Evaluation of flexural behavior and serviceability performance of concrete beams reinforced with FRP bars

Journal of Composites for Construction

Volumn 15, Issue 5, 2011, Pages 682-695

  Kassem, Chakib ^a   Farghaly, Ahmed Sabry ^b,c   Benmokrane, Brahim ^b  

^a Osmos Canada   (Canada)

^b UNIVERSITÉ DE SHERBROOKE   (Canada)

^c ASSIUT UNIVERSITY   (Egypt)

Author keywords

Beams; Concrete; Crack width; Deflection; Flexure; FRP bars; Reinforcement ratio; Strain

Indexed keywords

BEAMS; CRACK WIDTH; FLEXURE; FRP BAR; REINFORCEMENT RATIO;

CARBON FIBERS; CONCRETES; CRACKS; DEFLECTION (STRUCTURES); GLASS; REINFORCEMENT; STRAIN;

CONCRETE BEAMS AND GIRDERS;

EID: 81855197997     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CC.1943-5614.0000216     Document Type: Article

References (40)

1. Aly, R. S., Benmokrane, B., and Ebead, U. A. (2006). Tensile lap splicing of bundled CFRP reinforcing bars in concrete.. J. Compos. Constr. 1090-0268, 10 (4), 287-294. 10.1061/(ASCE)1090-0268(2006)10:4(287) (Pubitemid 44090915)
2. American Concrete Institute (ACI) Committee 318. (2008). Building code requirements for structural concrete and commentary.. ACI 318-08, Farmington Hills, MI
3. American Concrete Institute (ACI) Committee 440. (2003). Guide for the design and construction of concrete reinforced with FRP bars. ACI 440.1R-03, Farmington Hills, MI
4. American Concrete Institute (ACI) Committee 440. (2004). Guide test methods for fiber-reinforced polymers (FRPs) for reinforcing or strengthening concrete structures.. ACI 440.3R-04, Farmington Hills, MI
5. American Concrete Institute (ACI) Committee 440. (2006). Guide for the design and construction of concrete reinforced with FRP bars.. ACI 440.1R-06, Farmington Hills, MI
6. American Concrete Institute (ACI) Committee 440. (2007). Report on fiber-reinforced polymer (FRP) reinforcement concrete structures.. ACI 440R-07, Farmington Hills, MI
7. American Concrete Institute (ACI) Committee 440. (2008). Specification for carbon and glass fiber-reinforced polymer bar as materials for concrete reinforcement.. ACI 440.M-08, Farmington Hills, MI
8. Benmokrane, B., Chaallal, O., and Masmoudi, R. (1996). Flexural response of concrete beams reinforced with FRP reinforcing bars.. ACI Struct. J., 91 (2), 46-55. 0889-3241 (Pubitemid 126509775)
9. Bischoff, P. H. (2005). Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars.. J. Struct. Eng. 0733-9445, 131 (5), 752-767. 10.1061/(ASCE)0733-9445(2005)131: 5(752) (Pubitemid 40609967)
10. Bischoff, P. H., and Paixao, R. (2004). Tension stiffening and cracking of concrete reinforced with glass fiber-reinforced polymer (GFRP) bars.. Can. J. Civ. Eng. 0315-1468, 31 (4), 579-588. 10.1139/l04-025 (Pubitemid 39500605)
11. Bischoff, B. H., and Scanlon, A. (2007). Effective moment of inertia for calculating deflections of concrete members containing steel reinforcement and fiber-reinforced polymer reinforcement.. ACI Struct. J., 104 (1), 68-75. 0889-3241
12. Branson, D. E. (1968). Design procedures for computing deflections.. ACI Struct. J., 65 (8), 730-742. 0889-3241
13. Brown, V. L., and Bartholomew, C. L. (1996). Long-term deflection of GFRP-reinforced-concrete beams.. Fiber Composites in Infrastructure: Proc., 1st Int. Conf. on Composites in Infrastructures (ICCI96), H. Saadatmanesh, and, M. R. Ehsani, eds., Tucson, AZ, 389-400.
14. Canadian Standards Association (CSA). (2002). Design and construction of building components with fiber-reinforced polymers.. CSA S806-02, Mississauga, ON, Canada
15. Canadian Standards Association (CSA). (2004). Design of concrete structures standard.. CSA A23.3-04, Mississauga, ON, Canada
16. Canadian Standards Association (CSA). (2010 a). Canadian highway bridge design code.. CSA S6-10, Mississauga, ON, Canada
17. Canadian Standards Association (CSA). (2010 b). Specification for fibre reinforced polymers.. CSA S807-10, Mississauga, ON, Canada
18. El-Salakawy, E., and Benmokrane, B. (2004). Serviceability of concrete bridge deck slabs reinforced with fiber-reinforced polymer composite bars.. ACI Struct. J., 101 (5), 727-736. 0889-3241
19. Faza, S. S., and GangaRao, H. V. S. (1992). Pre- and post-cracking deflection behavior of concrete beams reinforced with fiber-reinforced plastic rebars.. Proc., 1st Int. Conf. on the Use of Advanced Composite Materials in Bridges and Structures (ACMBS-I), K. Neale, and, P. Labossiere, eds., Society for Civil Engineering, Montreal, Canada, 151-160.
