Mechanical and microstructural properties of heat cured alkali-activated slag mortars

Materials and Design

Volumn 35, Issue , 2012, Pages 374-383

  Aydin, Serdar ^a   Baradan, Bülent ^a  

^a DOKUZ EYLUL UNIVERSITY   (Turkey)

Author keywords

A. Concrete; C. Heat treatments; E. Mechanical properties; F. Microstructure

Indexed keywords

ALKALI ACTIVATED SLAGS; ALKALI CONTENTS; AUTOCLAVE CURING; CURING METHODS; DRYING SHRINKAGES; F. MICROSTRUCTURE; HIGH STRENGTH; MECHANICAL PERFORMANCE; MICROSTRUCTURAL PROPERTIES; MICROSTRUCTURE FORMATION; PROPERTIES AND MICROSTRUCTURES; SODIUM HYDROXIDES; SODIUM SILICATE; STEAM CURING;

CONCRETE MIXTURES; CURING; MICROSTRUCTURE; MORTAR; SILICON COMPOUNDS; SLAGS; SODIUM;

MECHANICAL PROPERTIES;

EID: 80155190302     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2011.10.005     Document Type: Article

References (40)

1. Davidovits J. Geopolymers: inorganic polymeric new materials. J Therm Anal 1991, 37:1633-1656.
2. Wongpa J., Kiattikomol K., Jaturapitakkul C., Chindaprasirt P. Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete. Mater Des 2010, 31:4748-5754.
3. Pacheco-Torgal F., Castro-Gomes J., Jalali S. Alkali-activated binders: a review. Part 2. About materials and binders manufacture. Constr Build Mater 2008, 22:1315-1322.
4. Shi C., Krivenko P.V., Roy D. Alkali-activated cements and concretes 2006, Taylor and Francis, USA and Canada.
5. Bondar D., Lynsdale C.J., Milestone N.B., Hassani N., Ramezanianpour A.A. Effect of type, form, and dosage of activators on strength of alkali-activated natural pozzolans. Cem Concr Compos 2011, 33:251-260.
6. Bakharev T., Sanjayan J.G., Cheng Y.B. Alkali activation of Australian slag cements. Cem Concr Res 1999, 29:113-120.
7. Fernandez-Jimenez A., Palomo J.G., Puertas F. Alkali-activated slag mortars-mechanical strength behavior. Cem Concr Res 1999, 29:1313-1321.
8. Bakharev T., Sanjayan J.G., Cheng Y.B. Sulfate attack on alkali-activated slag concrete. Cem Concr Res 2002, 32:211-216.
9. Bakharev T., Sanjayan J.G., Cheng Y.B. Resistance of alkali-activated slag concrete to acid attack. Cem Concr Res 2003, 33:1607-1611.
10. Puertas F., Amat T., Fernandez-Jimenez A., Vazquez T. Mechanical and durable behaviour of alkalin cement mortars reinforced with polypropylene fibres. Cem Concr Res 2003, 33:2031-2036.
11. Shi C., Xie P. Interface between cement paste and quartz sand in alkali-activated slag mortars. Cem Concr Res 1998, 28:887-896.
12. Zivica V. Effects of type and dosage of alkalin activator and temperature on the properties of alkali-activated slag mixtures. Constr Build Mater 2007, 21:1463-1469.
13. Collins F.G., Sanjayan J.G. Workability and mechanical properties of alkali activated slag concrete. Cem Concr Res 1999, 29:455-458.
14. Xu B, Pu X. Study on solid alkaline AAS cement. In: Krivenko, editor. Second international conference on alkaline cements and concretes, Kiev, Ukraine, 1999. p. 58-63.
15. Bakharev T., Sanjayan J.G., Cheng Y.B. Resistance of alkali-activated slag concrete to carbonation. Cem Concr Res 2001, 31:1277-1283.
16. Fernandez-Jimenez A., Puertas F. The alkali-silica reaction in alkali-activated granulated slag mortars with reactive aggregate. Cem Concr Res 2002, 32:1019-1024.
17. Bakharev T., Sanjayan J.G., Cheng Y.B. Resistance of alkali-activated slag concrete to alkali-aggregate reaction. Cem Concr Res 2001, 31:331-334.
