Construction engineering requirements for integrating laser scanning technology and building information modeling

Journal of Construction Engineering and Management

Volumn 137, Issue 10, 2011, Pages 797-805

  Randall, Tristan ^a  

^a PARSONS BRINCKERHOFF   (United States)

Author keywords

Building information modeling; Laser scanning; Model based design; Point clouds

Indexed keywords

ARCHITECTURE , ENGINEERING , AND CONSTRUCTIONS; BUILDING INFORMATION MODELING; CONSTRUCTION ENGINEERING; LASER SCANNING; LASER SCANNING TECHNOLOGY; MODEL-BASED DESIGN; POINT CLOUD; PROJECT LIFE CYCLE; SPATIAL DATA ACQUISITION; TECHNICAL REQUIREMENT; WORK-FLOWS;

ARCHITECTURAL DESIGN; INFORMATION THEORY; SCANNING; STRUCTURAL DESIGN; TECHNOLOGY; THREE DIMENSIONAL;

LASER APPLICATIONS;

EID: 81855196055     PISSN: 07339364     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CO.1943-7862.0000322     Document Type: Conference Paper

References (48)

1. Akinci, B., (2006). A formalism for utilization of sensor systems and integrated project models for active construction quality control. Autom. Constr., 15 (2), 124-138. 0926-5805 10.1016/j.autcon.2005.01.008 (Pubitemid 41817142)
2. Akinci, B., and Huber, D. (2009). Extending/augmenting current building information models with scanned data. NIST, Gaithersburg, MD
3. Autodesk (2012). Navisworks 2012 supported formats and applications. http://usa.autodesk.com/adsk/servlet/pc/item?id=10578958&siteID=123112 (Oct. 5, 2011).
4. Axelsson, P. (2000). DEM generation from laser scanner data using adaptive TIN models. Int. Arch. Photogramm. Remote Sens. 0887-3801 10.1061/(ASCE)0887-3801(2009)23:6(311)
5. Chen, J., and Chen, B. (2008). Architectural modeling from sparsely scanned range data. Int. J. Comput. Vis. 0920-5691, 78 (2-3), 223-236. 10.1007/s11263-007-0105-5
6. Collins, B., and Sitar, N. (2005). Monitoring of coastal bluff stability using high resolution 3D laser scanning. Proc., Sessions of the Geo-Frontiers 2005 Congress, ASCE, Reston, VA, 1-11.
7. Duffell, C., and Rudrum, D. (2005). Remote sensing techniques for highway earthworks assessment. Proc. Sessions of the Geo-Frontiers 2005 Congress, ASCE, Reston, VA, 1-13.
8. El-Omari, S., and Moselhi, O. (2008). Integrating 3D laser scanning and photogrammetry for progress measurement of construction work. Autom. Constr., 18 (1), 1-9. 0926-5805 10.1016/j.autcon.2008.05.006
9. Federal Highway Administration. (2010). Deficient bridges by state and highway system. U.S. DOT, http://www.fhwa.dot.gov/bridge/nbi/defbr09.cfm (Jun. 30, 2010).
10. Finno, R., and Hashash, Y. (2006). Integrating tools to predict, monitor and control deformation due to excavations. Proc., GeoCongress 2006, ASCE, Reston, VA, 1-6.
11. Fruh, C., and Zakhor, A. (2003). Constructing 3D city models by merging ground-based and airborne views. IEEE Computer Society Conf. on Computer Vision and Pattern Recognition, IEEE, New York, 1-10.
12. Fuchs, P., Washer, G., Chase, S., and Moore, M. (2004). Laser-based instrumentation for bridge load testing. J. Perform. Constr. Facil., 18 (4), 213-219. 0887-3828 10.1061/(ASCE)0887-3828(2004)18:4(213) (Pubitemid 40285523)
13. Gallaher, M., O'Conner, A., Dettbarn, J., Jr., and Gilday, L. (2004). Cost analysis of inadequate interoperability in the U.S. capital facilities industry. NIST, Gaithersburg, MD
14. Garrick, N., (2005). Effective visualization techniques for transportation projects., New England Transportation Consortium, Storrs, CT
