A functional classification framework for the conceptual design of additive manufacturing technologies

Journal of Mechanical Design

Volumn 133, Issue 12, 2011, Pages

  Williams, Christopher B ^a   Mistree, Farrokh ^b   Rosen, David W ^c  

^a State University   (United States)

^b University of Oklahoma   (United States)

^c GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

additive manufacturing; conceptual design; design for manufacture; functional decomposition

Indexed keywords

CONCEPTUAL DESIGN; DESIGN FOR MANUFACTURABILITY;

ADDITIVE MANUFACTURING PROCESS; ADDITIVE MANUFACTURING TECHNOLOGY; CLASSIFICATION FRAMEWORK; DESIGN FOR MANUFACTURE; DESIGN METHODOLOGY; FUNCTIONAL CLASSIFICATION; FUNCTIONAL DECOMPOSITION; METAL ARTIFACTS; MORPHOLOGICAL MATRIXES; THREE-DIMENSIONAL-PRINTING;

3D PRINTERS;

EID: 83455186775     PISSN: 10500472     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.4005231     Document Type: Article

References (73)

1. Levy, G. N., Schindel, R., and Kruth, J. P., 2003, "Rapid Manufacturing and Rapid Tooling With Layer Manufacturing (Lm) Technologies, State of the Art and Future Perspectives," CIRP Ann., 52(2), pp. 589-609.
2. Kruth, J. P., 1991, "Material Increase Manufacturing by Rapid Prototyping Techniques," CIRP Ann. -Manuf. Technol., 40(2), pp. 577-639.
3. Greul, M., Petzoldt, F., Greulich, M., and Wunder, J., 1997, "Rapid Prototyping Moves on Metal Powders," Metal Powder Report, 52(10), pp. 24-27.
4. Pham, D. T., and Gault, R. S., 1998, "A Comparison of Rapid Prototyping Technologies," Int. J. Mach. Tools Manuf., 38, pp. 1257-1287. (Pubitemid 128428197)
5. Derby, B., and Reis, N., 2003, "Inket Printing of Highly Loaded Particulate Suspensions," Mater. Res. Soc. Bull., 28(11), pp. 815-818.
6. Gibson, I., Rosen, D. W., and Stucker, B., 2009, Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, Springer, New York.
7. Pahl, G., and Beitz, W., 1996, Engineering Design: A Systematic Approach, Springer-Verlag, London.
8. Kruth, J. P., Mercelis, P., Froyen, L., and Rombouts, M., 2004, "Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 44-59.
9. Cormier, D., Harrysson, O., and West, H., 2004, "Characterization of H13 Steel Produced Via Electron Beam Melting," Rapid Prototyping J., 10(1), pp. 35-41.
10. Michaels, S., Sachs, E. M., and Cima, M. J., 1992, "Metal Parts Generation by Three Dimensional Printing," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 244-250.
11. Greulich, M., 1997, "Rapid Prototyping and Fabrication of Tools and Metal Parts by Laser Sintering of Metal Powders," Mater. Technol., 12(5), pp. 155-157.
12. Utela, B., Anderson, R. L., and Kuhn, H., 2006, "Advanced Ceramic Materials and Three-Dimensional Printing (3dp)," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 290-303.
13. Beaman, J. J., Barlow, J. W., Bourell, D. L., Crawford, R. H., Marcus, H. L., and Mcalea, K. P., 1997, Solid Freeform Fabrication: A New Direction in Manufacturing, Kluwer Academic Publishers, Boston, Mass.
14. Evans, R. S., Bourell, D. L., Beaman, J., and Campbell, M. I., 2005, "Rapid Manufacturing of Silicon Carbide Composites," Rapid Prototyping J., 11(1), pp. 37-40. (Pubitemid 40242608)
15. Solidica, 2004, "Solidica: Direct to Metal Aluminum Tooling for Advanced Manufacturing," www.solidica.com/technology.html
16. Bender, B. A., Rayne, R. J., and Jessen, T. L., 2001, "Laminated Object Manufacturing of Functional Ceramics," Ceram. Eng. Sci. Proc. 22(4), pp. 127-134.
