Computational nonlinear vibration analysis of gear pairs using a three-dimensional model

Proceedings of the ASME Design Engineering Technical Conference

Volumn 6, Issue , 2009, Pages 149-165

  Eritenel, Tugan ^a   Parker, Robert G ^b  

^a The Ohio State University   (United States)

^b SHANGHAI JIAO TONG UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL DYNAMIC ANALYSIS; CONTACT LINES; DEFLECTION MODE; EXPERIMENTAL MEASUREMENTS; GEAR CONTACTS; GEAR MESHES; MESH STIFFNESS; NON-LINEAR VIBRATIONS; NON-LINEARITY; NONLINEAR VIBRATION ANALYSIS; PARTIAL CONTACT; RIGID BODY; SINGLE SPRING; SIX DEGREES OF FREEDOM; STIFFNESS MODEL; TEETH CONTACT; THREE-DIMENSIONAL MODEL; TOOTH MODIFICATIONS; VIBRATION MODES;

COMPUTER GRAPHICS; DESIGN; DYNAMIC ANALYSIS; FINITE ELEMENT METHOD; GEAR TEETH; HELICAL GEARS; MODAL ANALYSIS; NONLINEAR ANALYSIS; STIFFNESS; THREE DIMENSIONAL; VIBRATING CONVEYORS;

VIBRATION ANALYSIS;

EID: 82155201878     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC2009-87485     Document Type: Conference Paper

References (42)

