The effect of dentin desensitizer on shear bond strength of conventional and self-adhesive resin luting cements after aging

Operative Dentistry

Volumn 36, Issue 5, 2011, Pages 492-501

  Stawarczyk, B ^a   Hartmann, R ^b   Hartmann, L ^b   Roos, M ^c   Ozcan M ^a   Sailer, I ^a   Hammerle C H F ^a  

^a UNIVERSITY OF ZURICH   (Switzerland)

^b NONE

^c UNIVERSITY OF ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CLEARFIL PORCELAIN BOND; CLEARFIL SE BOND; DENTIN BONDING AGENT; DESENSITIZING AGENT; G CEM RESIN CEMENT; G-CEM RESIN CEMENT; GLUMA DESENSITIZER; GLUTARALDEHYDE; MACROGOL DERIVATIVE; METHACRYLIC ACID DERIVATIVE; PANAVIA TPN S; PANAVIA TPN-S; PHOSPHATE; POLYMETHACRYLIC ACID DERIVATIVE; RELY X UNICEM; RELYX ARC; RESIN CEMENT; TOOTH CEMENT; WATER;

ARTICLE; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL PROCEDURE; DENTIN; HUMAN; INSTRUMENTATION; MECHANICAL STRESS; METHODOLOGY; POLYMERIZATION; RANDOMIZED CONTROLLED TRIAL; SCOTCHBOND; SHEAR STRENGTH; TEMPERATURE; TIME; ULTRASTRUCTURE;

ACID ETCHING, DENTAL; BISPHENOL A-GLYCIDYL METHACRYLATE; DENTAL BONDING; DENTAL CEMENTS; DENTAL STRESS ANALYSIS; DENTIN; DENTIN DESENSITIZING AGENTS; DENTIN-BONDING AGENTS; GLUTARAL; HUMANS; METHACRYLATES; PHOSPHATES; POLYETHYLENE GLYCOLS; POLYMERIZATION; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SHEAR STRENGTH; STRESS, MECHANICAL; TEMPERATURE; TIME FACTORS; WATER;

EID: 80855156902     PISSN: 03617734     EISSN: None     Source Type: Journal    
DOI: 10.2341/10-292-L     Document Type: Article

References (50)