17. Das, A., Madras, G., Dasgupta, N., and Umarji, A. M., 2003, "Binder Removal Studies in Ceramic Thick Shapes Made by Laminated Object Manufacturing," J. Eur. Ceram. Soc., 23, pp. 1013-1017. (Pubitemid 36270386)
18. Liu, Z. E., Ko, T. C., Best, J., Cawley, J. D., and Heuer, A. H., 1997, "Cam-Lem Processing: Materials Flexibility," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 379-382.
19. Himmer, T., Nakagawa, T., and Noguchi, H., 1997, "Stereolithography of Ceramics," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 363-369.
20. 3D Systems, 2007, "3d Modeling & Desktop Prototyping with V-Flash," http:// www.modelin3d.com/
21. Agarwala, M. K., Jamalabad, V. R., Langrana, N. A., Safari, A., Whalen, P. J., and Danforth, S. C., 1996, "Structural Quality of Parts Processed by Fused Deposition," Rapid Prototyping J., 2(4), pp. 4-19. (Pubitemid 126637034)
22. Watson, J. K., Taminger, K. M. B., Hafley, R. A., and Peterson, D. D., 2002, "Development of a Prototype Electron Beam Freeform Fabrication System," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 458-465.
23. Greul, M., Pintat, T., and Greulich, M., 1996, "Rapid Prototyping of Functional Metallic and Ceramic Parts Using the Multiphase Jet Solidification (MJS) Process," Advances in Powder Metallurgy and Particulate Materials, Washington, DC, 2, pp. 7.281-7.287.
24. Rice, C. S., Mendez, P. F., and Brown, S. B., 2000, "Metal Solid Freeform Fabrication Using Semi-Solid Slurries," Member J. Miner., Met. Mater. Soc., 52(12), pp. 31-33. (Pubitemid 32137115)
25. Orme, M., Liu, Q., and Smith, R., 2000, "Molten Aluminum Micro-Droplet Formation and Deposition for Advanced Manufacturing Applications," Alum. Trans. J., 3(1), pp. 95-103.
26. Grau, J., Moon, J., Uhland, S., Cima, M. J., and Sachs, E., 1997, "High Green Density Ceramic Components Fabricated by the Slurry-Based 3dp Process," Metal Solid Freeform Fabrication Using Semi-Solid Slurries, Austin, TX, pp. 371-378.
27. Huang, T., Mason, M. S., Hilmas, G. E., and Leu, M. C., 2006, "Freeze-Form Extrusion Fabrication of Ceramic Parts," Int. J. Virtual Phys. Prototyping, 1(2), pp. 93-100.
28. Griffith, M. L., and Halloran, J. W., 1994, "Ultraviolet Curable Ceramic Suspensions for Stereolithography of Ceramics," International Mechanical Engineering Congress and Exposition, Chicago, IL, pp. 529-534.
29. Sirringhaus, H., and Shimoda, T., 2003, "Inkjet Printing of Functional Materials," Mater. Res. Soc. Bull., 28(11), pp. 802-806.
30. Johnson, R. W., Park, J.-H., Lackey, W. J., and Rosen, D. W., 2003, "Advances in Laser Chemical Vapor Depostion of Metals and Ceramics," International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal.
31. Crocker, J. E., Lianchao, S., Ansquer, H., Shaw, L. L., and Marcus, H. L., 1999, "Processing and Characterization of Saldvi Ceramic Structures," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 495-501.
32. Morissette, S. L., Lewis, J. A., Cesarno, J., Dimos, D. B., and Baer, T., 2000, "Solid Freeform Fabrication of Aqueous Alumina-Poly(Vinyl Alcohol) Gelcasting Suspensions," J. Am. Ceram. Soc., 83(10), pp. 2409-2416.
33. Khoshnevis, B., Bukkapatnam, S., Kwon, H., and Saito, J., 2001, "Experimental Investigation of Contour Crafting Using Ceramic Materials," Rapid Prototyping J., 7(1), pp. 32-41. (Pubitemid 32690550)
34. Vaidyanathan, R., Lombardi, J. L., Walish, J., Kasichainula, S., Calvert, P., and Cooper, K., 1999, "Extrusion Freeform Fabrication of Functional Ceramic Prototypes," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 327-334.
