Preparation, characterization and application of advanced isoconversional kinetics to epoxy/1,4-Bis(3-aminopropoxy) butane/MWCNT nanocomposite

Composites Part A: Applied Science and Manufacturing

Volumn 43, Issue 3, 2012, Pages 381-387

  Omrani, Abdollah ^a   Rostami, Abbas Ali ^a   Khostavan, Sepide ^a   Vazifeshenas, Yousef ^b  

^a UNIVERSITY OF MAZANDARAN   (Iran)

^b BABOL NOSHIRVANI UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

A. Theromosetting resin; B. Cure behavior; C. Analytical modeling; D. Thermal analysis

Indexed keywords

ADVANCED ISOCONVERSIONAL METHOD; B. CURE BEHAVIOR; BISPHENOL-A-DIGLYCIDYL ETHERS; C. ANALYTICAL MODELING; CURING TEMPERATURE; DYNAMIC MECHANICAL THERMAL ANALYSIS; FLYNN-WALL-OZAWA; FRACTURE SURFACE MORPHOLOGY; INTERFACIAL INTERACTION; ISO-CONVERSIONAL METHOD; ISOCONVERSIONAL KINETICS; NON-LINEAR INTEGRAL; THERMAL DECOMPOSITION TEMPERATURE;

ADHESION; BUTANE; CURING; DIFFERENTIAL SCANNING CALORIMETRY; DYNAMIC MECHANICAL ANALYSIS; GLASS TRANSITION; NANOCOMPOSITES; PHENOLS; PYROLYSIS; REACTION KINETICS; SCANNING ELECTRON MICROSCOPY; THERMOANALYSIS;

MULTIWALLED CARBON NANOTUBES (MWCN);

EID: 84855181527     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2011.12.005     Document Type: Article

References (29)

1. C.H. Chen, J.Y. Jian, and F.S. Yen Preparation and characterization of epoxy/γ-aluminum oxide nanocomposites Compos Part A: Appl Sci Manuf 40 2009 463 468
2. N. Chikhi, S. Fellahi, and M. Bakar Modification of epoxy resin using reactive liquid (ATBN) rubber Eur Polym J 38 2 2002 251 264 (Pubitemid 33039164)
3. A. Omrani, L.C. Simon, and A.A. Rostami The effects of alumina nanoparticle on the properties of an epoxy resin system Mater Chem Phys 114 2009 145 150
4. 2-epoxy nanocomposite Mater Sci Eng A 487 2008 574 585 (Pubitemid 351676800)
5. M. Imanaka, Y. Nakamura, A. Nishimura, and T. lida Fracture toughness of rubber-modified epoxy adhesives: effect of plastic deformability of the matrix phase Compos Sci Technol 63 1 2003 41 51 (Pubitemid 35451008)
6. A.L. Gerson, H.A. Bruck, A.R. Hopkins, and K.N. Segal Curing effects of single-wall carbon nanotube reinforcement on mechanical properties of filled epoxy adhesives Compos Part A: Appl Sci Manuf 41 2010 729 736
7. S. Iijima Helical microtubules Nature 354 1991 56 58
8. M.M.J. Treacy, T.W. Ebbesen, and J.M. Gibson Exceptionally high Young's modulus observed for individual carbon nanotubes Nature 381 1996 678 680 (Pubitemid 126515869)
9. E.W. Wong, P.E. Sheehan, and C.M. Lieber Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes Science 277 1997 1971 1975 (Pubitemid 27449134)
10. J.P. Salvetat, A.J. Kulik, J.M. Bonard, G.A.D. Briggs, T. Stockli, and K. Metenier Elastic modulus of ordered and disordered multiwalled carbon nanotubes Adv Mater 11 1999 161 165
11. Z. Spitalsky, D. Tasis, K. Papagelis, and C. Galiotis Carbon nanotube-polymer composites: chemistry, processing, mechanical and electrical properties Prog Polym Sci 35 2010 357 401
12. S. Rana, R. Alagirusamy, and M. Joshi A review on carbon epoxy nanocomposites J Reinf Plast Comp 28 2008 461 487
13. M. Abdalla, D. Dean, P. Robinson, and E. Nyairo Cure behavior of epoxy/MWCNT nanocomposites: the effect of nanotube surface modification Polymer 49 2008 3310 3317
14. A.B. Sulong, N. Muhamad, J. Sahari, R. Ramli, B.M. Deros, and J. Park Electrical conductivity behaviour of chemical functionalized MWCNTs epoxy nanocomposites European J Sci Res 29 2009 13 21
15. A. Yousefi, P.G. Lafleur, and R. Gauvin Kinetic studies of thermoset cure reactions: a review Polym Compos 18 1997 157 168 (Pubitemid 127602178)
16. N. Sbirrazzuoli, and S. Vyazovkin Learning about epoxy cure mechanisms from isoconversional analysis of DSC data Thermochim Acta 388 2002 289 298
17. S. Vyazovkin, and N. Sbirrazzuoli Mechanism and kinetics of epoxy-amine cure studied by differential scanning calorimetry Macromolecules 29 1996 1867 1873 (Pubitemid 126520573)
18. C.D. Doyle Kinetic analysis of thermogravimetric data J Appl Polym Sci 5 15 1961 285 292
19. C.D. Doyle Estimating isothermal life from thermogravimetric data J Appl Polym Sci 6 24 1962 639 642
20. T. Ozawa A new method of analyzing thermogravimetric data Bull Chem Soc Japan 38 11 1965 1881 1886
21. J.H. Flynn, and L.A. Wall A quick, direct method for the determination of activation energy from thermogravimetric data J Polym Sci Part B: Polym Lett 4 5 1966 323 328
22. L. Liqing, and C. Donghua Application of iso-temperature method of multiple rate to kinetic analysis: dehydration for calcium oxalate monohydrate J Therm Anal Cal 78 1 2004 283 293
23. W. Tang, Y. Liu, H. Zhang, and C. Wang New approximate formula for Arrhenius temperature integral Thermochim Acta 408 2003 39 43
24. A.W. Coats, and J.P. Redfern Kinetic parameters from thermogravimetric data Nature 201 1964 68 69
25. M.J. Starink The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods Thermochim Acta 404 2003 163 176
26. M.J. Starink Activation energy determination for linear heating experiments: deviations due to neglecting the low temperature end of the temperature integral J Mater Sci 42 2007 483 489 (Pubitemid 46201659)
27. N. Sbirrazzuoli, Y. Girault, and L. Elégant Simulations for evaluation of kinetic methods in differential scanning calorimetry. Part 3-Peak maximum evolution methods, isoconversional methods Thermochim Acta 293 1997 25
28. S. Vyazovkin Evaluation of activation energy of thermally stimulated solid-state reactions under arbitrary variation of temperature J Comput Chem 18 3 1997 393 402 (Pubitemid 127590532)
29. S. Vyazovkin Modification of the integral isoconversional method to account for variation in the activation energy J Comput Chem 22 2 2001 178 183 (Pubitemid 33646622)