1. Bernal G, Jones RM, Brown DT, Munoz CA, & Goodacre CJ (1993) The effect of finish line form and luting agent on the breaking strength of Dicor crowns International Journal of Prosthodontics 6(3) 286-290.
2. Christensen GJ. (1999) Porcelain-fused-to-metal vs. nonmetal crowns Journal of American Dental Association 130(3) 409-411.
3. Malament KA, & Socransky SS (2001) Survival of Dicor glass-ceramic dental restorations over 16 years. Part III: Effect of luting agent and tooth or tooth-substitute core structure Journal of Prosthetic Dentistry 86(5) 511-519. (Pubitemid 33624189)
4. Burke FJ, Fleming GJ, Nathanson D, & Marquis PM (2002) Are adhesive technologies needed to support ceramics? An assessment of the current evidence Journal of Adhesive Dentistry 4(1) 7-22. (Pubitemid 44146462)
5. Stewart GP, Jain P, & Hodges J (2002) Shear bond strength of resin cements to both ceramic and dentin. Journal of Prosthetic Dentistry 88(3) 277-284. (Pubitemid 40433857)
6. Behr M, Rosentritt M, Mangelkramer M, & Handle G (2003) The influence of different ceramics on the fracture resistance and marginal adaptation of all-ceramic and fiber-reinforced crowns International Journal of Prosthodontics 16(5) 538-542. (Pubitemid 37229709)
7. Gardolle DA, Mortier E, Jacquot B, & Panighi MM (2008) Water sorption and water solubility of current luting cements: An in vitro study Quintessence International 39(3) e107-e114.
8. Shortall AC, Fayyad MA, & Williams JD (1989) Marginal seal of injection-molded ceramic crowns cemented with three adhesive systems Journal of Prosthetic Dentistry 61(1) 24-27.
9. White SN, Sorensen JA, Kang SK, & Caputo AA (1992) Microleakage of new crowns and fixed partial denture luting agents Journal of Prosthetic Dentistry 67(1) 156-161.
10. White SN, Yu Z, Tom JF, & Sangsurasak S (1994) In vivo microleakage of luting cements for cast crowns Journal of Prosthetic Dentistry 71(4) 333-338.
11. Li ZC, & White SN (1999) Mechanical properties of dental luting cements Journal of Prosthetic Dentistry 81(5) 597-609.
12. Behr M, Rosentritt M, Regnet T, Lang R, & Handel G (2004) Marginal adaptation in dentin of a self-adhesive universal resin cement compared with well-tried systems Dental Materials 20(2) 191-197.
13. Karaagaclioglu L, & Yilmaz B (2008) Influence of cement shade and water storage on the final color of leucitereinforced ceramics Operative Dentistry 33(4) 386-391.
14. Bayle MA, Gregoire G, & Sharrock P (2007) The role of acrylophosphonic acid monomers in the formation of hybrid layers based on self-etch adhesive Journal of Dentistry 35(4) 302-308.
15. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, & Van Meerbeek B (2004) Bonding of an auto-adhesive luting material to enamel and dentin Dental Materials 20(10) 963-971. (Pubitemid 40146126)
16. Abo-Hamar SE, Hiller KA, Jung H, Federlin M, Friedl KH, & Schmalz G (2005) Bond strength of a new universal self-adhesive resin luting cement to dentin and enamel Clinical Oral Investigations 9(3) 161-167. (Pubitemid 41258717)
17. Holderegger C, Sailer I, Schuhmacher C, Schlapfer R, Hämmerle CHF, & Fischer J (2008) Shear bond strength of resin cements to human dentin Dental Materials 24(7) 944-950.
18. Erdemir U, Sar-Sancakli H, Yildiz E, Ozel S, & Batur B (2011) An in vitro comparison of different adhesive strategies on the micro push-out bond strength of a glass fiber post Medicina Oral Patologia Oral Cirurgia Bucal [Epub ahead]
19. Lüthy H, Loeffel O, & Hämmerle CHF (2006) Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dental Materials 22(2) 195-200. (Pubitemid 43061319)
20. Yang B, Ludwig K, Adelung R, & Kern M (2006) Microtensile bond strength of three luting resins to human regional dentin Dental Materials 22(1) 45-56. (Pubitemid 41808725)
21. Richardson D, Tao L, & Pashley DH (1991) Dentin permeability: effect of crown preparation International Journal of Prosthodontics 4(3) 219-225.
22. Pashley DH, & Pashley EL (1991) Dentin permeability and restorative dentistry: A status report for the American Journal of Dentistry American Journal of Dentistry 4(1) 5-9.
23. Zach L, & Cohen G (1962) Thermogenesis in operative techniques: Comparison of four methods Journal of Prosthetic Dentistry 12(5) 977-984.
24. Camps J, Pizaht S, Dejou J, & Franqiun JC (1998) Effects of desensitizing agents on human dentin permeability American Journal of Dentistry 11(6) 286-290. (Pubitemid 128505218)
25. Felton DA, Bergenholtz G, & Kanoy B (1991) Evaluation of the desensitizing effect of Gluma Dentin Bond on teeth prepared for complete-coverage restorations International Journal of Prosthodontics 4(3) 292-298.
