Experimental investigation on staggered impingement heat transfer on a rib roughened plate with different crossflow schemes

Proceedings of the ASME Turbo Expo

Volumn 4, Issue PARTS A AND B, 2010, Pages 1-11

  Xing, Yunfei ^a   Weigand, Bernhard ^a  

^a UNIVERSITY OF STUTTGART   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

AIR JET; CROSS FLOWS; EXPERIMENTAL INVESTIGATIONS; FLAT PLATE; HEAT TRANSFER PERFORMANCE; IMPINGEMENT HEAT TRANSFER; JET ARRAYS; JET DIAMETER; JET-TO-PLATE SPACING; MEASUREMENT UNCERTAINTY; REFERENCE TEMPERATURE; RIB TURBULATORS; TARGET PLATES; TRANSIENT LIQUID CRYSTAL METHOD;

HEAT TRANSFER COEFFICIENTS; LIQUID CRYSTALS; REYNOLDS NUMBER;

UNCERTAINTY ANALYSIS;

EID: 82055165506     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2010-22043     Document Type: Conference Paper

References (33)

1. Boyce, M. P., 2001, Gas turbine engineering handbook, 2nd ed., Gulf Publishing, USA.
2. Martin, H., 1977, "Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces," Adv. Heat Transfer, 13, pp. 1-60.
3. Han, B., and Goldstein, R. J., 2001, "Jet-Impingement Heat Transfer in Gas Turbine Systems," Ann. N. Y. Acad. Sci., 934, pp. 147-161. (Pubitemid 32612813)
4. Jambunathan, K., Lai, E., Moss, M., and Button, B., 1992, "A Review of Heat Transfer Data for Single Circular Jet Impingement," Int. J. Heat Fluid Flow, 13, pp. 106 - 115. (Pubitemid 23565182)
5. Viskanta, R., 1993, "Heat Transfer to Impinging Isothermal Gas and Flame Jets," Exp. Ther. Flui. Sci., 6, pp.111 - 134. (Pubitemid 23625774)
6. Weigand, B., and Spring, S., 2009, "Multiple Jet Impingement - A Review," International Symposium on Heat Transfer in Gas Turbine Systems, Antalya, Turkey.
7. Metzger, D. E., Florschuetz, L. W., Takeuchi, D. I., Behee, R. D., and Berry, R. A., 1979, "Heat Transfer Characteristics for Inline and Staggered Arrays of Circular Jets with Crossflow of Spent Air", ASME J. Heat Transfer, Vol.101, 526-531. (Pubitemid 10417863)
8. Florschuetz, L. W., Berry, R. A., and Metzger, D. E., 1980, "Periodic Streamwise Variations of Heat Transfer Coefficients for Inline and Staggered Arrays of Circular Jets with Crossflow of Spent Air", ASME J. Heat Transfer, Vol.102, 132-137. (Pubitemid 10464216)
9. Van Treuren, K. W., Wang, Z., Ireland, P. Jones, T. V., and Kohler, S. T., 1996,"Comparison and Prediction of Local and Average Heat Transfer Coefficients under an Array of Inline and Staggered Impinging Jet", ASME paper No. 96- GT-163.
10. Trabold, T. A., and Obot, N. T., 1987, "Impingement Heat Transfer within Arrays of Circular Jets: Part II - Effects of Crossflow in the Presence of Roughness Elements," ASME J. Turbomach., 109, pp.594-601.
11. Gau, C., and Lee, C. C., 1992, "Impingement Cooling Flow Structure and Heat Transfer along Rib-Roughened Walls," Int. J. Heat Mass Transfer, 35, pp. 3009-3020. (Pubitemid 23581428)
12. Hansen, L. G., and Webb, B. W., 1993, "Air Jet Impingement Heat Transfer from Modified Surfaces," Int. J. Heat Mass Transfer, 36, pp. 989-997. (Pubitemid 23622471)
13. Chang, H., Zhang, D., and Huang, T., 1997, "Impingement Heat Transfer from Rib Roughened Surface within Arrays of Circular Jet: The Effect of the Relative Position of the Jet Hole to the Ribs," ASME paper No. 97-GT-331.
14. Chang, H., Zhang, J., and Huang, T., 1998, "Experimental Investigation on Impingement Heat Transfer from Rib Roughened Surface within Arrays of Circular Jet," ASME paper No. 98-GT-208.
15. Chang, H., Zhang, J., and Huang, T., 2000, "Experimental Investigation on Impingement Heat Transfer from Rib Roughened Surface within Arrays of Circular Jets: Correlation," ASME paper No. 2000-GT-220.
