Comparative study on the behavior of woven-ply reinforced thermoplastic or thermosetting laminates under severe environmental conditions

Materials and Design

Volumn 35, Issue , 2012, Pages 707-719

  Vieille, B ^a   Aucher, J ^a   Taleb, L ^a  

^a Site Universitaire Du Madrillet   (France)

Author keywords

A. Polymers; D. Mechanical fastening; E. Environmental performance

Indexed keywords

AIRCRAFT STRUCTURE; BEARING STRENGTHS; CARBON FIBER FABRICS; COMPARATIVE STUDIES; DOUBLE LAP JOINT; DUCTILE BEHAVIOR; E. ENVIRONMENTAL PERFORMANCE; ENVIRONMENTAL CONDITIONS; EPOXY MATRICES; FIBER/MATRIX INTERFACE; HYGROTHERMAL AGING; MECHANICAL BEHAVIOR; MECHANICAL FASTENING; MECHANICAL TESTS; OPEN HOLES; REINFORCED THERMOPLASTICS; SINGLE LAP JOINTS; STRAIN GRADIENTS; STRESS STATE;

BOLTED JOINTS; ENVIRONMENTAL MANAGEMENT; IMPACT STRENGTH; MECHANICAL PROPERTIES; REINFORCED PLASTICS; STIFFNESS MATRIX; THERMOPLASTICS; THERMOSETS;

LAMINATES;

EID: 81055138898     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2011.10.037     Document Type: Article

References (47)

