Augmentation of peri-implant bone improves implant stability: Quantification using simulated bone loss

Journal of Orthopaedic Research

Volumn 30, Issue 2, 2012, Pages 178-184

  Wirth, Andreas J ^a   Müller, Ralph ^a   Van Lenthe, G Harry ^a,b  

^a ETH ZURICH   (Switzerland)

^b UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

bone augmentation; bone loss; micro finite element (micro FE) analysis; peri implant bone quality

Indexed keywords

ARTICLE; FINITE ELEMENT ANALYSIS; FRACTURE FIXATION; HUMAN; HUMERUS HEAD; IMPLANT; MODEL; OSTEOLYSIS; OSTEOPOROSIS; PRIORITY JOURNAL; QUANTITATIVE ANALYSIS; SIMULATION; VALIDATION PROCESS;

BIOMECHANICS; COMPUTER SIMULATION; FINITE ELEMENT ANALYSIS; FRACTURE FIXATION, INTERNAL; HUMANS; OSTEOPOROTIC FRACTURES;

EID: 83855160895     PISSN: 07360266     EISSN: 1554527X     Source Type: Journal    
DOI: 10.1002/jor.21532     Document Type: Article

References (31)

1. Riggs BL, Melton LJ III., 1995. The worldwide problem of osteoporosis: insights afforded by epidemiology. Bone 17 (5 Suppl): 505S-511S.
2. Schneider E, Goldhahn J, Burckhardt P,. 2005. The challenge: fracture treatment in osteoporotic bone. Osteoporos Int 16 (Suppl 2): S1-S2. (Pubitemid 46232114)
3. Guggenbuhl P, Meadeb J, Chalès G,. 2005. Osteoporotic fractures of the proximal humerus, pelvis, and ankle: epidemiology and diagnosis. Joint Bone Spine 72: 372-375. (Pubitemid 41415823)
4. Mathison C, Chaudhary R, Beaupre L, et al. 2010. Biomechanical analysis of proximal humeral fixation using locking plate fixation with an intramedullary fibular allograft. Clin Biomech 25: 642-646.
5. Krenn MH, Piotrowski WP, Penzkofer R, et al. 2008. Influence of thread design on pedicle screw fixation. Laboratory investigation. J Neurosurg Spine 9: 90-95. (Pubitemid 351948782)
6. Seebeck J, Goldhahn J, Städele H, et al. 2004. Effect of cortical thickness and cancellous bone density on the holding strength of internal fixator screws. J Orthop Res 22: 1237-1242. (Pubitemid 39317913)
7. Helwig P, Bahrs C, Epple B, et al. 2009. Does fixed-angle plate osteosynthesis solve the problems of a fractured proximal humerus? Acta Orthop 80: 92-96.
8. Seide K, Triebe J, Faschingbauer M, et al. 2007. Locked vs. unlocked plate osteosynthesis of the proximal humerus-a biomechanical study. Clin Biomech 22: 176-182. (Pubitemid 46038886)
9. Stadelmann VA, Bretton E, Terrier A, et al. 2010. Calcium phosphate cement augmentation of cancellous bone screws can compensate for the absence of cortical fixation. J Biomech 43: 2869-2874.
10. Gabet Y, Müller R, Levy J, et al. 2006. Parathyroid hormone 1-34 enhances titanium implant anchorage in low-density trabecular bone: a correlative micro-computed tomographic and biomechanical analysis. Bone 39: 276-282. (Pubitemid 43851377)
11. Boner V, Kuhn P, Mendel T, et al. 2009. Temperature evaluation during PMMA screw augmentation in osteoporotic bone-an in vitro study about the risk of thermal necrosis in human femoral heads. J Biomed Mater Res B Appl Biomater 90: 842-848.
12. Neer RM, Arnaud CD, Zanchetta JR, et al. 2001. Effect of parathyroid hormone (1-34) on fractures and bone mineral density in postmenopausal women with osteoporosis. N Engl J Med 344: 1434-1441. (Pubitemid 32402100)
13. Kajiwara H, Yamaza T, Yoshinari M, et al. 2005. The bisphosphonate pamidronate on the surface of titanium stimulates bone formation around tibial implants in rats. Biomaterials 26: 581-587. (Pubitemid 38988300)
