Surface chemical immobilization of parylene C with thermosensitive block copolymer brushes based on N-isopropylacrylamide and N-tert-butylacrylamide: Synthesis, characterization, and cell adhesion/detachment

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 100, Issue 1, 2012, Pages 217-229

  Zhang, Changhong ^a,b   Vernier, P Thomas ^c   Wu, Yu Hsuan ^c   Yang, Wangrong ^c  

^a UNIVERSITY OF SOUTHERN CALIFORNIA   (United States)

^b PITTSBURG STATE UNIVERSITY   (United States)

^c University of Southern California   (United States)

Author keywords

block copolymer; cell adhesion; cell material interactions; polymerization; surface modification

Indexed keywords

ACRYLIC MONOMERS; AMIDES; ATOM TRANSFER RADICAL POLYMERIZATION; BLOCK COPOLYMERS; CELL ADHESION; CELL CULTURE; FIBROBLASTS; FREE RADICAL REACTIONS; HYDROPHILICITY; POLYMERIZATION; SUBSTRATES; SURFACE TREATMENT; TISSUE CULTURE;

CELL-MATERIAL INTERACTION; LOWER CRITICAL SOLUTION TEMPERATURE; N- ISOPROPYLACRYLAMIDE; N-TERT-BUTYLACRYLAMIDE; POLY(N-ISOPROPYL ACRYLAMIDE) (PNIPAM); SURFACE INITIATED-ATOM TRANSFER RADICAL POLYMERIZATION; THERMOSENSITIVE BLOCK COPOLYMERS; WIDE TEMPERATURE RANGES;

CELL IMMOBILIZATION;

CHLORINE; COPOLYMER; N TERTBUTYLACRYLAMIDE; PARYLENE C; POLY(N ISOPROPYLACRYLAMIDE); UNCLASSIFIED DRUG;

ARTICLE; ATOM TRANSFER RADICAL POLYMERIZATION; BIOCOMPATIBILITY; CELL ADHESION; CELL AGGREGATION; CELL CULTURE; CELL GROWTH; CELL STRUCTURE; CHEMICAL ANALYSIS; CONTROLLED STUDY; HEAT SENSITIVITY; HUMAN; HUMAN CELL; HYDROPHOBICITY; SKIN FIBROBLAST; SYNTHESIS; TEMPERATURE; TEMPERATURE DEPENDENCE; THERMOSENSITIVE GENIC MALE STERILITY;

EID: 82955194457     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31941     Document Type: Article

References (65)

