A study on UV laser drilling of PEEK reinforced with carbon fibers

Optics and Lasers in Engineering

Volumn 50, Issue 3, 2012, Pages 449-457

  Romoli, L ^a   Fischer, F ^b   Kling, R ^b  

^a UNIVERSITY OF PISA   (Italy)

^b LASER ZENTRUM HANNOVER E V   (Germany)

Author keywords

Ablation; Carbon fiber; Drilling; Laser; PEEK

Indexed keywords

CONVENTIONAL LASERS; CUT EDGE; DRILLING PROCESS; ENERGY DENSITY; FIBER REINFORCED; ND-YAG LASERS; PERCUSSION DRILLING; THROUGH HOLE; UV LASERS;

ABLATION; DRILLING; ETHERS; FIBERS; HEAT AFFECTED ZONE; LAMINATED COMPOSITES; LASERS; NANOCOMPOSITE FILMS; NEODYMIUM LASERS; PAPER LAMINATES; POLYETHER ETHER KETONES; REINFORCED PLASTICS;

CARBON FIBERS;

EID: 84155170763     PISSN: 01438166     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.optlaseng.2011.10.008     Document Type: Article

References (23)

1. J. Flöck, K. Friedrich, and Q. Yuan On the friction and wear behaviour of PAN- and pitch-carbon fiber reinforced PEEK composites Wear 1999 304 311 (Pubitemid 30112878)
2. F. Mata, V.N. Gaitonde, S.R. Karnik, and J.P. Davim Influence of cutting conditions on machinability aspects of PEEK, PEEK CF 30 and PEEK GF 30 composites using PCD tools J Mater Process Technol 209 4 2009 1980 1987
3. A.A. Cenna, and P. Mathew Analysis and prediction of laser cutting parameters of bre reinforced plastics (FRP) composite material Int J Mach Tools Manuf 42 2002 105 113 (Pubitemid 33018534)
4. D. Herzog, P. Jaeschke, O. Meier, and H. Haferkamp Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRP Int J Mach Tools Manuf 48 2008 1464 1473
5. K.T. Voisey, S. Fouquet, D. Roy, and T.W. Clyne Fibre swelling during laser drilling of carbon fibre composites Opt Lasers Eng 44 2006 1185 1197 (Pubitemid 44137257)
6. J. Mathew, G.L. Goswami, N. Ramakrishnan, and N.K. Naik Parametric studies on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites J Mater Process Technol 8990 1999 198 203
7. W.S.O. Rodden, S.S. Kudesia, D.P. Hand, and J.D.C. Jones A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon bre composites Opt Commun 210 2002 319 328 (Pubitemid 34992208)
8. P. Moreno, C. Méndez, A. García, I. Arias, and L. Roso Femtosecond laser ablation of carbon reinforced polymers Appl Surf Sci 252 12 2006 4110 4119 (Pubitemid 44294548)
9. H.K. Tönshoff, D. Hesse, and J. Mommsen Micromachining using excimer lasers CIRP J Manuf Sci Technol 42/1 1993 247 251 (Pubitemid 23679044)
10. J. Meijer, K. Du, A. Gillner, D. Hoffmann, V.S. Kovalenko, T. Masuzawa, A. Ostendorf, R. Poprawe, and W. Schulz Machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons CIRP J Manuf Sci Technol 51 2 2002 531 550
11. O. Yalukova, and I. Sárady Investigation of interaction mechanisms in laser drilling of thermoplastic and thermoset polymers using different wavelengths Compos Sci Technol 66 2006 1289 1296
12. Völkermeyer F, Fischer F, Kling R. Advanced capabilities in machining of CFRP by innovative laser-based techniques. In: Proceedings of CFK-Valley Stade Convention, Germany; 2009. p. 349.
13. F. Fischer, L. Romoli, and R. Kling Laser-based repair of carbon fiber reinforced plastics CIRP J Manuf Sci Technol 59 1 2010 203 206
14. M. Prasad, P.F. Conforti, and B.J. Garrison On the role of chemical reactions in initiating ultraviolet laser ablation in poly(methyl methacrylate) J Appl Phys 101 10 2007 article number 103113
15. N. Bityurin, and A. Malyshev Bulk photothermal model for laser ablation of polymers by nanosecond and subpicosecond pulses J Appl Phys 92 1 2002 605 613
16. B. Zhang, and K.C. Yung Frequency-tripled Nd:YAG laser ablation in laser structuring process Opt Lasers Eng 44 2006 815 825
17. 〈http://www.coherent.com/Products/index.cfm?868/AVIA-Family-of-DPSS- Lasers〉, last access on septenber 24th 2011.
18. X.C. Wang, Z.L. Li, T. Chen, B.K. Lok, and D.K.Y. Low 355 nm DPSS UV laser cutting of FR4 and BT/epoxy-based PCB substrates Opt Lasers Eng 46 2008 404 409
19. V.E. Beal, R.A. Paggi, G.V. Salmoria, and A. Lago Statistical Evaluation of Laser Energy Density Effect on Mechanical Properties of Polyamide Parts Manufactured by Selective Laser Sintering J Appl Polym Sci 113 2009 2910 2919
20. L. Romoli, G. Tantussi, and G. Dini Layered Laser Vaporization of PMMA Manufacturing 3D Mould Cavities CIRP J Manuf Sci Technol 56/1 2007 209 212 (Pubitemid 46898282)
21. Z.L. Li, H.Y. Zheng, G.C. Lim, P.L. Chu, and L. Li Study on UV laser machining quality of carbon fiber reinforced composites Composites Part A 41 2010 1403 1408
22. R. Negarestani, M. Sundar, M.A. Sheikh, P. Mativenga, L. Li, Z.L. Li, P.L. Chu, C.C. Khin, H.Y. Zheng, and G.C. Lim Numerical simulation of laser machining of carbon-fibre-reinforced composites Proc Inst Mech Eng B: J Eng Manuf 2247 2010 1017 1027
23. S. Nolte, C. Momma, G. Kamlage, A. Ostendorf, C. Fallnich, F. von Alvensleben, and H. Welling Polarization effect in ultrashort-pulse laser drilling Appl Phys A 68 1999 563 567