1. Blankenship, G.W., and Singh, R., 1995. "A new gearmesh interface dynamic model to predict multi dimensional force coupling and excitation". Mechanism and Machine Theory, 30(1), Jan., pp. 43-57.
2. Blankenship, G. W., and Singh, R., 1995. "Dynamic force transmissibility in helical gear pairs". Mechanism and Machine Theory, 30(3), Apr., pp. 323-339.
3. Kahraman, A., 1993. "Effect of axial vibrations on the dynamics of a helical gear pair". Journal of Vibration and Acoustics, 115(1), Jan., pp. 33-39.
4. Rigaud, E., Perret-Liaudet, J., and Mecibah, M. S., 2007. "Effect of an original gear mesh modeling on the gearbox dynamic behavior". International Design Engineering Technical Conferences and Computers and Information in Engineering, Sep. 4-7. Proceedings of ASME, Las Vegas, NV, DETC2007/34070.
5. Mark, W. D., 1978. "Analysis of the vibratory excitation of gear systems: Basic theory". Journal of the Acoustic Society of America, 63, pp. 1409-1430.
6. Hayashi, K., 1963. "Load distribution on the contact line of helical gear teeth (part 1 fundamental concept)". Bulletin of JSME, 6(22), pp. 336-343.
7. Hayashi, K., and Sayama, T., 1963. "Load distribution on the contact line of helical gear teeth (part 2 gears of large tooth width)". Bulletin of JSME, 6(22), pp. 344-351.
8. Conry, T. F., and Seireg, A., 1973. "Mathematical programming technique for evaluation of load distribution and optimal modification for gear systems". Journal of Engineering for Industry, 95(4), pp. 1115-1122.
9. Matsumura, S., Umezawa, K., and Houjoh, H., 1996. "Rotational vibration of a helical gear pair having tooth surface deviation during transmission of light load". JSME International Journal, Series C, 39(3), pp. 614-620.
10. Kubo, A., 1978. "Stress condition, vibration exciting force and contact pattern of helical gears with manufacturing and alignment error". Journal of Mechanical Design, 100, Jan., pp. 77-84.
11. Andersson, A., and Vedmar, L., 2003. "A dynamic model to determine vibrations in involute helical gears". Journal of Sound and Vibration, 260(2), Feb., pp. 195-212.
12. Velex, P., andMaatar,M., 1996. "A mathematical model for analyzing the influence of shape deviations and mounting errors on gear dynamic behavior". Journal of Sound and Vibration, 191(5), Apr., pp. 629-660.
13. Ajmi, M., and Velex, P., 2005. "A model for simulating the quasi static and dynamic behaviour of solid wide faced spur and helical gears". Mechanism and Machine Theory, 40(2), Feb., pp. 173-190.
14. Velex, P., Maatar, M., and Raclot, J. P., 1997. "Some numerical methods for the simulation of geared transmission dynamic behavior formulation and assessment". Journal of Mechanical Design, 119(2), June, pp. 292-298.
15. Raclot, J. P., and Velex, P., 1999. "Simulation of the dynamic behaviour of single and multi-stage geared systems with shape deviations and mounting errors by using a spectral method". Journal of Sound and Vibration, 220(5),Mar., pp. 861-903.
16. Eritenel, T., and Parker, R. G., 2005. "A static and dynamic model for three-dimensional multi-mesh gear systems". International Design Engineering Technical Conferences and Computers and Information in Engineering, Sep. 24-28. Proceedings of ASME, Long Beach, CA, DETC2005/PTG-85673.
17. Umezawa, K., Ajima, T., and Houjoh, H., 1986. "Vibration of three axis gear system". Bulletin of JSME, 29(249),Mar., pp. 950-957.
18. Kahraman, A., and Blankenship, G. W., 1999. "Effect of involute tip relief on dynamic response of spur gear pairs". Journal of Mechanical Design, 121(5), June, pp. 313-315.
19. Baud, S., and Velex, P., 2002. "Static and dynamic tooth loading in spur and helical geared systems-experiments and code validation". Journal of Mechanical Design, 124(2), June, pp. 334-346.
20. Ogawa, Y., Matsumura, S., Houjoh, H., Sato, T., and Umezawa, K., 2000. "Rotational vibration of a spur gear pair considering tooth helix deviation: Development of simulator and verification". JSME International Journal, Series C, 43(2), pp. 423-431.
21. Harris, S. L., 1958. "Dynamic loads on the teeth of spur gears". IMechE Applied Mechanics, 172, pp. 87-100.
22. Gregory, R.W., Harris, S. L., andMunro, R. G., 1963. "Dynamic behavior of spur gears". IMechE AppliedMechanics, 178(8), pp. 261-266.
23. Houser, D. R., and Borner, J., 1996. "Friction and bending moments on gear noise excitations". SAE Transactions, 105(6), May, pp. 1669-1676.
24. Vijayakar, S. M., 1991. "A combined surface integral and finite-element solution for a three-dimensional contact problem". International Journal for Numerical Methods in Engineering, 31(3), Mar., pp. 525-545.
25. Vijayakar, S. M., 2005. Helical3D User's Manual. Advanced Numerical Solutions, Hilliard, Ohio, USA, Feb. http://www.ansol.us/Manuals/ Helical3DManual.pdf.
26. Tamminana, V. K., Kahraman, A., and Vijayakar, S. M., 2007. "A study of the relationship between the dynamic factors and the dynamic transmission error of spur gear pairs". Journal of Mechanical Design, 129(1), Jan., pp. 75-84.
27. Singh, A., 2007. "Influence of planetary needle bearings on the performance of single and double pinion planetary systems". Journal of Mechanical Design, 129(1), Jan., pp. 85- 94.
28. Singh, A., 2005. "Application of a system level model to study the planetary load sharing behavior". Journal of Mechanical Design, 127(3), May, pp. 469-476.
29. Parker, R. G., Vijayakar, S. M., and Imajo, T., 2000. "Nonlinear dynamic response of a spur gear pair: Modelling and experimental comparisons". Journal of Sound and Vibration, 237(3), Oct., pp. 435-455.
30. Parker, R. G., Agashe, V., and Vijayakar, S. M., 2000. "Dynamic response of a planetary gear system using a finite element/contact mechanics model". Journal of Mechanical Design, 122(3), Sept., pp. 304-310.
31. Ambarisha, V. K., and Parker, R. G., 2007. "Nonlinear dynamics of planetary gears using analytical and finite element models". Journal of Sound and Vibration, 302(3), May, pp. 577-595.
32. Liu, G., and Parker, R. G., 2008. "Dynamic modeling and analysis of tooth profile modification for multimesh gear vibration". Journal of Mechanical Design, 130(2), Dec. DOI: 10.1115/1.2976803.
33. Liu, G., and Parker, R. G., 2008. "Impact of tooth friction and its bending effect on gear dynamics". Journal of Sound and Vibration, 320(4-5), Mar., pp. 1039-1063.
34. Liu, G., and Parker, R. G., 2008. "Nonlinear dynamics of idler gear systems". Nonlinear Dynamics, 53(4), Sept., pp. 345-367.
35. Chang, S., Houser, D. R., and Harianto, J., 2003. "Tooth flank corrections of wide face width helical gears that account for shaft deflections". International Design Engineering Technical Conferences and Computers and Information in Engineering. Proceedings of ASME, Chicago, IL, DETC2003/PTG-48072.
36. Litvin, F. L., Fuentes, A., Gonzalez-Perez, I., Carnevali, L., and Kawasaki, K., 2003. Modified involute helical gears: Computerized design, simulation of meshing, and stress analysis. Tech. Rep. ARL-CR-514, NASA.
37. Ozguven, H. N., and Houser, D. R., 1988. "Dynamic analysis of high speed gears by using loaded static transmission error". Journal of Sound and Vibration, 125(1), Aug., pp. 71-83.
38. Velex, P., and Ajmi, M., 2006. "On the modelling of excitations in geared systems by transmission errors". Journal of Sound and Vibration, 290(3-5), Mar., pp. 882-909.
39. Kahraman, A., and Blankenship, G. W., 1999. "Effect of involute contact ratio on spur gear dynamics". Journal of Mechanical Design, 121(1), Mar., pp. 112-118.
40. Kahraman, A., and Blankenship, G.W., 1996. "Interactions between commensurate parametric and forcing excitations in a system with clearance". Journal of Sound and Vibration, 194(3), pp. 317-336.
41. Bahk, C.-J., and Parker, R. G., 2008. "Nonlinear dynamics of planetary gears with equal planet spacing". Journal of Computational and Nonlinear Dynamics(Submitted).
42. Natsiavas, S., Theodossiades, S., and Goudas, I., 2000. "Dynamic analysis of piecewise linear oscillators with time periodic coefficients". International Journal of Non-Linear Mechanics, 35(1), Jan., pp. 53-68.