Bone marrow modified acrylic bone cement for augmentation of osteoporotic cancellous bone

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 4, Issue 8, 2011, Pages 2081-2089

  Arens, Daniel ^a   Rothstock, Stephan ^a   Windolf, Markus ^a   Boger, Andreas ^b  

^a AO RESEARCH INSTITUTE   (Switzerland)

^b Synthes GmbH   (Switzerland)

Author keywords

Bone marrow; Low modulus; PMMA; Polymerization temperature; Porosity; Viscosity

Indexed keywords

ACRYLIC BONE CEMENTS; BONE MARROW; CANCELLOUS BONE; LOW MODULUS; OSTEOPOROTIC; PMMA; PMMA BONE CEMENT; POLYMERIZATION TEMPERATURE; PREMIXED; SETTING TIME; VERTEBRAL BODY; VERTEBROPLASTY; YOUNG'S MODULUS;

BLENDING; BONE; CEMENTS; ELASTIC MODULI; ELASTICITY; POLYMERIZATION; POLYMERS; POROSITY; SETTING; STRENGTH OF MATERIALS; VISCOMETERS; VISCOSITY; YIELD STRESS;

BONE CEMENT;

ACRYLIC CEMENT; POLY(METHYL METHACRYLATE);

ANIMAL TISSUE; ARTICLE; BONE MARROW; BONE STRENGTH; CANCELLOUS BONE; CONTROLLED STUDY; FEMALE; NONHUMAN; OSTEOPOROSIS; POLYMERIZATION; POROSITY; PRIORITY JOURNAL; SHEEP; SURGICAL TECHNIQUE; TEMPERATURE; VISCOSITY; YOUNG MODULUS;

ANIMALS; BIOCOMPATIBLE MATERIALS; BONE AND BONES; BONE MARROW; COMPLIANCE; FEMALE; OSTEOPOROSIS; POLYMERIZATION; POLYMETHYL METHACRYLATE; POROSITY; SHEEP; TEMPERATURE; TIME FACTORS; VERTEBROPLASTY; VISCOSITY;

EID: 81255136153     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2011.07.007     Document Type: Article

References (52)

