubitemid 46116848)
17. 2 Coatings Microstructure, J. Therm. Spray Technol., 2008, 17(1), p 73-81
18. 2 for the Manufacture of Photovoltaic Cells, Surf. Coat. Technol., 2009, 203, p 2146-2149
19. R. Tomaszek, Z. Znamirowski, L. Pawlowski, and A. Wojnakowski, Temperature Behaviour of Titania Field Emitters Realized by Suspension, Surf. Coat. Technol., 2006, 201, p 2099-2102 (Pubitemid 44341064)
20. S. Kozerski, L. Pawlowski, R. Jaworski, F. Roudet, and F. Petit, Two zones Microstructure of Suspension Plasma Sprayed Hydroxyapatatite Coatings, Surf. Coat. Technol., 2010, 204, p 1380-1387
21. K.A. Gross and S. Saber-Samandari, Revealing Mechanical Properties of a Suspension Plasma Sprayed Coating with Nano-indentation, Surf. Coat. Technol., 2009, 203, p 2995-2999
22. R. Kumar, P. Cheang, and K.A. Khor, Phase Composition and Heat of Crystallisation of Amorphous Calcium Phosphate in Ultra-Fine Radio Frequency Suspension Plasma Sprayed Hydroxyapatatite Powders, Acta Mater., 2004, 52, p 1171-1181
23. J. Fazilleau, C. Delbos, V. Rat, J.F. Coudert, P. Fauchais, and B. Pateyron, Phenomena Involved in Suspension Plasma Spraying. Part 1. Suspension Injection and Behaviour, Plasma Chem. Plasma Process., 2006, 26, p 371-391 (Pubitemid 44121443)
24. P. Fauchais, V. Rat, C. Delbos, J.F. Coudert, T. Chartier, and L. Bianchi, Understanding of Suspension DC Plasma Spraying of Finely Structured Coatings for SOFC, IEE Trans. Plasma Sci., 2005, 33(2), p 920-930 (Pubitemid 40679303)
25. R. Vassen, H. Kassner, G. Mauer, and D. Stöver, Suspension Plasma Spraying: Process Characteristics and Applications, J. Therm. Spray Technol., 2010, 19(1-2), p 219-225
26. J. Oberste Berghaus, S. Bouaricha, J.G. Legoux, and C. Moreau, Injection Conditions and In-Flight Particle States in Suspension Plasma Spraying of Alumina and Zirconia Nano-Ceramics, Proceedings of the 2005 International Thermal Spray Conference, Thermal Spray: Building on 100 Years of Success, 2005, p 512-518
27. H. Kassner, R. Vassen, and D. Stöver, Study on Instant Droplet and Particle Stages During Suspension Plasma Spraying (SPS), Surf. Coat. Technol., 2008, 202, p 4355-4361 (Pubitemid 351729102)
28. R. Rampon, C. Filiatre, and G. Bertrand, Suspension Plasma Spraying of YPSZ Coatings: Suspension Atomization and Injection, J. Therm. Spray Technol., 2008, 17(1), p 105-114
29. R. Siegert, J.E. Döring, J.L. Marqués, R. Vassen, D. Sebold, and D. Stöver, Denser Ceramic Coatings Obtained by the Optimization of the Suspension Plasma Spraying Technique, Proceedings of the 2004 International Thermal Spray Conference, 2004, p 568-573
30. C.M. Varga, J.C. Lasheras, and E. Hopfinger, Initial Breakup of a Small-Diameter Liquid Jet by a High-Speed Gas Stream, J. Fluid Mech., 2003, 497, p 405-434 (Pubitemid 38171605)
31. P. Marmottant and E. Villermaux, On Spray Formation, J. Fluid Mech., 2003, 498, p 73-111 (Pubitemid 38241795)
32. P.D. Hede, P. Bach, and A.D. Jensen, Two-Fluid Spray Atomi-sation and Pneumatic Nozzles for Fluid Bed Coating/Agglomeration Purposes: A Review, Chem. Eng. Sci., 2008, 63, p 3821-3842
