Saturation and short pulse response characteristics of the fe-based amorphous core with a small air gap

IEEE Transactions on Plasma Science

Volumn 40, Issue 1, 2012, Pages 90-97

  Zhang, Yu ^a   Liu, Jinliang ^a   Feng, Jiahuai ^a  

^a NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY   (China)

Author keywords

Fe based amorphous core; high frequency pulse response; loss ratio; magnetic saturation; pulse transformer

Indexed keywords

AIR-GAPS; COUPLING COEFFICIENT; CROSS SECTION; CUT-THROUGH; FE-BASED AMORPHOUS CORE; HIGH FREQUENCY RESPONSE; HIGH-FREQUENCY PULSE; LOSS RATIO; MECHANICAL PROCESSING; RELATIVE PERMEABILITY; SATURATION CHARACTERISTIC; SATURATION VOLTAGE; SHORT PULSE; SQUARE PULSE; STEP-UP RATIO; THEORETICAL CALCULATIONS; VOLTAGE SIGNALS;

EXPERIMENTS; HIGH FREQUENCY TRANSFORMERS; MAGNETIC CORES; PULSE TRANSFORMERS; SATURATION MAGNETIZATION;

FREQUENCY RESPONSE;

EID: 84855641834     PISSN: 00933813     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPS.2011.2173806     Document Type: Article

References (34)