1. Ahn D.K., Lee S., Choi D.J., Park S.Y., Woo D.G., Kim C.H., Kim H.S. Mechanical properties of blood-mixed polymethylmetacrylate in percutaneous vertebroplasty. Asian Spine J. 2009, 3(2):45-52.
2. Banse X., Sims T.J., Bailey A.J. Mechanical properties of adult vertebral cancellous bone: correlation with collagen intermolecular cross-links. J. Bone Miner. Res. 2002, 17:1621-1628.
3. Baroud G., Crookshank M., Bohner M. High-viscosity cement significantly enhances uniformity of cement filling in vertebroplasty: an experimental model and study on cement leakage. Spine 2006, 31:2562-2568.
4. Becker S., Maissen O., Ponomarev I., Stoll T., Rahn B., Wilke I. Osteopromotion by a beta-tricalcium phosphate/bone marrow hybrid implant for use in spine surgery. Spine 2006, 31:11-17.
5. Belkoff S.M., Molloy S. Temperature measurement during polymerization of polymethyl-methacrylate cement used for vertebroplasty. Spine 2003, 28:1555-1559.
6. Benneker L.M., Heini P.F., Suhm N., Gisep A. The effect of pulsed jet lavage in vertebroplasty on injection forces of polymethylmethacrylate bone cement, material distribution, and potential fat embolism: a cadaver study. Spine 2008, 33:906-910.
7. Benneker L.M., Krebs J., Boner V., Boger A., Hoerstrup S., Heini P.F., Gisep A. Cardiovascular changes after PMMA vertebroplasty in sheep: the effect of bone marrow removal using pulsed jet-lavage. Eur. Spine J. Epub. 2010.
8. Berlemann U., Ferguson S.J., Nolte L.P., Heini P.F. Adjacent vertebral failure after vertebroplasty. A biomechanical investigation. J. Bone Joint Surg. 2002, 84:748-752.
9. Boger A., Bohner M., Heini P.F., Verrier S., Schneider E. Properties of an injectable low modulus PMMA bone cement for osteoporotic bone. J. Biomed. Mater. Res. Part B Appl. Biomater. 2008, 86:474-482.
10. Boger A., Bisig A., Bohner M., Heini P.F., Schneider E. Variation of the mechanical properties of PMMA to suit osteoporotic cancellous bone. J. Biomater. Sci. Polym. Ed. 2008, 19:1125-1142.
11. Boger A., Heini P.F., Windolf M., Schneider E. Adjacent vertebral failure after vertebroplasty: a biomechanical study of low-modulus PMMA cement. Eur. Spine J. 2007, 16:2118-2125.
12. Boger A., Wheeler K.D. A medium viscous acrylic cement enhances uniformity of cement filling and reduces leakage in cancellous bone augmentation. ISRN Mater. Sci. 2010, Online available under: http://www.hindawi.com/isrn/ms/2011/780510/.
13. Boger A., Wheeler K., Montali A., Gruskin E. NMP-modified PMMA bone cement with adapted mechanical and hardening properties for the use in cancellous bone augmentation. J. Biomed. Mater. Res. B Appl. Biomater. 2009, 90:760-766.
14. Boger A., Wheeler K.D., Schenk B., Heini P.F. Clinical investigations of polymethylmethacrylate cement viscosity during vertebroplasty and related in vitro measurements. Eur. Spine J. 2009, 18:1272-1278.
15. Dahl O.E., Garvik L.J., Lyberg T. Toxic effects of methylmethacrylate monomer on leukocytes and endothelial cells in vitro. Acta Orthop. Scand. 1995, 65:147-153.
16. Deramond H., Wrigth N.T., Belkoff S.M. Temperature elevation caused by bone cement polymerization during vertebroplasty. Bone 1999, 25:17-21.
17. De Wijn J.R. Poly(methyl methacrylate)-aqueous phase blends: in situ curing porous materials. J. Biomed. Mater. Res. 1976, 10:625-635.
18. D'Ippolito G., Schiller P.C., Ricordi C., Roos B.A., Howard G.A. Age-related osteogenic potential of mesenchymal stromal stem cells from human vertebral bone marrow. J. Bone Miner. Res. 1999, 14:1115-1122.
19. Eriksson A.R., Albrektsson T. Temperature threshold levels for heat-induced bone tissue injury: a vital-microscopic study in the rabbit. J. Prosthet. Dent. 1983, 50:101-107.
20. Frankel B.M., Monroe T., Wang C. Percutaneous vertebral augmentation: an elevation in adjacent-level fracture risk in kyphoplasty as compared with vertebroplasty. Spine 2007, 7:575-582.
21. Grados F., Depriester C., Cayrolle G., Hardy N., Deramond H., Fardellone P. Long-term observations of vertebral osteoporotic fractures treated by percutaneous vertebroplasty. Rheumatology 2000, 39:1410-1414.
22. Griffith J.F., Yeung D.K., Antonio G.E., Lee F.K., Hong A.W., Wong S.Y., Lau E.M., Leung P.C. Vertebral bone mineral density, marrow perfusion, and fat content in healthy men and men with osteoporosis: dynamic contrast-enhanced MR imaging and MR spectroscopy. Radiology 2005, 236:945-951.
23. Griffith J.F., Yeung D.K., Antonio G.E., Wong S.Y., Kwok T.C., Woo J., Leung P.C. Vertebral marrow fat content and diffusion and perfusion indexes in women with varying bone density: MR evaluation. Radiology 2006, 241:831-838.
24. Heini P.F., Berlemann U., Kaufmann M., Lippuner K., Frankhauser C., van Landuyt P. Augmentation of mechanical properties in osteoprortic vertebral bones: a biomechanical investigation of vertebroplasty efficacy with different bone cements. Eur. Spine J. 2001, 10:164-171.
25. Heini P.F., Walchli B., Berlemann U. Percutaneous transpedicular vertebroplasty with PMMA: operative technique and early results. A prospective study for the treatment of osteoporotic compression fractures. Eur. Spine J. 2000, 9:445-450.