1. Boyle J, Maeder A, Bell J, John S, Scott R,. Medical device research. Expert Rev Med Devices 2005; 2: 41-45. (Pubitemid 40124899)
2. Bienkiewicz J,. Plasma-enhanced parylene coating for medical device applications. Med Device Technol 2006; 17: 10-11.
3. Cheung HY, Lau KT, Lu TP, Hui D,. A critical review on polymer-based bio-engineered materials for scaffold development. Compos B Eng 2007; 38: 291-300. (Pubitemid 46149453)
4. Ramakrishna S, Mayer J, Wintermantel E, Leong KW,. Biomedical applications of polymer-composite materials: A review. Compos Sci Technol 2001; 61: 1189-1224. (Pubitemid 32657276)
5. Sun Y, Lacour SP, Brooks RA, Rushton N, Fawcett J, Cameron RE,. Assessment of the biocompatibility of photosensitive polyimide for implantable medical device use. J Biomed Mater Res A 2009; 90: 648-655.
6. Burke M, Clarke B, Rochev Y, Gorelov A, Carroll W,. Estimation of the strength of adhesion between a thermoresponsive polymer coating and nitinol wire. J Mater Sci Mater Med 2008; 19: 1971-1979. (Pubitemid 351436304)
7. Fujii K, Matsumoto HN, Koyama Y, Iwasaki Y, Ishihara K, Takakuda K,. Prevention of biofilm formation with a coating of 2-methacryloyloxyethyl phosphorylcholine polymer. J Vet Med Sci 2008; 70: 167-173. (Pubitemid 351366453)
8. Negroiu G, Piticescu RM, Chitanu GC, Mihailescu IN, Zdrentu L, Miroiu M,. Biocompatibility evaluation of a novel hydroxyapatite-polymer coating for medical implants (in vitro tests). J Mater Sci Mater Med 2008; 19: 1537-1544.
9. Beshchasna N, Adolphi B, Granovsky S, Braunschweig M, Schneider W, Uhlemann J, Wolter KJ,. Influence of artificial body fluids and medical sterilization procedures on chemical stability of parylene C. 2010 Proc 60th Electron Comp Technol Conf (ECTC) 2010; 1846-1852.
10. Herrera-Alonso M, McCarthy TJ,. Chemical surface modification of poly(p-xylylene) thin films. Langmuir 2004; 20: 9184-9.
11. Hahn AW, Yasuda HK, James WJ, Nichols MF, Sadhir RK, Sharma AK, Pringle OA, York DH, Charlson EJ,. Glow discharge polymers as coatings for implanted devices. Biomed Sci Instrum 1981; 17: 109-13.
12. Chang TY, Yadav VG, De Leo S, Mohedas A, Rajalingam B, Chen CL, Selvarasah S, Dokmeci MR, Khademhosseini A,. Cell and protein compatibility of parylene-C surfaces. Langmuir 2007; 23: 11718-11725. (Pubitemid 350133020)
13. Chang TY, Yadav VG, De Leo S, Mohedas A, Rajalingam B, Chen CL, Selvarasah S, Dokmeci MR, Khademhosseini A,. Cell and protein compatibility of parylene-C surfaces. Langmuir 2007; 23: 11718-11725. (Pubitemid 350133020)
14. Pruden KG, Sinclair K, Beaudoin S,. Characterization of parylene-N and parylene-C photooxidation. J Polym Sci A Polym Chem 2003; 41: 1486-1496. (Pubitemid 36510854)
15. Lange K, Grimm S, Rapp M,. Chemical modification of parylene C coatings for SAW biosensors. Sens Actuat B Chem 2007; 125: 441-446. (Pubitemid 47095222)
16. Demirel MC, So E, Ritty TM, Naidu SH, Lakhtakia A,. Fibroblast cell attachment and growth on nanoengineered sculptured thin films. J Biomed Mater Res B Appl Biomater 2007; 81B: 219-223. (Pubitemid 46493633)
17. Cetinkaya M, Boduroglu S, Demirel MC,. Growth of nanostructured thin films of poly (p-xytylene) derivatives by vapor deposition. Polymer 2007; 48: 4130-4134. (Pubitemid 46935238)
18. Cheng X, Wang Y, Hanein Y, Bohringer KF, Ratner BD,. Novel cell patterning using microheater-controlled thermoresponsive plasma films. J Biomed Mater Res A 2004; 70: 159-168. (Pubitemid 38988747)
19. Ohya S, Nakayama Y, Matsuda T,. Thermoresponsive artificial extracellular matrix for tissue engineering: Hyaluronic acid bioconjugated with poly(N-isopropylacrylamide) grafts. Biomacromolecules 2001; 2: 856-863. (Pubitemid 32894643)
20. Okajima S, Yamaguchi T, Sakai Y, Nakao S,. Regulation of cell adhesion using a signal-responsive membrane substrate. Biotechnol Bioeng 2005; 91: 237-243. (Pubitemid 41158950)
21. Yamato M, Utsumi M, Kushida A, Konno C, Kikuchi A, Okano T,. Thermo-responsive culture dishes allow the intact harvest of multilayered keratinocyte sheets without dispase by reducing temperature. Tissue Eng 2001; 7: 473-480. (Pubitemid 32734778)
22. Feil H, Bae YH, Feijen J, Kim SW,. Effect of comonomer hydrophilicity and ionization on the lower critical solution temperature of N-isopropylacrylamide copolymers. Macromolecules 1993; 26: 2496-2500.
