NMP-modified PMMA bone cement with adapted mechanical and hardening properties for the use in cancellous bone augmentation

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 90 B, Issue 2, 2009, Pages 760-766

  Boger, Andreas ^a   Wheeler, Kurtis ^a   Montali, Andrea ^a   Gruskin, Elliot ^b  

^a Synthes GmbH   (Switzerland)

^b Synthes Technical Center   (United States)

Author keywords

NMP; PMMA bone cement; Polymerization temperature; Stiffness adaptation; Viscosity

Indexed keywords

BONE; CEMENTS; ELASTIC MODULI; ELASTICITY; HARDENING; MECHANICAL PROPERTIES; POLYMERIZATION; POLYMERS; STIFFNESS; VISCOSITY; YIELD STRESS;

CANCELLOUS BONE; HANDLING TIME; HARDENING BEHAVIOR; HARDENING PROPERTIES; MATERIAL COMPOSITIONS; NMP; OSTEOPOROTIC; PMMA BONE CEMENT; POLYMERIZATION TEMPERATURE; ROOM TEMPERATURE; SETTING TIME; STORAGE CONDITION; VERTEBRAL BODY; VERTEBROPLASTY; YIELD STRENGTH; YOUNG'S MODULUS;

BONE CEMENT;

1 METHYL 2 PYRROLIDINONE; BONE CEMENT; PHOSPHATE BUFFERED SALINE; POLY(METHYL METHACRYLATE);

AIR TEMPERATURE; ARTICLE; CANCELLOUS BONE; CHEMICAL COMPOSITION; CHEMICAL PARAMETERS; POLYMERIZATION; RIGIDITY; ROOM TEMPERATURE; STORAGE; STRENGTH; YOUNG MODULUS;

EID: 67749122657     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31345     Document Type: Article

References (21)

1. Heini PF, Walchli B, Berlemann U. Percutaneous transpedicular vertebroplasty with PMMA: Operative technique and early results. A prospective study for the treatment of osteoporotic compression fractures. Eur Spine J 2000;9:445-450.
2. Lad SP, Patil CG, Lad EM, Boakye M. Trends in pathological vertebral fractures in the United States: 1993 to 2004. J Neurosurg Spine 2007;7:305-310.
3. Mathis JM, Deramond H, Belkoff SM. Percutaneous Vertebroplasty, 1st ed. New York, Berlin, Heidelberg: Springer; 2002. ISBN 0-387-95306-X.
4. Kühn KD. Bone Cements. Up-to-Date Comparison of Physical and Chemical Properties of Commercial Materials, Vol.1. Berlin, Heidelberg, New York: Springer; 2000.
5. Banse X, Sims TJ, Bailey AJ. Mechanical properties of adult vertebral cancellous bone: Correlation with collagen intermolecular cross-links. J Bone Miner Res 2002;17:1621-1628. (Pubitemid 34940677)
6. Heini PF, Berlemann U, Kaufmann M, Lippuner K, Frankhauser C, van Landuyt P. Augmentation of mechanical properties in osteoprortic vertebral bones-A biomechanical investigation of vertebroplasty efficacy with different bone cements. Eur Spine J 2001;10:164-171. (Pubitemid 32337046)
7. Boger A, Heini P, Windolf M, Schneider E. Adjacent vertebral failure after vertebroplasty: A biomechanical study of low-modulus PMMA cement. Eur Spine J 2007;16:2118-2125. (Pubitemid 350276084)
8. Polikeit A, Nolte LP, Ferguson SJ. The effect of cement augmentation on the load transfer in an osteoporotic functional spinal unit: Finite-element analysis. Spine 2003;28:991-996. (Pubitemid 36583327)
9. Sun K, Liebschner MAK. Optimization of Bone Cement Properties in Vertebral Reinforcement, 13th Interdisciplinary Research Conference on Biomaterials GRIBOI, 2003.
10. Lewis G. Properties of acrylic bone cement: State-of-the-art review. J Biomed Mater Res 1997;38:155-182. (Pubitemid 27233104)
11. Dahl OE, Garvik LJ, Lyberg T. Toxic effects of methylmethacrylate monomer on leukocytes and endothelial cells in vitro. Acta Orthop Scand 1995;66:387.
12. Deramond H, Wrigth NT, Belkoff SM. Temperature elevation caused by bone cement polymerization during vertebroplasty. Bone 1999;25:17S-21S. (Pubitemid 29333172)
13. Belkoff SM, Molloy S. Temperature measurement during polymerization of polymethyl-methacrylate cement used for vertebroplasty. Spine 2003;28:1555-1559. (Pubitemid 36877090)
14. De Wijn JR. Poly(methyl methacrylate)-aqueous phase blends: In situ curing porous materials. J Biomed Mater Res 1976; 10:625-635.
15. Boger A, Bisig A, Bohner M, Heini P, Schneider E. Variation of the mechanical properties of PMMA to suit osteoporotic cancellous bone. J Biomater Sci Polym Edn 2008;19:1125-1142.
16. Wintermantel E. Injectable open porous biomaterial for interbody fusion in spine surgery [104-106], Chapter 3.6. Speidel MO, Uggowitzer PJ, editors. Materials in Medicine. ETH Zü rich: Hochschulverlag AG ETH Zürich; 1998. pp 47-53.
17. Boger A, Bohner M, Heini P, Verrier S, Schneider E. Properties of an injectable low modulus PMMA bone cement for osteoporotic bone. J Biomed Mater Res B 2008;86B:474-482.
18. Beck S, Boger A. Evaluation of the particle release of porous PMMA cements during curing. 2008. submitted for publication.
19. Weber FE, McKenzie G, Hardwick B, San Miguel B, Ghayor C, Ehrbar M, Grätz KW. A bioactive biodegradable guided bone regeneration membrane: From the bench to the dental practice. Eur Cells Mater 2007;13:21.
20. Weber FE, San Miguel B, Ghayor C, Ehrbar M. Small chemicals to enhance bone repair. Eur Cells Mater 2007;13:20.
21. Wheeler KD, Schenk B, Boger A, Heini P. Clinical investigation of PMMA cement viscosity during vertebroplasty, Proceeding Orthopaedic Research Society 2007, San Diego, USA.