15. Goedert, J., and Meadati, P. (2008). Integrating construction process documentation into building information modeling. J. Constr. Eng. Manage., 134 (7), 509-516. 0733-9364 10.1061/(ASCE)0733-9364(2008)134:7(509)
16. Gordon, C., (2003). Combining reality capture technologies for construction defect detection: A case study. EIA9: E-Activities and Intelligent Support in Design and the Built Environment, 9th EuropIA Int. Conf., 99-108.
17. Gordon, S., and Lichti, D. (2007). Modeling terrestrial laser scanner data for precise structural deformation measurement. J. Surv. Eng., 133 (2), 72-80. 0733-9453 10.1061/(ASCE)0733-9453(2007)133:2(72) (Pubitemid 46605626)
18. Hajian, H., and Becerik-Gerber, B. (2009). A research outlook for real-time project information management by integrating advanced field data acquisition systems and building information modeling. Computing in civil engineering, ASCE, Reston, VA, 83-94.
19. Hashash, Y., Liu, L., Su, Y., and Song, H. (2006). Use of new technologies for tracking excavation progress. Proc., GeoCongress 2006, ASCE, Reston, VA, 1-5.
20. Hinks, T., Carr, H., and Laefer, D. (2009). Flight optimization algorithms for aerial LiDAR capture for urban infrastructure model generation. J. Comput. Civ. Eng., 23 (6), 330-339. 0887-3801 10.1061/(ASCE)0887-3801(2009) 23:6(330)
21. Hiremagalur, J., (2007). Creating standards and specifications for the use of laser scanning in Caltrans projects., Advanced Highway Maintenance and Construction Technology Research Center at Univ. of California at Davis, Davis, CA
22. Hughes, K., and Louden, E. (2005). Bridging the gap: Using 3-D laser scanning in historic-building documentation. APT Bull. 0733-9364 10.1061/(ASCE)0733-9364(2005)131:3(377) (Pubitemid 40303946)
23. Kemeny, J., Norton, B., Handy, J., and Donovan, J. (2008). Three-dimensional digital imaging for the identification, evaluation and management of unstable highway slopes., Transportation Research Board, Washington, DC
24. Kiziltas, S., (2007). Technological assessment and process implications of field data capture technologies for construction and facility/infrastructure management. ITcon 0256-1840, XXXIV-3/W4.
25. Laefer, D., Carr, H., Morrish, S., and Kalkan, E. (2006). Opportunities and impediments to the use of three-dimensional laser scanning for adjacent excavations. Proc., GeoCongress 2006, ASCE, Reston, VA, 247-254.
26. Leica Geosystems. (2010). Leica ScanStation C10. http://www.leica- geosystems.com/en/Leica-ScanStation-C10-79411.htm (Oct. 4, 2010).
27. Lytle, A., Katz, I., and Saidi, K. (2005). Performance evaluation of a high-frame rate 3D range sensor for construction applications. Proc., 22nd Int. Symp. on Automation and Robotics in Construction (ISARC), ISARC, Ferrara, Italy, 1-6.
28. McGraw-Hill Construction. (2009). The business value of BIM-Getting building information modeling to the bottom line. The McGraw-Hill Companies, New York
29. Mills, J., and Barber, D. (2004). Geomatics techniques for structural surveying. J. Surv. Eng., 130 (2), 56-64. 0733-9453 10.1061/(ASCE)0733- 9453(2004)130:2(56) (Pubitemid 38587371)
30. Nam, C., and Tatum, C. (1992). Noncontractual methods of integration on construction projects. J. Constr. Eng. Manage., 118 (2), 385-98. 0733-9364 10.1061/(ASCE)0733-9364(1992)118:2(385)
31. National Institute of Building Sciences. (2007). United States national building information modeling standard. Washington, DC.