23. Allen LT, Fox EJ, Blute I, Kelly ZD, Rochev Y, Keenan AK, Dawson KA, Gallagher WM,. Interaction of soft condensed materials with living cells: Phenotype/transcriptome correlations for the hydrophobic effect. Proc Natl Acad Sci USA 2003; 100: 6331-6336. (Pubitemid 36666581)
24. Wang J, Chen L, Zhao Y, Guo G, Zhang R,. Cell adhesion and accelerated detachment on the surface of temperature-sensitive chitosan and poly(N-isopropylacrylamide) hydrogels. J Mater Sci Mater Med 2009; 20: 583-590.
25. Schmaljohann D, Oswald J, Jorgensen B, Nitschke M, Beyerlein D, Werner C,. Thermo-responsive PNiPAAm-g-PEG films for controlled cell detachment. Biomacromolecules 2003; 4: 1733-1739. (Pubitemid 37455587)
26. Wahjudi PN, Oh JH, Salman SO, Seabold JA, Rodger DC, Tai YC, Thompson ME,. Improvement of metal and tissue adhesion on surface-modified parylene C. J Biomed Mater Res A 2009; 89: 206-214.
27. LK I, GP L,. Lower critical solubility temperature materials as biofouling release agents. J Ind Microbiol Biotechnol 1998; 20: 121-125.
28. Kikuchi A, Okano T,. Intelligent thermoresponsive polymeric stationary phases for aqueous chromatography of biological compounds. Prog Polym Sci 2002; 27: 1165-1193. (Pubitemid 34614062)
29. Von Recum H, Okano T, Wan Kim S,. Growth factor release from thermally reversible tissue culture substrates. J Control Release 1998; 55: 121-130. (Pubitemid 28477603)
30. Mizutani A, Kikuchi A, Yamato M, Kanazawa H, Okano T,. Preparation of thermoresponsive polymer brush surfaces and their interaction with cells. Biomaterials 2008; 29: 2073-2081.
31. Yamato M, Okuhara M, Karikusa F, Kikuchi A, Sakurai Y, Okano T,. Signal transduction and cytoskeletal reorganization are required for cell detachment from cell culture surfaces grafted with a temperature-responsive polymer. J Biomed Mater Res 1999; 44: 44-52. (Pubitemid 28544084)
32. Demirel G, Rzaev Z, Patir S, Piskin E,. Poly(N-isopropylacrylamide) layers on silicon wafers as smart DNA-sensor platforms. J Nanosci Nanotechnol 2009; 9: 1865-1871.
33. Kong B, Choi JS, Jeon S, Choi IS,. The control of cell adhesion and detachment on thin films of thermoresponsive poly[(N-isopropylacrylamide)-r-((3- (methacryloylamino) propyl)-dimethyl(3-s ulfopropyl)ammonium hydroxide)]. Biomaterials 2009; 30: 5514-5522.
34. Akiyama Y, Kikuchi A, Yamato M, Okano T,. Ultrathin poly(N- isopropylacrylamide) grafted layer on polystyrene surfaces for cell adhesion/detachment control. Langmuir 2004; 20: 5506-5511.
35. Tsuda Y, Kikuchi A, Yamato M, Sakurai Y, Umezu M, Okano T,. Control of cell adhesion and detachment using temperature and thermoresponsive copolymer grafted culture surfaces. J Biomed Mater Res A 2004; 69: 70-78. (Pubitemid 38364962)
36. Canavan HE, Cheng X, Graham DJ, Ratner BD, Castner DG,. Surface characterization of the extracellular matrix remaining after cell detachment from a thermoresponsive polymer. Langmuir 2005; 21: 1949-1955. (Pubitemid 40338626)
37. Yamazaki M, Tsuchida M, Kobayashi KY, Takezawa T, Mori Y,. A novel method to prepare multicellular spheroids from varied cell types. Biotechnol Bioeng 1995; 48: 17-24.
38. Xu FJ, Zhong SP, Yung LY, Kang ET, Neoh KG,. Surface-active and stimuli-responsive polymer-Si(100) hybrids from surface-initiated atom transfer radical polymerization for control of cell adhesion. Biomacromolecules 2004; 5: 2392-2403. (Pubitemid 39585294)
39. Gristina AG,. Biomaterial-centered infection: microbial adhesion versus tissue integration. Science 1987; 237: 1588-1595. (Pubitemid 17134883)
40. Tunc M, Cheng X, Ratner BD, Meng E, Humayun M,. Reversible thermosensitive glue for retinal implants. Retina 2007; 27: 938-942. (Pubitemid 47479390)
41. Perrier S, Armes SP, Wang XS, Malet F, Haddleton DM,. Copper(I)-mediated radical polymerization of methacrylates in aqueous solution. J Polym Sci A Polym Chem 2001; 39: 1696-1707. (Pubitemid 32446857)
42. Masci G, Giacomelli L, Crescenzi V,. Atom transfer radical polymerization of N-isopropylacrylamide. Macromol Rapid Commun 2004; 25: 559-564.
43. Tan KL, Woon LL, Wong HK, Kang ET, Neoh KG,. Surface modification of plasma-pretreated poly(tetrafluoroethylene) films by graft-copolymerization. Macromolecules 1993; 26: 2832-2836. (Pubitemid 23680259)
44. Ye JD, Narain R,. Water-assisted atom transfer radical polymerization of N-isopropylacrylamide: Nature of solvent and temperature. J Phys Chem B 2009; 113: 676-681.