35. Li, X., Choi, H., and Yang, Y., 2002, "Micro Rapid Prototyping System for Micro Components," Thin Solid Films, 420-421, pp. 515-523. (Pubitemid 35459771)
36. Yang, S., and Evans, J. R. G., 2004, "Acoustic Control of Powder Dispensing in Open Tubes," Powder Technol., 139, pp. 55-60. (Pubitemid 38050139)
37. Percin, G., and Khuri-Yakub, B. T., 2003, "Piezoelectric Droplet for Ink-Jet Printing of Fluids and Solid Particles," Rev. Sci. Instrum., 74(2), pp. 1120-1127.
38. Lu, X., Yang, S., Chen, L., and Evans, J. R. G., 2006, "Dry Powder Microfeeding System for Solid Freeform Fabrication," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 636-643.
39. Sachs, E. M., 2000, "Powder Dispensing Apparatus Using Vibration," U.S. Patent No. 6,036,777.
40. Blazdell, P. F., Evans, J. R. G., Edirisinghe, M. J., Shaw, P., and Binstead, M. J., 1995, "The Computer Aided Manufacture of Ceramics Using Multilayer Jet Printing," J. Mater. Sci. Lett., 14, pp. 1562-1565.
41. Slade, C. E., and Evans, J. R. G., 1998, "Freeforming Ceramics Using a Thermal Jet Printer," J. Mater. Sci. Lett., 17, pp. 1669-1671. (Pubitemid 128510130)
42. Kumar, A. V., Dutta, A., and Fay, J. E., 2004, "Electrophotographic Printing of Part and Binder Powders," Rapid Prototyping J., 10(1), pp. 7-13.
43. Karlsen, R., and Reitan, J., 2003, "Metal Printing-Development of a New Rapid Manufacturing Process for Metal and Ceramic Objects," International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, pp. 569-589.
44. Desktop Factory, 2007, "Desktop Factory: 3d Printers," http://www.desktopfactory. com/
45. Hopkinson, N., and Erasenthiran, P., 2004, "High Speed Sintering-Early Research Into a New Rapid Manufacturing Process," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 312-320.
46. Thomas, H. R., Hopkinson, N., and Erasenthiran, P., 2007, "High Speed Sintering-Continuing Research into a New Rapid Manufacturing Process," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 682-691.
47. Limaye, A., and Rosen, D. W., 2006, "Process Planning for Mask Projection Stereolithography," Rapid Prototyping J., 12(5), pp. 76-84.
48. White, D., and Carmein, D. E. E., 2002, "Ultrasonic Object Consolidation System and Method," U.S. Patent No. 6,463,349.
49. Evans, J. R. G., 2001, "Direct Ink Jet Printing of Ceramics: Experiment in Teleology," Br. Ceram. Trans., 100(3), pp. 124-128. (Pubitemid 34108688)
50. Fu, Q., Jongprateep, O., Abbott, A., and Dogan, F., 2006, "Freeze-Spray Processing of Layered Ceramic Composites," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 339-348.
51. Kruth, J. P., Mercelis, P., and Van Vaerenbergh, J., 2005, "Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting," Rapid Prototyping J., 11(1), pp. 26-36. (Pubitemid 40242607)
52. Phenix Systems, 2005, "Phenix Systems Products," http://www.phenix-systems. com/home-en.php
53. Kruth, J. P., Mercelis, P., Vanvaerenbergh, J., Froyen, L., and Mrombouts, M., 2003, "Advances in Selective Laser Sintering," International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, pp. 59-69.
54. Agarwala, M., Bourell, D., Beaman, J., Marcus, H., and Barlow, J., 1995, "Direct Selective Laser Sintering of Metals," Rapid Prototyping J., 1(1), pp. 26-36.
55. Jardini, A. L., Maciel, R., Scarparo, M. A., Andrade, S. R., and Moura, L. F., 2003, "The Development in Infrared Stereolithography Using Thermosensitive Polmers," International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, pp. 273-277.
56. Geving, B., Kataria, A., Moore, C., Ebert-Uphoff, I., Kurfess, T. R., and Rosen, D. W., 2000, "Conceptual Design of a Generalized Stereolithography Machine," Japan-USA Symposium on Flexbile Automation, Ann Arbor, MI.