18. Neville A.M. Properties of concrete 1995, England, Prentice Hall.
19. Mindess S., Young J.F., Darwin D. Concrete 2002, Prentice Hall. 2nd ed.
20. Pu X.C., Gan C.C., Wang S.D., Yang C.H. Summary reports of research on alkali-activated slag cement and concrete 1988, vol. 1-6. Chongqing Institute of Architecture and Engineering, Chongqing.
21. Glukhovsky V.D., Pakhomov V.A. Slag-alkali cements and concretes 1978, Budivelnik Publishers, Kiev, Russia, (in Russian).
22. Wang S., Scrivener K.L., Pratt P.L. Factors affecting the strength of alkali-activated slag. Cem Concr Res 1994, 24:1033-1043.
23. ASTM C 305-99. Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency. Annual book of ASTM; 2002.
24. ASTM C 348-97. Standard test method for flexural strength of hydraulic-cement mortars. Annual book of ASTM; 2002.
25. ASTM C 349-97. Standard test method for compressive strength of hydraulic-cement mortars (using portions of prisms broken in flexure). Annual book of ASTM; 2002.
26. ASTM C 596-01. Standard test method for drying shrinkage of mortar containing hydraulic cement. Annual book of ASTM; 2004.
27. Aydin S. Development of a fiber reinforced composite with alkali activated ground granulated blast furnace slag. PhD thesis. Dokuz Eylul University; 2010.
28. Aldea C.M., Young F., Wang K., Shah S.P. Effects of curing conditions on properties of concrete using slag replacement. Cem Concr Res 2000, 30:465-472.
29. Shi C., Hu S. Cementitious properties of ladle slag fines under autoclave curing conditions. Cem Concr Res 2004, 33:1851-1856.
30. 2O pressure up to 200°C. Cem Concr Res 2003, 33:271-279.
31. Yang Q., Zhang S., Huang S., He Y. Effect of ground quartz sand on properties of high-strength concrete in the steam-autoclaved curing. Cem Concr Res 2000, 30:1993-1998.
32. Puertas F., Fernandez-Jimenez A., Blanco-Varela M.T. Pore solution in alkali-activated slag cement pastes. Relation to the composition and structure of calcium silicate hydrate. Cem Concr Res 2004, 34:139-148.
33. Bakharev T., Sanjayan J.G., Cheng Y.B. Effect of admixtures on properties of alkali-activated slag concrete. Cem Concr Res 2000, 30:1367-1374.
34. Shi C., Wu X., Tang M. Hydration of alkali-slag cements at 150°C. Cem Concr Res 1991, 21:91-100.
35. Uzal B., Turanli L., Yücel H., Göncüoĝlu M.C., çulfaz A. Pozzolanic activity of clinoptilolite: a comparative study with silica fume, fly ash and a non-zeolitic natural pozzolan. Cem Concr Res 2010, 40:398-404.
36. Malolepszy J. Some aspects of alkali activated cementitious materials setting and hardening. In: Proceeding, 3rd Beijing international symposium on cement and concrete, vol. 2; 1993. p. 1043-6.
37. Atiş C.D., Bilim C., çelik ö, Karahan O. Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar. Constr Build Mater 2009, 23:548-555.
38. Cincotto Neto.A., MA Repette.W. Drying and autogenous shrinkage of pastes and mortars with activated slag cement. Cem Concr Res 2008, 38:565-574.
39. Wang S.D., Scrivener K.L., Pratt P.L. Factors affecting the strength of alkali-activated slag. Cem Concr Res 1994, 24:1033-1043.
40. Bakharev T., Sanjayan J.G., Cheng Y.B. Effect of elevated temperature curing on properties of alkali-activated slag concrete. Cem Concr Res 1999, 29:1619-1625.