45. Bin Hussein MZ, Long CW, Zainal Z, Yahaya AH,. Synthesis of organic-inorganic hybrid nanocomposite material: Alizarin-3-sulfonate in the lamella of zinc-aluminium-layered double dydroxide. Micro- Nanotechnol Mater Process Packaging Syst II 2005; 5650: 548-556. (Pubitemid 40786925)
46. Ratner BD,. Biomaterials Science: An Introduction to Materials in Medicine. San Diego: Academic Press; 1996.
47. Masci G, Giacomelli L, Crescenzi V,. Atom transfer radical polymerization of N-isopropylacrylamide. Macromol Rapid Commun 2004; 25: 559-564.
48. Matyjaszewski K,. Controlled/Living Radical Polymerization: Progress in ATRP, NMP, and RAFT. Washington, DC: American Chemical Society, Distributed by Oxford University Press; 2000.
49. Wu C, Wang XH,. Globule-to-coil transition of a single homopolymer chain in solution. Phys Rev Lett 1998; 80: 4092-4094. (Pubitemid 128621859)
50. Xia Y, Yin XC, Burke NAD, Stover HDH,. Thermal response of narrow-disperse poly(N-isopropylacrylamide) prepared by atom transfer radical polymerization. Macromolecules 2005; 38: 5937-5943. (Pubitemid 41048607)
51. Kubota K, Fujishige S, Ando I,. Single-chain transition of poly(N-isopropylacrylamide) in water. J Phys Chem 1990; 94: 5154-5158.
52. Fujishige S, Itou S,. Chromic Materials and its Applications. Tokyo: CMC; 1989.
53. Rochev Y, Golubeva T, Gorelov A, Allen L, Gallagher WM, Selezneva I, Gavrilyuk B, Dawson K,. Surface modification for controlled cell growth on copolymers of N-isopropylacrylamide. Prog Colloid Polym Sci 2001; 118: 153-156.
54. Zhang C, Wen X, Vyavahare NR, Boland T,. Synthesis and characterization of biodegradable elastomeric polyurethane scaffolds fabricated by the inkjet technique. Biomaterials 2008; 29: 3781-3791.
55. Kowalczynska HM, Nowak-Wyrzykowska M,. Modulation of adhesion, spreading and cytoskeleton organization of 3T3 fibroblasts by sulfonic groups present on polymer surfaces. Cell Biol Int 2003; 27: 101-114. (Pubitemid 36349302)
56. Webb K, Hlady V, Tresco PA,. Relative importance of surface wettability and charged functional groups on NIH 3T3 fibroblast attachment, spreading, and cytoskeletal organization. J Biomed Mater Res 1998; 41: 422-430. (Pubitemid 28300107)
57. Ito Y,. Surface micropatterning to regulate cell functions. Biomaterials 1999; 20: 2333-2342.
58. Qin T, Yang Z, Cai S,. Interaction of cell adhesion to materials in tissue engineering. Zhongguo Xiu Fu Chong Jian Wai Ke Za Zhi 1999; 13: 31-37.
59. Lynch I, Blute IA, Zhmud B, MacArtain P, Tosetto M, Allen LT, Byrne HJ, Farrell GF, Keenan AK, Gallagher WM, Dawson KA. Correlation of the adhesive properties of cells to N-isopropylacrylamide/N-tert-butylacrylamide copolymer surfaces with changes in surface structure using contact angle measurements, molecular simulations, and Raman spectroscopy. Chem Mater 2005; 17: 3889-3898. (Pubitemid 41120059)
60. Chen G, Imanishi Y, Ito Y,. Effect of protein and cell behavior on pattern-grafted thermoresponsive polymer. J Biomed Mater Res 1998; 42: 38-44. (Pubitemid 28412995)
61. Tengevall P, Lundstrom I, Lieberg B,. Protein adsorption studies on model organic surfaces: An ellipsometric and infrared spectroscopic approach. Biomaterials 1998; 19: 407-422. (Pubitemid 28246062)
62. Kushida A, Yamato M, Konno C, Kikuchi A, Sakurai Y, Okano T,. Decrease in culture temperature releases monolayer endothelial cell sheets together with deposited fibronectin matrix from temperature-responsive culture surfaces. J Biomed Mater Res 1999; 45: 355-362. (Pubitemid 29196682)
63. Yamato M, Konno C, Kushida A, Hirose M, Utsumi M, Kikuchi A, Okano T,. Release of adsorbed fibronectin from temperature-responsive culture surfaces requires cellular activity. Biomaterials 2000; 21: 981-986. (Pubitemid 30145688)
64. Day ES, Osborn L, Whitty A,. Effect of divalent cations on the affinity and selectivity of alpha4 integrins towards the integrin ligands vascular cell adhesion molecule-1 and mucosal addressin cell adhesion molecule-1: Ca2+ activation of integrin alpha4beta1 confers a distinct ligand specificity. Cell Commun Adhes 2002; 9: 205-219. (Pubitemid 36367406)
65. Sigurdson SL, Lwebuga-Mukasa JS,. Divalent cation-dependent regulation of rat alveolar epithelial cell adhesion and spreading. Exp Cell Res 1994; 213: 71-79. (Pubitemid 24227384)