20. Fdration Internationale du Bton (fib). (2007). FRP reinforcement in RC structures.. Task Group 9.3, Lausanne, Switzerland
21. Frosch, R. J. (1999). Another look at cracking and crack control in reinforced concrete.. ACI Struct. J., 96 (3), 437-442. 0889-3241
22. Gao, D., Benmokrane, B., and Masmoudi, R. (1998). A calculating method of flexural properties of FRP-reinforced concrete beam, Part 1: Crack width and deflection.. Tech. Report, Dept. of Civil Engineering, Univ. of Sherbrooke, Sherbrooke, QC, Canada.
23. Gergely, P., and Lutz, L. A. (1968). Maximum crack width in reinforced concrete flexural members.. Causes, mechanisms, and control of cracking in concrete, ACI SP-20, ACI, Farmington Hills, MI, 87-117.
24. Gulbrandsen, P. (2005). Reliability analysis of the flexural capacity of fiber-reinforced polymer bars in concrete beams.. Master's thesis, Univ. of Minnesota, Minneapolis-St. Paul, MN.
25. ISIS Canada. (2007). Reinforcing concrete structures with fiber-reinforced polymers-Design manual No. 3.. Manitoba, Canada
26. Italian National Research Council (CNR). (2006). Guide for the design and construction of concrete structures reinforced with fiber-reinforced polymer bars., CNR-DT 203/2006, Rome
27. Jaeger, L. G., Mufti, A. A., and Tadros, G. (1997). The concept of the overall performance factor in rectangular-section reinforced concrete members.. Proc., 3rd Int. Symp. on Nonmetallic (FRP) Reinforcement for Concrete Structures, Japan Concrete Institute, Tokyo, 551-559.
28. Lee, W. K., Jansen, D. C., Berlin, K. B., and Cohen, I. E. (2010). Flexural cracks in fiber-reinforced concrete beams with fiber-reinforced polymer reinforcing bars.. ACI Struct. J., 107 (3), 321-329. 0889-3241
29. Masmoudi, R., Thriault, M., and Benmokrane, B. (1998). Flexural behavior of concrete beams reinforced with deformed fiber reinforced plastic reinforcing rods.. ACI Struct. J., 95 (6), 665-676. 0889-3241 (Pubitemid 128549684)
30. Mota, C., Alminar, S., and Svecova, D. (2006). Critical review of deflection formulas for FRP-RC members.. J. Compos. Constr. 1090-0268, 10 (3), 183-194. 10.1061/(ASCE)1090-0268(2006)10:3(183) (Pubitemid 43970087)
31. Nanni, A. (1993). Flexural behavior and design of RC members using FRP reinforcement.. J. Struct. Eng. 0733-9445, 119 (11), 3344-3359. 10.1061/(ASCE)0733-9445(1993)119:11(3344)
32. Newhook, J., Ghali, A., and Tadros, G. (2002). Concrete flexural members reinforced with fiber-reinforced polymer: Dsign for cracking and deformability.. Can. J. Civil Eng., 29, 125-134. (Pubitemid 34961533)
33. Pecce, M., Manfredi, G., and Cosenza, E. (2000). Experimental response and code models of GFRP RC beams in bending.. J. Compos. Constr. 1090-0268, 4 (4), 182-190. 10.1061/(ASCE)1090-0268(2000)4:4(182)
34. Pilakoutas, K., Neocleous, K., and Guadagnini, M. (2002). Design philosophy issues of fiber-reinforced polymer reinforced concrete structures.. J. Compos. Constr. 1090-0268, 6 (3), 154-161. 10.1061/(ASCE)1090-0268(2002)6: 3(154) (Pubitemid 40253140)
35. Rashid, M. A., Mansur, M. A., and Paramasivam, P. (2005). Behavior of aramid fiber-reinforced polymer reinforced high strength concrete beams under bending.. J. Compos. Constr. 1090-0268, 9 (2), 117-127. 10.1061/(ASCE)1090- 0268(2005)9:2(117) (Pubitemid 40449641)
36. Razaqpur, A. G., Svecova, D., and Cheung, M. S. (2000). Rational method for calculating deflection of fiber-reinforced polymer reinforced beams.. ACI Struct. J., 97 (1), 175-184. 0889-3241
37. Thriault, M., and Benmokrane, B. (1998). Effects of FRP reinforcement ratio and concrete strength on flexural behavior of concrete beams.. J. Compos. Constr. 1090-0268, 2 (1), 7-16. 10.1061/(ASCE)1090-0268(1998)2:1(7)
38. Toutanji, H., and Deng, Y. (2003). Deflection and crack-width prediction of concrete beams reinforced with glass FRP rods.. Constr. Build. Mater. 0950-0618, 17 (1), 69-74. 10.1016/S0950-0618(02)00094-6 (Pubitemid 35433469)
39. Toutanji, H. A., and Saafi, M. (2000). Flexural behavior of concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars.. ACI Struct. J., 97 (5), 712-719. 0889-3241
40. Yost, J. R., Gross, S. P., and Dinehart, D. W. (2003). Effective moment of inertia for glass fiber-reinforced polymer-reinforced concrete beams.. ACI Struct. J., 100 (6), 732-739. 0889-3241