Heat transfer in separated flows on the pressure side of turbine blades

Numerical Heat Transfer; Part A: Applications

Volumn 60, Issue 8, 2011, Pages 666-684

  De La Calzada, P ^a,b   Valdes, M ^b   Burgos, M A ^c  

^a Industria de TurboPropulsores SA   (Spain)

^b UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

^c TECHNICAL UNIVERSITY OF CARTAGENA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

CFD CODES; CODE VALIDATION; EXPERIMENTAL DATA; LOCAL MINIMUMS; NUMERICAL CODE; NUMERICAL RESULTS; PRESSURE SIDE; SEPARATED FLOWS; SEPARATION BUBBLE; TURBINE BLADE; VELOCITY COMPONENTS;

CODES (SYMBOLS); HEATING; TURBINES;

TURBOMACHINE BLADES;

EID: 81255152537     PISSN: 10407782     EISSN: 15210634     Source Type: Journal    
DOI: 10.1080/10407782.2011.616849     Document Type: Article

References (28)

1. M. Tutar and U. Sönmez, The Computation Modeling of Transitional Flow through a Transonic Linear Turbine: Comparative Performance of Various Turbulence Models, Numer. Heat Transfer A, vol. 58, pp. 403-427, 2010.
2. V. K. Garg and A. A. Ameri, Comparison of Two-Equation Turbulence Models for Prediction of Heat Transfer on Film-Cooled Turbine Blades, Numer. Heat Transfer A, vol. 32, no. 4, pp. 347-371, 1997. (Pubitemid 127629643)
3. M. T. Schobeiri, B. Oztürk, M. Kegalj, and D. Bensing, On the Physics of Heat Transfer, and Aerodynamic Behavior of Separated Flow along a Highly Loaded Low Pressure Tur-bine Blade under Periodic Unsteady Wake Flow Varying of Turbulence Intensity, J. Heat Transfer, vol. 130, pp. 051703.1-051703.19, 2008.
4. J. C. Vogel and J. K. Eaton, Combined Heat Transfer and Fluid Dynamic Measurements Downstream of a Backward-Facing Step, J. Heat and Mass Transfer, vol. 107, pp. 922-929, 1985. (Pubitemid 15606694)
5. E. M. Sparrow, S. S. Kang, and W. Chuck, Relation Between the Points of Flow Reat-tachment and Maximum Heat Transfer for Regions of Flow Separation, Int. J. Heat Mass Transfer, vol. 30, no. 7, pp. 1237-1246, 1987.
6. H. Kazeminejad, M. Ghamari, and M. A. Yaghoubi, A Numerical Study of Convective Heat Transfer from a Blunt Plate at Low Reynolds Number, Int. J. Heat Mass Transfer, vol. 39, no. 1, pp. 125-133, 1996. (Pubitemid 126405868)
7. G. H. Rhee, and H. J. Sung, A Low-Reynolds Number, Four Equation, Heat Transfer Model for Turbulent Separated and Reattaching Flows, Int. J. Heat Fluid Flow, vol. 18, pp. 38-44, 1997. (Pubitemid 127407686)
8. G. H. Rhee and H. J. Sung, Enhancement of Heat Transfer in Turbulent Separated and Reattaching Flow by Local Forcing, Numer. Heat Transfer A, vol. 37, pp. 733-753, 2000.
9. F. Bassi, S. Rebay, M. Savini, S. Colantuoni, and G Santoriello, A Navier-Stokes Solver with Different Turbulence Models Applied to Film-Cooled Turbine Cascades, Heat Transfer and Cooling in Gas Turbines, Paper No. 41, AGARD-CP-527, 1993.
10. R. B. Rivir, J. P. Johnston, and J. K. Eaton, Heat Transfer on a Flat Surface under a Region ofTurbulent Separation, J. Turbomachinery, vol. 116, pp 57-62, 1997.
11. R. J. Bellows and R. E. Mayle, Heat Transfer Downstream of a Leading Edge Separation Bubble, J. Turbomachinery, vol. 108, pp. 131-136, 1986.