26. Hernandez L., Gurruchaga M., Goni I. Injectable acrylic bone cements for vertebroplasty based on a radiopaque hydroxyapatite. Formulation and rheological behaviour. J. Mater. Sci. Mater. Med. 2009, 20:89-97.
27. Hildebrand T., Ruegsegger P. A new method for the model independent assessment of thickness in three-dimensional images. J. Microsc. 1997, 185:67-75.
28. Kühn K.D. Bone Cements. Up-to-Date Comparison of Physical and Chemical Properties of Commercial Materials 2000, vol. 1. Springer, Berlin, Heidelberg, New York.
29. Laib A., Barou O., Vico L., Lafage-Proust M.H., Alexandre C., Rügsegger P. 3D micro-computed tomography of trabecular and cortical bone architecture with application to a rat model of immobilisation osteoporosis. Med. Biol. Eng. Comput. 2000, 38:326-332.
30. Lewis G. Properties of acrylic bone cement: state-of-the-art review. J. Biomed. Mater. Res. 1997, 38:155-182.
31. Li S., Chien S., Branemark P.I. Heat shock-induced necrosis and apoptosis in osteoblasts. J. Orthop. Res. 1999, 17:891-899.
32. Lundskog J. Heat and bone tissue. An experimental investigation of the thermal properties of bone and threshold levels for thermal injury. Scand. J. Plast. Reconstr. Surg. 1972, 9:1-80.
33. Mathis J.M., Deramond H., Belkoff S.M. Percutaneous Vertebroplasty 2002, Springer, Berlin, Heidelberg, New York. first ed.
34. McLain R.F., Boehm C.A., Rufo-Smith C., Muschler G.F. Transpedicular aspiration of osteoprogenitor cells from the vertebral body: progenitor cell concentrations affected by serial aspiration. Spine 2009, 9:995-1002.
35. McLain R.F., Fleming J.E., Boehm C.A., Muschler G.F. Aspiration of osteoprogenitor cells for augmenting spinal fusion: comparison of progenitor cell concentrations from the vertebral body and iliac crest. J. Bone Joint Surg. Am. 2005, 87:2655-2661.
36. Mousa W.F., Kobayashi M., Kitamura Y., Zeineldin I.A., Nakamura T. Effect of silane treatment and different resin compositions on biological properties of bioactive bone cement containing apatite-wollastonite glass ceramic powder. J. Biomed. Mater. Res. 1999, 47:336-344.
37. Pérez-Higueras A., Alvarez L., Rossi R.E., Quinones D., Al-Assir I. Percutaneous vertebroplasty: long-term clinical and radiological outcome. Neuroradiology 2002, 44:950-954.
38. Polikeit A., Nolte L.P., Ferguson S.J. The effect of cement augmentation on the load transfer in an osteoporotic functional spinal unit: finite-element analysis. Spine 2003, 28:991-996.
39. Puska M.A., Kokkari A.K., Närhi T.O., Vallittu P.K. Mechanical properties of oligomer-modified acrylic bone cement. Biomaterials 2003, 24:417-425.
40. Puska M.A., Närhi T.O., Aho A.J., Yli-Urpo A., Vallittu P.K. Flexural properties of crosslinked and oligomer-modified glass-fibre reinforced acrylic bone cement. J. Mater. Sci. Mater. Med. 2004, 15:1037-1043.
41. Risbud M.V., Shapiro I.M., Guttapalli A., Di Martino A., Danielson K.G., Beiner J.M., Hillibrand A., Albert T.J., Anderson D.G., Vaccaro A.R. Osteogenic potential of adult human stem cells of the lumbar vertebral body and the iliac crest. Spine 2006, 31:83-89.
42. Rohlmann A., Zander T., Bergmann G. Spinal loads after osteoporotic vertebral fractures treated by vertebroplasty or kyphoplasty. Eur. Spine J. 2006, 15:1255-1264.
43. Rohlmann A., Zander T., Jony, Weber U., Bergmann G. Effect of vertebral body stiffness before and after vertebroplasty on intradiscal pressure. Biomed. Tech. 2005, 50:148-152.
44. Serbetci K., Korkusuz F., Hasirci N. Thermal and mechanical properties of hydroxyapatite impregnated acrylic bone cements. Polym. Test. 2004, 23:145-155.
45. Stoll T., Maissen O., Meury T., Becker S. New aspects in osteoinduction. Mat. Sci. Eng. Tech. 2004, 35:198-202.
46. Sun, K., Liebschner, M.A.K., 2003. Optimization of bone cement properties in vertebral reinforcement. In: 13th Interdisciplinary Research Conference on Biomaterials GRIBOI.
47. Synthes Homepage: http://www.synthes.com/html/chronOS-Perfusion-Concept.7254.0.html?&L%3Dagyjdyxpilzt.
48. Uppin A.A., Hirsch J.A., Centenera L.V., Pfiefer B.A., Pazianos A.G., Choi I.S. Occurrence of new vertebral body fracture after percutaneous vertebroplasty in patients with osteoporosis. Radiology 2003, 226:119-124.
49. Urrutia J., Bono C.M., Mery P., Rojas C. Early histologic changes following polymethylmethacrylate injection (vertebroplasty) in rabbit lumbar vertebrae. Spine 2008, 33:877-882.
50. Van Lenthe G.H., Hagenmüller H., Bohner M., Hollister S.J., Meinel L., Müller R. Nondestructive micro-computed tomography for biological imaging and quantification of scaffold-bone interaction in vivo. Biomaterials 2007, 28:2479-2490.
51. Wintermantel E. Injectable open porous biomaterial for interbody fusion in spine surgery. VDF Hochschulverlag AG, ETH Zürich 1998, vol. 1:47-53. M.O. Speidel, P.J. Uggowitzer (Eds.).
52. Yamamuro T., Nakamura T., Iida H., Kawanabe K., Matsuda Y., Ido K., Tamura J., Senaha Y. Development of bioactive bone cement and its clinical applications. Biomaterials 1998, 19:1479-1482.