1. Spruiell JE, Janke CJ. A review of the measurement and development of crystallinity and its relation to properties in neat poly(phenylene sulfide) PPS and its fiber reinforced composites. In: Technical report of the US department of energy, metals and ceramics division, ORNL/TM-2004/304; 2004.
2. Fiedler B, Hobbiebrunken T, Hojo M, Schulte K. Influence of stress state and temperature on the strength of epoxy resins. In: ICF11, eleventh international conference on fracture, Turin, Italy; March 20-25, 2005.
3. Hancox N.L. Overview of effects of temperature and environment on performance of PMC properties. Plastics Rub Comp Proc Appl 1998, 27(3):97-106.
4. Kawai M., Yajima S., Hachinohe A., Kawase Y. High-temperature effect axis fatigue behaviour of UD CFR composites with different resin matrices. Compos Sci Technol 2001, 61:1285-1302.
5. Kawai M., Masuko Y., Kawase Y., Negishi R. Micromechanical analysis of the off-axis rate-dependent inelastic behavior of UD AS4/PEEK at high temperature. Int J Mech Sci 2001, 43:2069-2090.
6. Myers F.A. Stress-state effects on the viscoelastic response of PPS based thermoplastic composites. Adv Thermoplast Mat Compos Mater, ASTM STP 1989, 1044:154-162.
7. Uematsu Y., Kitamura T., Ohtani R. Delamination behavior of CFR TP polymer at high temperatures. Compos Sci Technol 1995, 53:333-341.
8. Reifsnider K, Case S. Strength-based predictive methods for large-scale combined degradation effects. In: Structures, structural dynamics, and materials conference and exhibit, 39th, Long Beach, CA; April 20-23, 1998.
9. Loverich J.S., Russell B.E., Case S.W., Reifsnider K.L. Life prediction of PPS composites subjected to cyclic loading at high temperatures. Time dependent and nonlinear effects. Polym Compos, ASTM STP 2000, 1357:310-317.
10. Mahieux C.A., Scheurer C. High temperature bending stress rupture behavior AS4/APC2 and comparison with AS4/PPS. Composites Part A 2002, 33:935-938.
11. Den S., Li X., Lin H., Weitsman J. The non-linear response of quasi-isotropic composite laminates. Compos Sci Technol 2004, 64:1577-1585.
12. Ha S.K., Wang Q., Chang F.-K. Modeling the viscoplastic behavior of fiber-reinforced thermoplastic matrix composites at elevated temperatures. J Compos Mater 1991, 25(4):334-374.
13. Jen M.H.R., Tseng Y.C., Chang S.C., Chen M. Mechanical properties in notched AS4/PEEK APC2 composite laminates at elevated temperature. J Compos Mater 2006, 40(11):955-969.
14. Cowley K.D., Beaumont P.W.R. Damage accumulation at notches and the fracture stress of CFP composites: combined effects of stress and temperature. Compos Sci Technol 1997, 57(9-10):1211-1219.
15. Meyer D, Bersee H, Beukers A. Temperature effect on reinforced thermoplastic composite properties for primary aircraft structure applications. In: Forty ninth structures, structural dynamics, and materials conference, Schaumburg, IL; April, 2008.
16. Vieille B., Aucher J., Taleb L. Influence of temperature on the behavior of carbon fiber fabrics reinforced PPS laminates. Mater Sci Eng A 2009, 517:51-60.
17. Miyano Y., McMurray M.K., Enyama J., Nakada M. Loading rate and temperature dependence of flexural fatigue behavior of a satin woven CFRP laminate. J Compos Mater 1994, 28(4):1250-1260.
18. McLaughlin PVD, McShane HA, Cochran R, Armstrong-Carroll E. Effects of high heat on the strength and fatigue life of unidirectional polymer-matrix composites. In: ASME aerospace and materials divisions, AD-51/MD-73; 1996. p. 427-41.
19. Abot J.L., Yasmin A., Jacobsen A.J., Daniel I.M. In-plane mechanical, thermal and viscoelastic properties of satin fabric carbon/epoxy composite. Compos Sci Technol 2004, 64(2):263-268.
20. Kawai M., Taniguchi T. Off-axis fatigue behavior of plain weave carbon/epoxy fabric laminates at room and high temperatures and its mechanical modeling. Composites Part A 2006, 37:243-256.
21. Kawai M., Morishita M., Fuzi K., Sakurai T., Kemmochi K. Effects of matrix ductility and progressive damage on fatigue strengths of unnotched and notched carbon fibre plain woven roving fabric laminates. Composites Part A 1996, 27(6):493-502.
22. Haque A., Jeelani S. Environmental effects on the compressive properties. TS vs. TP composites. J Reinf Plast Compos 1992, 11(2):146-157.
23. Mohd Ishak Z.A., Ariffin A., Senawi R. Effects of hygrothermal aging and a silane coupling agent on the tensile properties of injection molded short glass fiber reinforced poly(butylene terephthalate) composites. Eur Polym J 2001, 37(8):1635-1647.
24. Lou A.Y., Murtha T.P. Environmental effects on glass fiber reinforced PPS stampable composites. J Mater Eng 1988, 10(2):109-116.
25. Hoa S., Lin S., Chen J. Effects of moisture content on the mechanical properties of PPS composite materials. Adv TP Mat Compos Mater, ASTM STP 1989, 1044.
26. Ma C.C.M., Yur S.W. Environmental effects on the water absorption and mechanical properties of CFR PPS and PEEK composites. Polym Eng Sci 1991, 31(1):34-39.
27. Munson-McGee S.H. Effects of hygrothermal exposure on the mechanical properties of injection molded glass-fiber reinforced PPS. Polym Compos 2004, 17(3):393-399.
28. Meyer M.R., Latour R.A., Shutte H.D. Long-term durability of fiber/matrix interfacial bonding in hygrothermal environments. J Therm Compos Mater 1994, 7(3):180-191.
29. Franco L.A.L., Graça M.L.A., Silva F.S. Fractography analysis and fatigue of TP composite laminates at different environmental conditions. Mater Sci Eng A 2008, 488:505-513.
30. Test standard EN 6035: aerospace series - fiber-reinforced plastics - test method - determination of notched and unnotched tensile strength.
31. Test standard EN 6037: aerospace series - fiber-reinforced plastics - test method - determination of bearing strength.
32. Vieille B., Taleb L. About the influence of temperature and matrix ductility on the behavior of carbon woven-ply PPS or epoxy laminates: notched and unnotched laminates. Compos Sci Technol 2011, 71:998-1007.
33. Totry E., Molina-Aldareguia J.M., Gonzalez C., LLorca J. Effect of fiber, matrix and interface properties on the in-plane shear deformation of CFR composites. Compos Sci Technol 2010, 70(6):970-980.
34. Karayaka M., Kurath P. Deformation and failure behavior of woven composite laminates. ASME J Eng Mater Technol 1994, 116(2):222-232.
35. Osada T., Nakai A., Hamada H. Initial fracture behavior of satin woven fabric composites. Compos Struct 2003, 61:333-339.
36. Touchard-Lagattu F., Lafarie-Frenot M.C. Damage and inelastic deformation mechanisms in notched TS and TP laminates. Compos Sci Technol 1996, 56(5):557-568.
37. Thoppul S.D., Finegan J., Gibson R.F. Mechanics of mechanically fastened joints in polymer-matrix composite structures - a review. Compos Sci Technol 2009, 69:301-329.
38. Park H.-J. Effects of stacking sequence and clamping force on the bearing strengths of mechanically fastened joints in composite laminates. Compos Struct 2001, 53:213-221.
39. Gohorianu G. Interaction entre les défauts d'usinage et la tenue en matage d'assemblages boulonnés en C/Epoxy. In: PhD Thesis n 3248 of the Université Paul Sabatier, Toulouse III; 2008.
40. Yylmaz Y., Synmazcelik T. Investigation of load bearing performances of pin connected C/PPS composites under static loading conditions. Mater Des 2007, 28:520-527.
41. Kallmeyer A.R., Stephens R.I. Creep elongation of bolt holes subjected to bearing loads in a polymer-matrix composite laminate. Compos Mater: Fatigue Fract, ASTM STP 1997, 1285(6):452-467.
42. Hirano N., Takao Y., Wang W.X. Effects of temperature on the bearing strength of CF/epoxy Pinned joints. J Compos Mater 2007, 41(3):335-351.
43. Kim K.Y., Whitney J.M. Effect of temperature and moisture on pin bearing strength of composite laminates. J Compos Mater 1976, 10:149-155.
44. Parida B.K., Prakash R.V., Mangalgiri P.D., Vijayaraju K. Influence of environmental and geometric parameters on the behavior of fastener joints in advanced composites. Compos Mater: Fatigue Fract, ASTM STP 1997, 1285:432-451.
45. Counts W.A., Johnson W.S. Temperature effects on ultimate bearing strength of polymeric composite joints. J Compos Technol Res 2002, 24(1):17-23.
46. Xiao Y., Ishikawa T. Bearing strength and failure behavior of bolted composite joints (Part I: experimental investigation). Compos Sci Technol 2005, 65:1022-1031.
47. Lawlor V.P., Stanley W.F., McCarthy M.A. Characterization of damage development in single-shear bolted composite joints. J Plast Rub Comp 2002, 31(3):126-133.