A novel structure for low-loss radial hybrid magnetic bearing

IEEE Transactions on Magnetics

Volumn 47, Issue 12, 2011, Pages 4725-4733

  Eryong, Hou ^a   Kun, Liu ^a  

^a NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY   (China)

Author keywords

Equivalent magnetic circuit; integrative magnetic pole board; parameter design; radial hybrid magnetic bearing

Indexed keywords

AIR-GAPS; BIAS MAGNETIC FIELD; EDDY CURRENT-LOSS; EQUIVALENT MAGNETIC CIRCUIT; FLYWHEEL SYSTEMS; FORCE-DISPLACEMENT; HIGH-SPEED; HYBRID MAGNETIC BEARING; LOW LOSS; MAGNETIC POLES; NOVEL STRUCTURES; PARAMETER DESIGNS; RADIAL LOADS; SPIN SPEED; TWO CHANNEL; WORKING PRINCIPLES;

ELECTRIC NETWORK ANALYSIS; EQUIVALENT CIRCUITS; FLYWHEELS; HYSTERESIS; MAGNETIC BEARINGS; MAGNETIC CIRCUITS; MAGNETIC FIELDS; MATHEMATICAL MODELS; WHEELS;

STRUCTURAL DESIGN;

EID: 82155181641     PISSN: 00189464     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMAG.2011.2160649     Document Type: Article

References (30)

