Investigation of axial carrying capacity of radial hybrid magnetic bearing

IEEE Transactions on Magnetics

Volumn 48, Issue 1, 2012, Pages 38-46

  Eryong, Hou ^a   Kun, Liu ^a  

^a NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY   (China)

Author keywords

Axial resilience; passive stability stiffness; radial hybrid magnetic bearing; structural dimension

Indexed keywords

2-D MODEL; 3D FINITE ELEMENT MODEL; AIR-GAPS; AXIAL RESILIENCE; FINITE ELEMENT; HYBRID MAGNETIC BEARING; MAGNETIC CIRCUIT METHOD; MAGNETIC POLES; NUMERICAL RESULTS; PASSIVE STABILITY; STRUCTURAL DIMENSION; STRUCTURAL DIMENSIONS; THEORETICAL RESULT;

FINITE ELEMENT METHOD; MAGNETIC BEARINGS; MAGNETIC CIRCUITS; STIFFNESS; THREE DIMENSIONAL; THRUST BEARINGS;

MAGNETISM;

EID: 84855515683     PISSN: 00189464     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMAG.2011.2167018     Document Type: Article

References (31)

1. F. Jiancheng, S. Jinji, X. Yanliang, and W. Xi, "A new structure for permanent-magnet-biased axial hybrid magnetic bearings," IEEE Trans. Magn., vol. 45, no. 12, pp. 5319-5325, Dec. 2009.
2. F. Jiancheng, S. Jinji, L. Hu, and T. Jiqiang, "A novel 3-DOF axial hybrid magnetic bearing," IEEE Trans. Magn., vol. 46, no. 12, pp. 4034-4045, Dec. 2010.
3. X. Yanliang, D. Yueqin, W. Xiuhe, and K. Yu, "Analysis of hybrid magnetic bearing with a permanent magnet in the rotor by FEM," IEEE Trans. Magn., vol. 42, no. 4, pp. 1363-1366, Apr. 2006.
4. A. V. Filatov and E. H. Maslen, "Passive magnetic bearing for flywheel energy storage systems," IEEE Trans. Magn., vol. 37, no. 6, pp. 3913-3924, Nov. 2001. (Pubitemid 34035705)
5. J. P. Lee, B. J. Park, Y. H. Han, S. Y. Jung, and T. H. Sung, "Energy loss by drag force of superconductor flywheel energy storage system with permanent magnet rotor," IEEE Trans. Magn., vol. 44, no. 11, pp. 4397-4440, Nov. 2008.
6. M. H. Kimman, H. H. Langen, and R. H. M. Schmidt, "A miniature milling spindle with active magnetic bearings," Mechatronics, vol. 20, no. 2, pp. 224-235, Mar. 2010.
7. T. M. Lim et al., "Design and parameter estimation of hybrid magnetic bearings for blood pump applications," Mech. Syst. Signal Pr., vol. 23, no. 7, pp. 2352-2382, Oct. 2009.
8. K. Asami, A. Chiba, M. A. Rahman, T. Hoshino, and A. Nakajima, "Stiffness analysis of a magnetically suspended bearingless motor with permanent magnet passive positioning," IEEE Trans. Magn., vol. 41, no. 10, pp. 3820-3822, Oct. 2005. (Pubitemid 41584579)
9. C. R. Morrison, M. W. Siebert, and E. J. Ho, "Electromagnetic forces in a hybrid magnetic-bearing switched-reluctance motor," IEEE Trans. Magn., vol. 44, no. 12, pp. 4626-4638, Dec. 2008.
10. M. N. Sahinkaya1 and A. E. Hartavi, "Variable bias current in magnetic bearings for energy optimization," IEEE Trans. Magn., vol. 43, no. 3, pp. 1052-1060, Mar. 2007. (Pubitemid 46389272)
11. T. Azukizawa, S. Yamamoto, and N. Matsuo, "Feasibility study of a passive magnetic bearing using the ring shaped permanent magnets," IEEE Trans. Magn., vol. 44, no. 11, pp. 4277-4280, Nov. 2008.
12. P. Samanta and H. Hirani, "Magnetic bearing configurations: Theoretical and experimental studies," IEEE Trans. Magn., vol. 44, no. 2, pp. 292-300, Feb. 2008.
13. R. Ravaud, G. Lemarquand, and V. Lemarquand, "Force and stiffness of passive magnetic bearings using permanent magnets. Part 1: Axial magnetization," IEEE Trans. Magn., vol. 45, no. 7, pp. 2996-3002, Jul. 2009.