32. National Institute of Standards and Technology (NIST). (2006). Standard definitions of terminology for 3D imaging system. Proc., 3rd NIST Workshop on the Performance, Gaithersburg, MD, 1-13.
33. Olsen, M., Kuester, F., Chang, B., and Hutchison, T. (2010). Terrestrial laser scanning-based structural damage assessment. J. Comput. Civ. Eng., 24 (3), 264-272. 0887-3801 10.1061/(ASCE)CP.1943-5487.0000028
34. Priestnall, G., Jaafar, J., and Duncan, A. (2000). Extracting urban features from LiDAR digital surface models. Comput. Environ. Urban Syst. 1076-0431, 10 (3), 98-102. 10.1061/(ASCE)1076-0431(2004)10:3(98)
35. Shih, N., Wu, M., and Kunz, J. (2004). The inspections of as-built construction record by 3D point clouds. CIFE working paper #090, Stanford Univ. Center for Integrated Facility Engineering, Stanford, CA
36. Son, H., (2008). Real-time object recognition and modeling for heavy equipment operation. Proc., Int. Symp. on Automation and Robotics in Construction, Institute of Internet and Intelligent Technologies, Vilnius, Lithuania, 232-237.
37. Tang, P., and Akinci, B. (2009). Extracting surveying goals from point clouds to support construction and infrastructure inspection. Proc., Construction Research Congress, ASCE, 1164-1173.
38. Tang, P., Akinci, B., and Garrett, J. (2007). Laser scanning for bridge inspection and management. Proc., Int. Association for Bridge and Structural Engineering Symp., Weimar, Germany.
39. Tatum, C. (1984). What prompts construction innovation? J. Constr. Eng. Manage., 110 (3), 311-323. 0733-9364 10.1061/(ASCE)0733-9364(1984)110:3(311) (Pubitemid 14646481)
40. Teizer, J., Caldas, C., and Haas, C. (2007). Real-time three-dimensional occupancy grid modeling for the detection and tracking of construction resources. J. Constr. Eng. Manage., 133 (11), 880-888. 0733-9364 10.1061/(ASCE)0733-9364(2007)133:11(880) (Pubitemid 47587931)
41. Teizer, J., and Kahlmann, T. (2007). Range imaging as emerging optical three-dimension measurement technology. Transp. Res. Rec. 0361-1981, 2040 (-1), 19-29. 10.3141/2040-03 (Pubitemid 351532613)
42. Thayer, S., and Hallmark, M. (2009). New construction verification by measurement of ovality and deflection with 3-D LADAR. Pipelines 2009: Infrastructure's Hidden Assets, ASCE, Reston, VA, 1156-1161.
43. U.S. Dept. of Labor. (2010). Injuries, illnesses, and fatalities. Bureau of Labor Statistics, http://www.bls.gov/iif/oshcfoi1.htm (Jun. 29, 2010).
44. U.S. General Services Administration (GSA). (2009). GSA building information modeling guide series: 03-GSA BIM guide for 3D imaging., Washington, DC
45. Vosselman, G., and Dijkman, S. (2001). 3D building model reconstruction form point clouds and ground plans. Int. Arch. Photogramm. Remote Sens. 0020-0255.
46. Walters, R., (2008). Using scanning lasers to determine the thickness of concrete pavement. J. Constr. Eng. Manage., 134 (8), 583-591. 0733-9364 10.1061/(ASCE)0733-9364(2008)134:8(583)
47. Zhou, G., Song, C., Simmer, J., and Cheng, P. (2004). Urban 3D GIS from LiDAR and digital aerial images. Comput. Geosci. 0098-3004, 30 (4), 345-353. 10.1016/j.cageo.2003.08.012 (Pubitemid 38629779)
48. Zhu, Z., and Brilakis, I. (2009). Comparison of optical sensor-based spatial data collection techniques for civil infrastructure modeling. J. Comput. Civ. Eng. 0887-3801, 23 (3), 170-77. 10.1061/(ASCE)0887-3801(2009)23:3(170)