12. P. De La Calzada and A. Alonso, Numerical Investigation of Heat Transfer in Turbine Cascades with Separated Flows, J. Turbomachinery, vol. 125, no. 2, pp. 260-266, 2003. (Pubitemid 36669685)
13. E. Lutum and F. Cottier, Aerothermal Predictions on a a Highly Loaded Turbine Blade Including Effects of Flow Separation, Proc. European Turbomachinery Conference, vol. 2, pp. 1581-1591, Istambul, Turkey, 2011.
14. W. Merzkirch R. H. Page, and L. S. Fletcher, A Survey of Heat Transfer in Compressible Separated and Reattached Flows, AIAA J., vol. 26, no. 2, pp. 144-150, 1988. (Pubitemid 18617282)
15. F. Haselbach, and H. P. Schiffer, Aerothermal Investigations on Turbine Endwalls, and Blades (AITEB), Proc. ASME Turbo Expo 2004, paper no. GT2004-53078, Vienna, Austria, 2004.
16. A. Jameson, W. Schmidt, and E. Turkel, Numerical Solution of the Euler Equations by Finite Volume Method using Runge-Kutta Time Stepping Schemes, AIAA, Paper 81-1259, 1981.
17. R. Corral and J. Fernandez-Castaneda, Surface Mesh Generation by Means of Steiner Triangulation, Proc. 29th AIAA FluidDynamics Conference, vol. 39, pp. 176-180, Albu-querque, New Mexico, 1998.
18. D. C. Wilcox, Reassessment of the Scale Determining Equation for Advanced Turbulence Models, AIAA J., vol. 26, pp. 1299-1310, 1988.
19. R. Corral and J. Contreras, Quantitative Influence of the Steady Non-Reflecting Bound-ary Conditions on Blade-to-Blade Computations, Proc. 45th ASME Gas Turbine and Aeroengine Congress, Exposition and Users Symposium, ASME Paper 2000-GT-515, Munich, 2000.
20. T. Arts and M. Lambert de Rouvroit, Aero-Thermal Performance of a Two Dimensional Highly Loaded Transonic Turbine Nozzle Guide Vane: A Test Case for Inviscid and Viscous Flow Computation, J. Turbomachinery, vol. 114, pp. 147-154, 1992.
21. A. Gehrer and H. Jericha, External Heat Transfer Predictions in a Highly Loaded Transonic Linear Turbine Guide Vane Cascade using and Upwind Biased Navier-Stokes Solver, J. Turbomachinery, vol. 121, pp. 525-531, 1999. (Pubitemid 29497168)
22. R. J. Boyle and A. A. Ameri, Grid Orthogonality Effects on Predicted Turbine Midspan Heat Transfer and Performance, J. Turbomachinery, vol. 119, pp. 31-38, 1997.
23. H. Hoheisel, Test Case E/CA-6, Subsonic Turbine Cascade T106, Test Cases for Computation of Internal Flows in Aero Engine Components, AGARD-AR-275, 1990.
24. E. J. Hall and J. D. Pletcher, Application of a Viscous-Inviscid Procedure to Predict Separated Flows with Heat Transfer, J. Heat Transfer, vol. 107, pp. 557-563, 1985. (Pubitemid 15548647)
25. P. R. Spalart and G N. Coleman, Numerical Study of a Separation Bubble with Heat Transfer, Euro. J. Mech., B/Fluids, vol. 16, no. 2, pp. 169-189, 1997.
26. F. M. White, Viscous Fluid Flow, McGraw-Hill, pp. 162 and 248, 1991.
27. H. W. Kim and D. R. Jeng, Convective Heat Transfer in Laminar Boundary Layer Near the Separation Point, ASME Proc. of the 1988 National Heat Transfer Conference, vol. 3, pp. 471-476, 1988.
28. K. S. Hwang, H. J. Sung, and J. M. Hyun, Flow and Mass Transfer Measurements for a Flat Plate of Finite Thickness in Pulsating Flow, Int. J. Heat and Mass Transfer, vol. 41, pp. 2827-2836, 1998. (Pubitemid 28393244)