14. R. Ravaud, G. Lemarquand, and V. Lemarquand, "Force and stiffness of passive magnetic bearings using permanent magnets. Part 2: Radial magnetization," IEEE Trans. Magn., vol. 45, no. 9, pp. 3334-3342, Sept. 2009.
15. S. Earnshaw, "On the nature of the molecular forces which regulate the constitution of the lumiferous ether," Trans. Camb. Phil. Soc., vol. 7, pp. 97-112, 1842.
16. W. K. S. Khoo, K. Kalita, S. D. Garvey, R. J. Hill-Cottingham, D. Rodger, and J. F. Eastham, "Active axial-magnetomotive force parallel-airgap serial flux magnetic bearings," IEEE Trans. Magn., vol. 46, no. 7, pp. 2596-2602, Jul. 2010.
17. H. Y. Kim and C. W. Lee, "Analysis of eddy-current loss for design of small active magnetic bearings with solid core and rotor," IEEE Trans. Magn., vol. 40, no. 5, pp. 3293-3301, Sept. 2004.
18. S. Jinji and F. Jiancheng, "A novel structure of permanent magnet biased radial hybrid magnetic bearing," J. Magn. Magn. Mater., vol. 232, no. 2, pp. 202-208, Jan. 2011.
19. M. A. Pichot and M. D. Driga, "Loss reduction strategies in design of magnetic bearing actuators for vehicle applications," IEEE Trans. Magn., vol. 41, no. 1, pp. 492-496, Jan. 2005. (Pubitemid 40136341)
20. Z. Xusheng, D. Zhiquan, W. Xiaolin, and M. Lei, "Research status and development of permanent magnet biased magnetic bearings," Trans. China Electrotech. Soc., vol. 24, no. 9, pp. 9-20, Sept. 2009, (in Chinese).
21. Z. Dehong, C. Xin, and Z. Huangqiu, "Structure and performance analysis for AC-DC three degrees of freedom active magnetic bearings," in Power Electronics and Motion Control Conf., May 2009, pp. 2005-2009.
22. W. Qinghai, P. Wei, and H. Yizhou, "Principle and parameter design for an innovated radial-axial hybrid magnetic bearing," in Int. Conf. Electrical Machines and Systems, 2008, pp. 2142-2146.
23. K. Blumenstock and C. L. Brown, "Novel integrated radial and axial magnetic bearing," in Proc. 7th Int. Symp. Magnetic Bearings, Zurich, Aug. 2000, pp. 467-471, ETH.
24. C. W. Lee and H. S. Jeong, "Dynamic modeling and optimal control of conical cone-shaped active magnetic bearing systems," Control Eng. Pract., vol. 4, no. 10, pp. 1395-1403, Oct. 1996.
25. K. Hijikata, S. Kobayashi, M. Takemoto, Y. Tanaka, A. Chiba, and T. Fukao, "Basic characteristics of an active thrust magnetic bearing with a cylindrical rotor core," IEEE Trans. Magn., vol. 44, no. 11, pp. 4167-4170, Nov. 2008.
26. K. Hijikata, M. Takemoto, S. Ogasawara, A. Chiba, and T. Fukao, "Behavior of a novel thrust magnetic bearing with a cylindrical rotor on high speed rotation," IEEE Trans. Magn., vol. 45, no. 10, pp. 4617-4620, Oct. 2009.
27. L. Zhiqiang, "Calculation ofmagnetic force and stiffness for permanent magnet bearing," J. Magn. Mater. Devices, vol. 28, no. 1, pp. 25-30, Feb. 1997, (in Chinese).
28. L. Zhiqiang, X. Jinwei, L. Shaoke, and Y. Liming, "Research on magnetic bearing flywheels for attitude control of spacecraft," Syst. Eng. Electron., vol. 26, no. 1, pp. 52-55, Jan. 2004, (in Chinese).
29. D. Xiaodong, H. Pinglin, and W. Xiaoqing, "Research of permanent magnet biased magnetic bearing with a four-degree freedom," in Proc. 3rd Chin. Symp. Magnetic Bearings, Wuhan, China, Aug. 2009, pp. 190-193, (in Chinese).
30. H. Eryong and L. Kun, "Study on dynamic characteristics of magnetic suspending flywheel based on finite element method," in Proc. 12th Int. Symp. Magnetic Bearings, Wuhan, China, Aug. 2010, pp. 127-133.
31. L. Qiren and Z. Youmin, Principle of Magnetic Circuit Design (in Chinese). Beijing, China: China Machine Press, 1987.