57. Clarinval, A., Carrus, R., and Dormal, T., 2003, "Development of Material for Optoform Process," International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, pp. 279-282.
58. Stratasys, 2007, "The Added Convenience of Waterworks," February 2007, http://www.stratasys.com/systems-misc.aspx?id=132
59. Mott, M., Song, J. H., and Evans, J. R. G., 1999, "Microengineering of Ceramics by Direct Ink-Jet Printing," J. Am. Ceram. Soc., 82(7), pp. 1653-1658.
60. Hedges, M., and Keicher, D. M., 2002, "Laser Engineered Net Shaping-Technology and Applications," C. E. Bocking, et al., 3rd National Conference on Rapid Prototyping, Rapid Tooling, and Rapid Manufacturing, Buckinghamshire, UK, pp. 17-23.
61. Zwicky, F., 1967, "The Morphological Approach to Discovery, Invention, Research and Construction," New Methods of Thought and Procedure, Springer-Verlag, New York, pp. 273-297.
62. Williams, C. B., Mistree, F., and Rosen, D. W., 2005, "Investigation of Solid Freeform Fabrication Processes for the Manufacture of Parts With Designed Mesostructure," ASME IDETC Design for Manufacturing and the Life Cycle Conference, Long Beach, California, DETC2005=DFMLC-84832.
63. Williams, C. B., Mistree, F., and Rosen, D. W., 2005, "Towards the Design of a Layer-Based Additive Manufacturing Process for the Realization of Metal Parts of Designed Mesostructure," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 217-230.
64. Seepersad, C. C., Kumar, R. S., Allen, J. K., Mistree, F. M., and Mcdowell, D. L., 2004, "Multifunctional Design of Prismatic Cellular Materials," J. Comput.-Aided Mater. Des., 11(2), pp. 163-181. (Pubitemid 40890934)
65. Wang, H. V., Johnston, S. R., and Rosen, D. W., 2006, "Design of a Graded Cellular Structure for an Acetabular Hip Replacement Component," International Solid Freeform Fabrication Symposium, Austin, TX, pp. 111-123.
66. Wang, H., and Rosen, D. W., 2002, "Computer-Aided Design Methods for Additive Fabrication of Truss Structures," International Conference on Manufacturing Automation, Hong Kong.
67. Cochran, J. K., Lee, K. J., Mcdowell, D. L., and Sanders, T. H., 2002, "Multifunctional Metallic Honeycombs by Thermal Chemical Processing," Processing and Properties of Lightweight Cellular Metals and Structures (TMS), Seattle, WA, pp. 127-136.
68. Lewis, J. A., 2000, "Colloidal Processing of Ceramics," J. Am. Ceram. Soc., 83(10), pp. 2341-2359.
69. Grida, I., and Evans, J. R. G., 2003, "Extrusion Freeforming of Ceramics Through Fine Nozzles," J. Eur. Ceram. Soc., 23, pp. 629-635. (Pubitemid 36141413)
70. Hinczewski, C., Corbel, S., and Chartier, T., 1998, " Stereolithography for the Fabrication of Ceramic Three-Dimensional Parts," Rapid Prototyping J., 4(3), pp. 104-111. (Pubitemid 128725112)
71. Williams, C. B., and Rosen, D. W., 2007, "Manufacturing Cellular Materials via Three-Dimensional Printing of Spray-Dried Metal Oxide Ceramic Powder," International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal.
72. Williams, C. B., 2008, "Design and Development of a Layer-Based Additive Manufacturing Process for the Realization of Metal Parts of Designed Mesostructure," Ph.D. thesis, Georgia Institute of Technology, Atlanta, GA.
73. Williams, C. B., Mistree, F., and Rosen, D. W., 2008, "The Systematic Design of a Layered Manufacturing Process for the Realization of Metal Parts of Designed Mesostructure," ASME International Design Engineering Technical Conferences, Brooklyn, NY, DETC2004=DEC-49457.