On the physics of heat transfer and aerodynamic behavior of separated flow along a highly loaded low pressure turbine blade under periodic unsteady wake flow and varying of turbulence intensity

Journal of Heat Transfer

Volumn 130, Issue 5, 2008, Pages

  Schobeiri, M T ^a   Ozturk B ^a   Kegalj, M ^b   Besing, D ^c  

^a TEXAS A AND M UNIVERSITY   (United States)

^b DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

^c RUHR UNIVERSITY BOCHUM   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

AERODYNAMICS; NAVIER STOKES EQUATIONS; REYNOLDS NUMBER; TURBOMACHINE BLADES; TURBULENT FLOW; UNSTEADY FLOW; WAKES;

TURBINE BLADE; TURBULENCE INTENSITY; UNSTEADY WAKE FLOW;

HEAT TRANSFER;

AERODYNAMICS; HEAT TRANSFER; NAVIER STOKES EQUATIONS; REYNOLDS NUMBER; TURBOMACHINE BLADES; TURBULENT FLOW; UNSTEADY FLOW; WAKES;

EID: 44349191559     PISSN: 00221481     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2885156     Document Type: Article

References (36)

1. Schobeiri, M. T., Öztürk, B., and Ashpis, D., 2005, "On the Physics of the Flow Separation Along a Low Pressure Turbine Blade Under Unsteady Flow Conditions," ASME Trans. J. Fluids Eng., 127, pp. 503-513.
2. Schobeiri, M. T., and Öztürk, B., 2004, "Experimental Study of the Effect of the Periodic Unsteady Wake Flow on Boundary Layer Development, Separation, and Re-attachment Along the Surface of a Low Pressure Turbine Blade," ASME J. Turbomach., 126(9), pp. 663-676. 2004
3. Schobeiri, M. T., Öztürk, B., and Ashpis, D., 2005, "Effect of Reynolds Number and Periodic Unsteady Wake Flow Condition on Boundary Layer Development, Separation, and Re-attachment Along the Suction Surface of a Low Pressure Turbine Blade," ASME Paper No. GT2005-68600.
4. Schobeiri, M. T., Öztürk, B., and Ashpis, D., 2005, "Intermittent Behavior of the Separated Boundary Layer Along the Suction Surface of a Low Pressure Turbine Blade Under Periodic Unsteady Flow Conditions," ASME Paper No. GT2005-68603.
5. Öztürk, B., and Schobeiri, M. T., 2006, "Effect of Turbulence Intensity and Periodic Unsteady Wake Flow Condition on Boundary Layer Development. Separation, and Re-attachment Over the Separation Bubble Along the Suction Surface of a Low Pressure Turbine Blade," ASME Paper No. GT2006-91293.
6. Kaszeta, R. W., and Simon, T. W., 2002, "Experimental Investigation of Transition to Turbulence as Affected by Passing Wakes," NASA/CR Paper No. 2002-212104.
7. Wolf, W., Homeyer, Lars., and Fottner, L., 2001, "Experimental Investigation of Heat Transfer in Separated Flow on a Highly Loaded Lp-Turbine Cascade," Proceeding of the RTO/AVT Symposium and Specialists Meeting Heat Transfer and Cooling in Propulsion and Power Systems, Loen, Norway, May 7-11.
8. de la Calzada, P., and Alonso, A., 2005, "Numerical Investigation of Heat Transfer in Turbine Cascades With Separated Flows," ASME Paper No. GT-2002.
9. Han, J-C., "Gas Turbine Heat Transfer Laboratory," private communication.
10. Ameri, A., NASA Glenn Research Center, private communication.
11. Schobeiri, M. T., and Chakka, P., 2002, "Prediction of Turbine Blade Heat Transfer and Aerodynamics Using Unsteady Boundary Layer Transition Model," Int. J. Heat Mass Transfer, 45, pp. 815-829.
12. Han, J.-C., Zhang, L., and Ou, S., 1993, "Influence of Unsteady Wake on Heat Transfer Coefficient From a Gas Turbine Blade," ASME J. Heat Transfer, 115, pp. 904-911.
13. Dullenkopf, K., and Mayle, R. E., 1994, "The Effect of Incident Turbulence and Moving Wakes on Laminar Heat Transfer in Gas Turbines," ASME J. Turbomach., 116, pp. 23-28.
14. Magari, P. J., and LaGraff, L. E., 1994. "Wake-Induced Unsteady Stagnation-Region Heat Transfer Measurements," ASME J. Turbomach., 116, pp. 29-38,