1. C. Strowitzki, A. Gortler, and M. Baumann, "Losses in magnetic switches," in Proc. Power Modulator Symp., 2002, pp. 214-216.
2. P. Kwapulinski, J. Rasek, Z. Stoklosa, and G. Haneczok, "Magnetic properties of amorphous and nanocrystalline alloys based on iron," J. Mater. Process. Technol., vol. 157/158, pp. 735-742, Dec. 2004.
3. T. Matsuura, K. Nagayama, and S. Hagiwara, "Long-term reliability of iron-based amorphous alloy cores for oil-immersed transformers," IEEE Trans. Magn., vol. 26, no. 5, pp. 1993-1995, Sep. 1990.
4. C. C. Chen, M. H. Shiao, and Y. C. Lin, "Investigation on the exchange coupling properties of ring-shaped MnIr/CoFe bilayers," IEEE Trans. Magn., vol. 47, no. 3, pp. 620-623, Mar. 2011.
5. I. Otsuka, T. Kadomura, K. Ishiyama, and M. Yagi, "Magnetic properties of Fe-based amorphous powder cores with high magnetic flux density," IEEE Trans. Magn., vol. 45, no. 10, pp. 4294-4297, Oct. 2009.
6. K. Masugata, H. Saitoh, and H. Maekawa, "Development of high voltage step-up transformer as a substitute for a Marx generator," Rev. Sci. Instrum., vol. 68, no. 5, pp. 2214-2220, May 1997. (Pubitemid 127639167)
7. T. Teranishi, K. Nojima, and S. Motegi, "A 600 kV Blumlein modulator for an X-band klystron," in Proc. 8th IEEE Int. Pulsed Power Conf., 1991, pp. 315-318.
8. T. Shidara, M. Akemoto, and M. Yoshidda, "Blumlein-type X-band klystron modulator for Japan linear collider," in Proc. Particle Accelerator Conf., 1991, vol. 2, pp. 1034-1036.
9. A. Tokuchi, N. Ninomiya, and W. H. Jiang, "Repetitive pulsed-power generator "ETIGO-IV"," IEEE Trans. Plasma Sci., vol. 30, no. 5, pp. 1637-1641, Oct. 2002.
10. D. V. Rose, C. L. Miller, and D. R. Welch, "Circuit models and threedimensional electromagnetic simulations of a 1MA liner transformer driver stage," Phys. Rev. Special Topics-Accelerators Beams, vol. 13, no. 9, p. 090 401, Sep. 2010.
11. A. A. Kim, M. G. Mazarakis, and V. I. Manylov, "Energy loss due to eddy current in linear transformer driver cores," Phys. Rev. Special Topics-Accelerators Beams, vol. 13, no. 7, p. 070 401, Jul. 2010.
12. Y. Zhang, J. L. Liu, and X. B. Cheng, "Output characteristics of a kind of high-voltage pulse transformer with closed magnetic core," IEEE Trans. Plasma Sci., vol. 38, no. 4, pp. 1019-1027, Apr. 2010.
13. Y. Zhang, J. L. Liu, and X. B. Cheng, "A compact high voltage pulse generator based on pulse transformer with closed magnetic core," Rev. Sci. Instrum., vol. 81, no. 3, pp. 033 302-1-033 302-7, Mar. 2010.
14. H. W. Lord, "Pulse transformers," IEEE Trans. Magn., vol. 7, no. 1, pp. 17-28, Mar. 1971.
15. E. M. M. Costa, "Planar transformers excited by square waves," Progr. Electromagn. Res.-PIER, vol. 100, pp. 55-68, 2010.
16. E. M. M. Costa, "Resonance on transformers excited by square waves and explanation of the high voltage on Tesla transformer," Progr. Electromagn. Res. B-PIER B, vol. 18, pp. 205-224, 2009.
17. E. M. M. Costa, "Resonance between planar coils vs ring coils excited by square waves," Progr. Electromagn. Res. B-PIER B, vol. 18, pp. 59-81, 2009.
18. S. C. Kim, S. S. Park, and S. H. Kim, "Development of air core type 500 kV HV pulse transformer," in Proc. IEEE Power Modulator Conf., 2005, pp. 696-699.
19. J. L. Liu, C. L. Li, and J. D. Zhang, "A spiral strip transformer type electron-beam accelerator," Laser Particle Beams, vol. 24, no. 3, pp. 355-358, 2006.
20. J. M. Wright, D. W. Lee, and A. Mohan, "Analysis of integrated solenoid inductor with closed magnetic core," IEEE Trans. Magn., vol. 46, no. 6, pp. 2387-2390, Jun. 2010.
21. M. Akemote and A. Tokuchi, "A 600 kV, 150 ns rise-time pulse transformer for klystron pulse modulator," in Proc. IEEE Int. Power Modulators High Voltage Conf., 2008, p. 396.
22. I. Otsuka, K. Wada, and Y. Maeta, "Magnetics properties of Fe-based amorphous powders with high-saturation induction produced by spinning water atomization process (SWAP)," IEEE Trans. Magn., vol. 44, no. 11, pp. 3891-3894, Nov. 2008.
23. H. K. Lachowicz and A. Siemko, "Unusual behavior of saturation magnetostriction in metallic glasses," IEEE Trans. Magn., vol. 25, no. 5, pp. 3605-3610, Sep. 1989. (Pubitemid 20641467)
24. M. Liniers, J. Flores, and F. J. Bermejo, "Systematic study of the temperature dependence of the saturation magnetization in Fe, Fe-Ni and Co-based amorphous alloys," IEEE Trans. Magn., vol. 25, no. 5, pp. 3663-3365, Sep. 1989.
25. K. W. Reed, L. X. Schneider, and G. E. Pena, "Magnetic modulator lifetime tests using the Sandia reliability test-bed," in Proc. 12th Int. Pulsed Power Conf., 1999, vol. 1, pp. 528-531.
26. L. Schneider, K. W. Reed, and H. Harjes, "Status of repetitive pulsed power at Sandia National Laboratories," in Proc. 12th IEEE Int. Pulsed Power Conf., 1999, pp. 523-527.
27. D. M. Sousa and G. D. Marques, "Study of the air gap magnetic field distribution of a nuclear magnetic resonance iron-core magnet," in Proc. IEEE Int. Conf. Comput. Technol. Elect. Electron. Eng., 2008, pp. 242-247.
28. A. E. Umenei, Y. Melikhov, and D. C. Jiles, "Analytical solutions for vibrations of magnetic fields in closed circuits: Examination of deviations from the standard Ampere's law equation," IEEE Trans. Magn., vol. 47, no. 4, pp. 734-737, Apr. 2011.
29. M. Barcaro and N. Bianchi, "Air-gap flux density distribution and iron losses in anisotropic synchronous motors," IEEE Trans. Magn., vol. 46, no. 1, pp. 121-126, Jan. 2010.
30. L. Zhu, S. Z. Jiang, Z. Q. Zhu, and C. C. Chan, "Analytical modeling of open-circuit air-gap field distributions in multisegment and multilayer interior permanent-magnet machines," IEEE Trans. Magn., vol. 45, no. 8, pp. 3121-3130, Aug. 2009.
31. I. M. Filanovsky and B. Moore, "Design of pulse-transmission transformer in inductive-coupling link," in Proc. 53rd IEEE Int. MWSCAS, 2010, pp. 1117-1120.
32. T. Filchev, F. Carostro, and P. Wheeler, "High voltage high frequency power transformer for pulsed power application," in Proc. 14th Int. EPE/PEMC, 2010, pp. T6-165-T6-170.
33. E. M. M. Costa, "Resonance on coils excited by square waves: Explaining Tesla transformer," IEEE Trans. Magn., vol. 46, no. 5, pp. 1186-1192, May 2010.
34. D. M. Barret, "Design criteria for a magnetic switch when used to discharge a pulse forming line," in Proc. Pulsed Power Conf., 1991, pp. 735-738.