16. Hoecker, R., Johnson, B. V., Hausladen, J., Rothbrust, M., and Weigand, B., 1999, "Impingement Cooling Experiments with Flat Plate and Pin Plate Target Surfaces," ASME paper No. 99-GT-252.
17. Annerfeldt, M. O., Persson, J. L., and Torisson, T., 2001, "Experimental Investigation of Impingement Cooling with Turbulators or Surface Enlarging Elements," ASME paper No. 2001-GT-0149.
18. Andrews, G. E., Abdul Hussain, R. A. A., and Mkpadi, M. C., 2003, "Enhanced Impingement Heat Transfer: Comparison of Co-flow and Cross-flow with Rib Turbulators," IGTC2003Tokyo TS-075, Proceedings of the International Gas Turbine Congress 2003 Tokyo.
19. Son, C., Dailey, G., Ireland, P., and Gillespie, D., "An Investigation of the Application of Roughness Elements to Enhance Heat Transfer in an Impingement Cooling System," ASME paper No. 2005- GT-68504.
20. Son, C., Ireland, P., and Gillespie, D., 2005, "The Effect of Roughness Element Fillet Radii on the Heat Transfer Enhancement in an Impingement Cooling System," ASME paper No. 2005- GT-68186.
21. Andrews, G. E., Abdul Hussain, R. A. A., and Mkpadi, M. C., 2006, "Enhanced Impingement Heat Transfer: The Influence of Impingement X/D for Interrupted Rib Obstacles (Rectangular Pin Fins)," ASME J. Turbomach., 128, pp. 312-331.
22. El-Gabry. L. A., and Kaninski, D. A., 2005, "Experimental Investigation of Local Heat Transfer Distribution on Smooth and Roughened Surfaces under an Array of Angled Impinging Jets," ASME J. Heat Transfer, 127, pp. 532-544. (Pubitemid 41167097)
23. Yan, W. M., Liu, H. C., Soong, C. Y., and Yang, W. J., 2005, "Experimental Study of Impinging Heat TTransfer along Rib-Roughened Walls by Using Transient Liquid Crystal Technique," Int. J. Heat Mass Transfer, 48, pp. 2420-2428. (Pubitemid 40599723)
24. Yan, W. M., and Mei, S. C., 2006, "Measurement of Detailed Heat Transfer along Rib-Roughened Surface under Arrays of Impinging Elliptic Jet," Int. J. Heat Mass Transfer, 49, pp.159-170. (Pubitemid 43205809)
25. Ireland, P. T., and Jones, T. V., 2000, "Liquid Crystal Measurements of Heat Transfer and Surface Shear Stress". Meas. Sci. Technol., 11, pp. 969-986. (Pubitemid 30480743)
26. Kays, W. M., Crawford, M. E., and Weigand, B., 2004. Convective Heat and Mass Transfer, McGraw-Hill International Editions, NY, USA.
27. Poser, R., von Wolfersdorf, J., and Lutum, E., 2007, "Advanced Evaluation of Transient Heat Transfer Experiments Using Thermochromic Liquid Crystals," Proc. Inst. Mech. Eng., Part A, 221(6), pp. 793-801. (Pubitemid 47603756)
28. Kline, S. J., and McClintock, F. A., 1953. "Describing uncertainties in single-sample experiments". J. Mech. Eng., 75, pp. 3-8.
29. Yan, Y., and Owen, J.M., 2002, "Uncertainties in Transient Heat Transfer Measurements with Liquid Crystal". Int. J. Heat Fluid Flow, 23, pp. 29-35. (Pubitemid 34170198)
30. Kingsley-Rowe, J.R., Lock, G.D., and Owen, J.M., 2005, "Transient Heat Transfer Measurements Using Thermochromic Liquid Crystal: Lateral-Conduction Error". Int. J. Heat Fluid Flow, 26, pp. 256-263. (Pubitemid 40262970)
31. Park, J., Goodro, M., Ligrani, P., Fox, M., Moon, H. K., 2007, "Separate Effects on Mach Number and Reynolds Number on Jet Array Impingement Heat Transfer," ASME J. Turbomach., 129, pp. 269-280. (Pubitemid 46864986)
32. Kercher, D. M., and Tabakoff, W., 1970, "Heat Transfer by a Square Array of Round Air Jets Impinging Perpendicular to a Flat Surface Including the Effect of Spent Air," J. Eng. Power, 92, pp. 73-82.
33. Annerfeldt, M. O., Persson, J. L., and Torisson, T., 2001, "Experimental Investigation of Impingement Cooling with Turbulators or Surface Enlarging Elements", ASME paper No. 2001-GT-0149.