15. Goldstein, R. J., 1971, Film Cooling (Advances in Heat Transfer) T. F. Irvin and J. P. Hartnett, eds., Academic, New York, Vol. 7, pp. 321-379.
16. Han, J. C., Dutta, S., and Ekkad, S. V., 2000, Gas Turbine Heat Transfer and Cooling Technology, Taylor & Francis, London.
17. Choi, J., Teng, S., Han, J.-C., and Ladeinde, F., 2004, "Effect of Free-Stream Turbulence on Blade Heat Transfer and Pressure Coefficients in Low Reynold Number Flow," Int. J. Heat Mass Transfer, 47, pp. 3441-3452.
18. Schobeiri, M. T., John, J., and Pappu, K., 1996, "Development of Two-Dimensional Wakes Within Curved Channels. Theoretical Framework and Experimental Investigation," ASME J. Turbomach., 118, pp. 506-518.
19. Schobeiri, M. T., and Özturk, B., 2004, "Turbulence Development and Decay Upstream of the LPT-Cascade," NASA GRC LPT-Project Progress Report No. 2004-2; NASA GRC Report No. 32525-61640 ME.
20. Bruun, H. H., 1995. Hot-Wire Anemometry, Oxford University Press, Oxford.
21. Barrett, M. J., and Hollingsworth, D. K., 2001, "On the Calculation of Length, Scales for Turbulent Heat Transfer Correlation," J. Heat Transfer, 123, pp. 232-241.
22. Hinze, J. O., 1975, Turbulence, 2nd ed., McGraw-Hill, New York.
23. Wright, L., and Schobeiri, M. T., 1999, "The Effect of Periodic Unsteady Flow on Boundary Layer and Heat Transfer on a Curved Surface," ASME Trans. J. Heat Transfer, 120, pp. 22-33.
24. Kline, S. J., and McKlintock. F. A., 1953, "Describing Uncertainties in Single-Sample Experiments," Mech. Eng. (Am. Soc. Mech. Eng.), 75, pp. 3-8.
25. Hourmouziadis, J., 1989, Blading Design for Axial Turbomachines (Lecture Series LS-167), AGARD.
26. Eifler, J., 1975, "Zur Frage der Freien Turbulenten Strömungen, Insbesondere Hinter Ruhenden und Bewegten Zylindern," dissertation, Technische Hochschule Darmstadt, Germany.
27. Boos, J. P., Sondergaard, R., and Rivir, R. B., 2001. "The Fluid Dynamics of LPT Blade Separation Control Using Pulsed Jets," ASME Paper No. 2001-GT-190.
28. Roberts, S. K., and Yaras, M. I., 2003, "Effects of Periodic-Unsteadiness, Free-Stream Turbulence and Flow Reynolds Number on Separation-Bubble Transition," ASME Paper No. GT-2003-38262.
29. Herbst, R., 1980, "Entwicklung von Strömungsgrenzschichten bei Instationärer Zuströmung in Turbomaschinen." dissertation, Technische Hochschule Darmstadt, Germany.
30. Pfeil, H., Herbst, R., and Schröder, T., 1983, "Investigation of the Laminar-Turbulent Transition of Boundary Layers Disturbed by Wakes," ASME J. Eng. Power, 105, pp. 130-137.
31. Schobeiri, M. T., and Radke, R., 1994. "Effects of Periodic Unsteady Wake Flow and Pressure Gradient on Boundary Layer Transition Along the Concave Surface of A Curved Plate," ASME Paper No. 94-GT-327.
32. Halstead, D. E., Wisler, D. C., Okiishi, T. H., Walker, G. J., Hodson. H. P., and Shin, H.-W., 1997, "Boundary Layer Development in Axial Compressors and Turbines: Part 3 of 4," ASME J. Turbomach., 119, pp. 225-237.
33. Giel, P. W., Van Fossen, G. J., Boyle, R. J., Thurman, D. R., and Civinskas, K. C., 1999, "Blade Heat Transfer Measurements and Predictions in a Transonic Turbine Cascade," ASME Paper No. 99-GT-125.
34. Giel, P. W., Bunker, R. S., Van Fossen, G. J., and Boyle, R. J., 2000. "Heat Transfer Measurements and Predictions on a Power Generation Gas Turbine Blade," ASME Paper No. 2000-GT-0209.
35. Arts, T., Lambert de Rouvroit, M., and Rutherford, A. W., 1990, "Aero-Thermal Investigation of a Highly Loaded Transonic Linear Turbine Guide Vane Cascade," VKI Technical Note 174.
36. Boyle, R. J., Ames, F., and Giel, P., 2004, Predictions for the Effects of Freestream Turbulence on Turbine Blade Heat Transfer," ASME Paper No. GT2004-54332.