26. Watanabe T, Sano M, Itoh K, & Wakumoto S (1991) The effect of primers on the sensitivity of dentin Dental Materials 7(3) 148-150.
27. Dondi dall'Orologio G, & Malferrari S (1993) Desensitizing effects of Gluma Primer and Gluma 2000 on hypersensitive dentin American Journal of Dentistry 6(6) 283-286.
28. Schüpbach P, Lutz F, & Finger WJ (1997) Closing of dentinal tubules by Gluma desensitizer European Journal of Oral Science 105(5 Part 1) 414-421. (Pubitemid 127760434)
29. Bowes JH, & Cater CW (1966) The reaction of glutaraldehyde with protein and other biological materials Journal of Royal Microscopical Society 85(2) 193-200.
30. Yim NH, Rueggeberg FA, Caughman WF, Gardner FM, & Pashley DH (2000) Effect of dentin desensitizers and cementing agents on retention of full crowns using standardized crown preparation. Journal of Prosthetic Dentistry 83(4) 459-465.
31. Huh JB, Kim JH, Chung MK, Lee HY, Choi YG, & Shim JS (2008) The effect of several dentin desensitizers on shear bond strength of adhesive resin luting cement using self-etching primer Journal of Dentistry 36(12) 1025-1032.
32. Sailer I, Tettamanti S, Stawarczyk B, Fischer J, & Hämmerle CH (2010) In vitro study of the influence of dentin desensitizing and sealing on the shear bond strength of two universal resin cements Journal of Adhesive Dentistry 12(5) 381-392.
33. Meiers JC, Griffo TE, & Miller GA (1992) Antimicrobial activity of dentin bonding systems and glass ionomers Journal of Dental Research 71(Supplement 1) Abstract #1639.
34. Schmidlin PR, Zehnder M, Gohring TN, & Waltimo TM (2004) Glutaraldehyde in bonding systems disinfects dentin in vitro Journal of Adhesive Dentistry 6(1) 61-64. (Pubitemid 38541513)
35. Munksgaard EC, & Asmussen E (1984) Bond strength between dentin and restorative resins mediated by mixtures of HEMA and glutaraldehyde Journal of Dental Research 63(8) 1087-1089.
36. Nakabayashi N, Watanabe A, & Gendusa NJ (1992) Dentin adhesion of modified 4-META/MMA-TBB resin: function of HEMA Dental Materials 8(4) 259-264.
37. Erickson RL (1989) Mechanism and clinical implications of bond formation for two dentin bonding agents American Journal of Dentistry (Supplement 2) 117-123.
38. Edler TL, Krikorinon E, & Thompson VP (1991) FITR surface analysis of dentin and dentin bonding agents Journal of Dental Research 70(Supplement 1) Abstract #1534.
39. Dagostin A, & Ferrari M (2002) Effect of resin sealing of dentin on the bond strength of ceramic restorations Dental Materials 18(4) 304-310. (Pubitemid 40072262)
40. Salz U, Zimmermann J, Zeuner F, & Moszner N (2005) Hydrolytic stability of self-etching adhesive systems Journal of Adhesive Dentistry 7(2) 107-116. (Pubitemid 40977232)
41. ISO/TS 11405: 2003. Dental materials-Testing of adhesion to tooth structure. Brussels, Belgium: European Committee for Standardization http://www.iso.org/iso/ store.htm
42. Aguiar TR, Francescantonio M, Ambrosano GM, & Giannini M (2010) Effect of curing mode on bond strength of self-adhesive resin luting cements to dentin Journal of Biomedical Materials Research Part B Applied Biomaterials 93(1) 122-127.
43. Cobb DS, Reinhardt JW, & Vargas MA (1997) Effect of HEMA-containing dentin desensitizers on shear bond strength of a resin cement American Journal of Dentistry 10(2) 62-65. (Pubitemid 127500111)
44. Soeno K, Taira Y, Matsumura H, & Atsuta M (2001) Effect of desensitizers on bond strength of adhesive luting agents to dentin Journal of Oral Rehabilitation 28(12) 1122-1128. (Pubitemid 33754566)
45. Aranha AC, Siqueira Junior Ade S, Cavalcante LM, Pimenta LA, & Marchi GM (2006) Microtensile bond strengths of composite to dentin treated with desensitizer products Journal of Adhesive Dentistry 8(2) 85-90. (Pubitemid 43652293)
46. Viotti RG, Kasaz A, Pena CE, Alexandre RS, Arrais CA, & Reis AF (2009) Microtensile bond strength of new selfadhesive luting agents and conventional multistep systems The Journal of Prosthetic Dentistry 102(5) 306-312.
47. Monticelli F, Osorio R, Mazzitelli C, Ferrari M, & Toledano M (2008) Limited decalcification/diffusion of self-adhesive cements into dentin Journal of Dental Research 87(10) 974-979.
48. Oilo G (1993) Bond strength testing-What does it mean? International Dental Journal 43(5) 492-498.
49. Triolo PT, Kelsey WP, & Barkmeier WW (1995) Bond strength with various dental substrates Journal of Prosthetic Dentistry 74(5) 463-468.
50. Pashley DH, Ciucchi B, Sano H, Carvalho RM, & Russell CM (1995) Bond strength versus dentin structure: A modelling approach Archives of Oral Biology 40(12) 1109-1118.