33. R. Etchart-Salas, V. Rat, J.F. Coudert, P. Fauchais, N. Caron, K. Wittman, and S. Alexandre, Influence of Plasma Instabilities in Ceramic Suspension Plasma Spraying, J. Therm. Spray Tech-nol., 2007, 16(5-6), p 857-865 (Pubitemid 350269038)
34. C. Marchand, A. Vardelle, G. Mariaux, and P. Lefort, Modelling of the Plasma Spray Process with Liquid Feedstock Injection, Surf. Coat. Technol., 2008, 202, p 4458-4464 (Pubitemid 351729115)
35. C. Marchand, C. Chazelas, G. Mariaux, and A. Vardelle, Liquid Precursor Plasma Spraying: Modelling the Interactions Between the Transient Plasma Jet and the Droplets, J. Therm. Spray Technol., 2007, 16(5-6), p 705-712 (Pubitemid 350269021)
36. P. Fauchais, R. Etchart-Salas, C. Delbos, M. Tognovi, V. Rat, J.F. Coudert, and T. Chartier, Suspension and Solution Plasma Spraying of Finely Structured Coatings, J. Phys. D Appl. Phys., 2007, 40, p 2394-2406 (Pubitemid 46778365)
37. J.F. Bisson, M. Lamontagne, and C. Moreau, Ensemble In-Flight Particle Diagnostics Under Thermal Spray Conditions, Proceedings of the 2001 International Thermal Spray Conference, ASM International, Materials Park, 2001, p 705-714
38. B.P. Husted, P. Petersson, I. Lund, and G. Holmstedt, Comparison of PIV and PDA Droplet Velocity Measurement Techniques on Two High-Pressure Water Mist Nozzles, Fire Saf J., 2009, 44, p 1030-1045
39. K.D. Driscoll, V. Sick, and C. Gray, Simultaneous Air/Fuel-Phase PIV Measurements in a Dense Fuel Spray, Exp. Fluids, 2003, 35, p 112-115 (Pubitemid 37005780)
40. Z. Wu, Z. Zhu, and Z. Huang, An Experimental Study on the Spray Structure of Oxygenated Fuel Using Laser-Based Visualization and Particle Image Velocimetry, Fuel, 2006, 85, p 458-1464
41. F.W. Bach, K. Möhwald, T. Rothardt, J. Prehm, L. Engl, K. Hartz, and B. Drossler, Particle Image Velocimetry in Thermal Spraying, Mater. Sci. Eng. A, 2004, 383, p 146-152 (Pubitemid 40533690)
42. A.P. Newbery, T. Rayment, and P.S. Grant, A Particle Image Velocimetry Investigation of In-Flight and deposition Behaviour of Steel Droplets During Electric Arc Sprayforming, Mater. Sci. Eng. A, 2004, 383, p 137-145 (Pubitemid 40533689)
43. F.W. Bach, K. Möhwald, L. Engl, B. Drossler, and K. Hartz, Particle Image Velocimetry in Thermal Spraying, Adv. Eng. Mater., 2006, 8(7), p 650-653 (Pubitemid 44179096)
44. S.H. Zahiri, W. Yang, and M. Jahedi, Characterization of Cold Spray Titanium Supersonic Jet, J. Therm. Spray Technol, 2009, 18(1), p 110-117
45. J. Pattison, S. Celotto, A. Khan, and W. O'Neill, Standoff Distance and Bow Shock Phenomena in the Cold Spray Process, Surf. Coat. Technol, 2008, 202(8), p 1443-1454 (Pubitemid 350246287)
46. D.L. Gilmore, R.C. Dykhuizen, RA. Neiser, TJ. Roemer, and M.J. Smith, Particle Velocity and Deposition Efficiency in the Cold Spray Process, J. Therm. Spray Technol., 1999, 8(4), p 576-582 (Pubitemid 32082324)
47. Z. Farago and N. Chigier, Morphological Classification of Disintegration of Round Liquid Jets in Coaxial Air Stream, Atom. Sprays, 1992, 2, p 137-153