14. Stadelmann VA, Gauthier O, Terrier A, et al. 2008. Implants delivering bisphosphonate locally increase periprosthetic bone density in an osteoporotic sheep model. A pilot study. Eur Cell Mater 16: 10-16.
15. Wirth AJ, Goldhahn J, Flaig C, et al. Implant stability is affected by local bone microstructural quality. Bone. 49: 473-478.
16. Hildebrand T, Laib A, Müller R, et al. 1999. Direct three-dimensional morphometric analysis of human cancellous bone: microstructural data from spine, femur, iliac crest, and calcaneus. J Bone Miner Res 14: 1167-1174. (Pubitemid 29314060)
17. Müller R,. 2005. Long-term prediction of three-dimensional bone architecture in simulations of pre-, peri- and post-menopausal microstructural bone remodeling. Osteoporos Int 16 (Suppl 2): S25-S35. (Pubitemid 46232118)
18. Croucher PI, Garrahan NJ, Mellish RW, et al. 1991. Age-related changes in resorption cavity characteristics in human trabecular bone. Osteoporos Int 1: 257-261.
19. van Rietbergen B, H. Weinans H, Huiskes R, et al. 1996. Computational strategies for iterative solutions of large FEM applications employing voxel data. Int J Numer Method Eng 39: 2743-2767. (Pubitemid 126648046)
20. MacNeil JA, Boyd SK,. 2008. Bone strength at the distal radius can be estimated from high-resolution peripheral quantitative computed tomography and the finite element method. Bone 42: 1203-1213.
21. Arbenz P, van Lenthe GH, Mennel U, et al. 2008. A scalable multi-level preconditioner for matrix-free δ-finite element analysis of human bone structures. Int J Numer Method Eng 73: 927-947. (Pubitemid 351308542)
22. Boutroy S, Bouxsein ML, Munoz F, et al. 2005. In vivo assessment of trabecular bone microarchitecture by high-resolution peripheral quantitative computed tomography. J Clin Endocrinol Metab 90: 6508-6515. (Pubitemid 41759306)
23. Chen H, Zhou X, Shoumura S, et al. 2010. Age- and gender-dependent changes in three-dimensional microstructure of cortical and trabecular bone at the human femoral neck. Osteoporos Int 21: 627-636.
24. Homminga J, van Rietbergen B, Lochmüller EM, et al. 2004. The osteoporotic vertebral structure is well adapted to the loads of daily life, but not to infrequent "error" loads. Bone 34: 510-516. (Pubitemid 38314915)
25. Kazakia GJ, Hyun B, Burghardt AJ, et al. 2008. In vivo determination of bone structure in postmenopausal women: a comparison of HR-pQCT and high-field MR imaging. J Bone Miner Res 23: 463-474. (Pubitemid 351501886)
26. Gibson LJ, Ashby MF,. 1997. Cellular solids: structure and properties, 2nd ed. Cambridge Solid State Science Series. Cambridge: Cambridge University Press. p xviii, 510.
27. Wirth AJ,. 2011. Assessment of implant stability in low quality bone by micro-structural finite element analysis. PhD thesis No 19595, ETH Zurich, Zurich, Switzerland.
28. Hernandez CJ, Keaveny TM,. 2006. A biomechanical perspective on bone quality. Bone 39: 1173-1181. (Pubitemid 44827914)
29. Gabet Y, Kohavi D, Voide R, et al. 2010. Endosseous implant anchorage is critically dependent on mechanostructural determinants of peri-implant bone trabeculae. J Bone Miner Res 25: 575-583.
30. Wirth AJ, Mueller TL, Vereecken W, et al. 2010. Mechanical competence of bone-implant systems can accurately be determined by image-based micro-finite element analyses. Arch Appl Mech 80: 513-525.
31. Röderer G, Gebhard F, Krischak G, et al. 2011. Biomechanical in vitro assessment of fixed angle plating using a new concept of locking for the treatment of osteoporotic proximal humerus fractures. Int Orthop. 35: 535-541.