1. F. Jiancheng, S. Jinji, L. Hu, and T. Jiqiang, "A novel 3-DOF axial hybrid magnetic bearing," IEEE Trans. Magn., vol. 46, no. 12, pp. 4034-4045, Dec. 2010.
2. A. V. Filatov and E. H. Maslen, "Passive magnetic bearing for flywheel energy storage systems," IEEE Trans. Magn., vol. 37, no. 6, pp. 3913-3924, Nov. 2001. (Pubitemid 34035705)
3. K. Asami, A. Chiba, M. A. Rahman, T. Hoshino, and A. Nakajima, "Stiffness analysis of a magnetically suspended bearingless motor with permanent magnet passive positioning," IEEE Trans. Magn., vol. 41, no. 10, pp. 3820-3822, Oct. 2005. (Pubitemid 41584579)
4. J. P. Lee, B. J. Park, Y. H. Han, S. Y. Jung, and T. H. Sung, "Energy loss by drag force of superconductor flywheel energy storage system with permanent magnet rotor," IEEE Trans. Magn., vol. 44, no. 11, pp. 4397-4440, Nov. 2008.
5. C. R. Morrison, M. W. Siebert, and E. J. Ho, "Electromagnetic forces in a hybrid magnetic-bearing switched-reluctance motor," IEEE Trans. Magn., vol. 44, no. 12, pp. 4626-4638, Dec. 2008.
6. M. N. Sahinkaya1 and A. E. Hartavi, "Variable bias current in magnetic bearings for energy optimization," IEEE Trans. Magn., vol. 43, no. 3, pp. 1052-1060, Mar. 2007. (Pubitemid 46389272)
7. M. H. Kimman, H. H. Langen, and R. H. Munnig Schmidt, "A miniature milling spindle with active magnetic bearings," Mechatronics, vol. 20, no. 2, pp. 224-235, Mar. 2010.
8. A. Pilat, "Analytical modeling of active magnetic bearing geometry," Appl. Math. Model., vol. 34, no. 12, pp. 3805-3816, Dec. 2010.
9. T. M. Lim, D. S. Zhang, J. J. Yang, S. B. Cheng, S. H. Low, and L. P. Chua et al., "Design and parameter estimation of hybrid magnetic bearings for blood pump applications," Mech. Syst. Signal Process., vol. 23, no. 7, pp. 2352-2382, Oct. 2009.
10. F. Jiancheng, S. Jinji, X. Yanliang, and W. Xi, "A new structure for permanent-magnet-biased axial hybrid magnetic bearings," IEEE Trans. Magn., vol. 45, no. 12, pp. 5319-5325, Dec. 2009.
11. T. Azukizawa, S. Yamamoto, and N. Matsuo, "Feasibility study of a passive magnetic bearing using the ring shaped permanent magnets," IEEE Trans. Magn., vol. 44, no. 11, pp. 4277-4280, Nov. 2008.
12. P. Samanta and H. Hirani, "Magnetic bearing configurations: Theoretical and experimental studies," IEEE Trans. Magn., vol. 44, no. 2, pp. 292-300, Feb. 2008.
13. R. Ravaud, G. Lemarquand, and V. Lemarquand, "Force and stiffness of passive magnetic bearings using permanent magnets. Part 1: Axial magnetization," IEEE Trans. Magn., vol. 45, no. 7, pp. 2996-3002, Jul. 2009.
14. R. Ravaud, G. Lemarquand, and V. Lemarquand, "Force and stiffness of passive magnetic bearings using permanent magnets. Part 2: Radial magnetization," IEEE Trans. Magn., vol. 45, no. 9,pp. 3334-3342, Sep. 2009.
15. S. Earnshaw, "On the nature of the molecular forces which regulate the constitution of the lumiferous ether," Trans. Camb. Phil. Soc., vol. 7, pp. 97-112, 1842.
16. M. A. Pichot and M. D. Driga, "Loss reduction strategies in design of magnetic bearing actuators for vehicle applications," IEEE Trans. Magn., vol. 41, no. 1, pp. 492-496, Jan. 2005. (Pubitemid 40136341)
17. K. Hijikata, S. Kobayashi, M. Takemoto, Y. Tanaka, A. Chiba, and T. Fukao, "Basic characteristics of an active thrust magnetic bearing with a cylindrical rotor core," IEEE Trans. Magn., vol. 44, no. 11, pp. 4167-4170, Nov. 2008.
18. K. Hijikata, M. Takemoto, S. Ogasawara, A. Chiba, and T. Fukao, "Behavior of a novel thrust magnetic bearing with a cylindrical rotor on high speed rotation," IEEE Trans. Magn., vol. 45, no. 10, pp. 4617-4620, Oct. 2009.
19. Z. Dehong, C. Xin, and Z. Huangqiu, "Structure and performance analysis for AC-DC three degrees of freedom active magnetic bearings," in Power Electronics and Motion Control Conf., May 2009, pp. 2005-2009.
20. W. Qinghai, P. Wei, and H. Yizhou, "Principle and parameter design for an innovated radial-axial hybrid magnetic bearing," in Int. Conf. Electrical Machines and Systems, 2008, pp. 2142-2146.
21. Y. Okada, H. Koyanayi, and K. Kakihara, "New concept of miracle magnetic bearings," in Proc. 9th Int. Symp. Magnetic Bearings, Lexington, KY, Aug. 2004, pp. 89-95.
22. F. Jiancheng and S. Jinji, "New permanent magnet biased radial magnetic bearing in magnetic suspending flywheel application," (in Chinese) J. Beijing Univ. Aeronaut. Astronaut., vol. 32, no. 11, pp. 1304-1307, Nov. 2006.
23. M. Reisinger, W. Amrhein, and S. Silber, "Development of a low cost permanent magnet biased bearing," in Proc. 9th Int. Symp. Magnetic Bearings, Lexington, KY, Aug. 2004, pp. 113-118.
24. W. Qinghai, Z. Huangqiu, Z. Dehong, and S. Yuxiang, "Configuration design and 3D-FEM analysis for a radial-axial hybrid magnetic bearing," in Proc. 11th Int. Symp. Magnetic Bearings, Nara, Japan, Aug. 2008, pp. 326-332.
25. M. Hofer, E. Schmidt, and M. Schrödl, "Design of a three phase permanent magnet biased radial active magnetic bearing regarding a position sensorless control," in 24th Annu. IEEE Applied Power Electronics Conf. and Expo., Washington, DC, Feb. 2009, pp. 1716-1721.
26. X. Yanliang, D. Yueqin, W. Xiuhe, and K. Yu, "Analysis of hybrid magnetic bearing with a permanent magnet in the rotor by FEM," IEEE Trans. Magn., vol. 42, no. 4, pp. 1363-1366, Apr. 2006.
27. S. Jinji and F. Jiancheng, "A novel structure of permanent magnet biased radial hybrid magnetic bearing," J. Magn. Magn. Mater., vol. 232, no. 2, pp. 202-208, Jan. 2011.
28. D. Honglin, Y. Yingxin, W. Kejun, and D. Guangren, "Analysis on approximate computation of gap reluctance in radial active magnetic bearings," (in Chinese) Chin. J. Mech. Eng., vol. 43, no. 8, pp. 43-47, Aug. 2007.
29. G. Schweitzer,A.Traxler, and H. Bleuler, Magnetlager(in German). Berlin, Germany: Springer-Verlag, 1993.
30. S. Yue and Y. Lie, "Design principle and parameter selection for electric-magnetic bearing and its control system," (in Chinese) Bearing, no. 9, pp. 13-14, 2001.